### lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=ftdi_sio, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M ### Installed packages: ii armbian-config 20.11.6 all Armbian configuration utility ii armbian-firmware 20.11.3 all Linux firmware ii armbian-stretch-desktop 20.11.6 all Armbian desktop for Debian stretch ii armbian-tools-stretch 5.75 armhf Armbian tools, Cubie bt utils ii hostapd 3:2.9-102~armbian20.05.2+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator ii htop 3.1.0-0~armbian20.08.2+1 armhf interactive processes viewer ii linux-base 4.5 all Linux image base package ii linux-dtb-next-sunxi 5.92 armhf Linux DTB, version 4.19.62-sunxi ii linux-image-next-sunxi 5.92 armhf Linux kernel, version 4.19.62-sunxi ii linux-libc-dev 5.70 armhf Linux support headers for userspace development ii linux-stretch-root-next-bananapi 5.90 armhf Armbian tweaks for stretch on bananapi (next branch) ii linux-u-boot-bananapi-next 5.90 armhf Uboot loader 2019.04 ii sunxi-tools 1.4.2-2~armbian5.98+1 armhf tools for working with Allwinner (sunxi) ARM processors ### Loaded modules: Module Size Used by fuse 73728 5 ftdi_sio 40960 1 usbserial 24576 3 ftdi_sio sun4i_gpadc_iio 16384 0 zstd 16384 2 lima 40960 0 gpu_sched 20480 1 lima ttm 57344 1 lima evdev 20480 3 axp20x_usb_power 16384 0 axp20x_battery 16384 0 axp20x_adc 16384 0 industrialio 49152 4 axp20x_usb_power,axp20x_battery,sun4i_gpadc_iio,axp20x_adc sun4i_codec 32768 3 snd_soc_core 114688 1 sun4i_codec snd_pcm_dmaengine 16384 1 snd_soc_core snd_pcm 69632 3 sun4i_codec,snd_pcm_dmaengine,snd_soc_core snd_timer 24576 1 snd_pcm sun4i_ts 16384 0 snd 45056 7 snd_timer,snd_soc_core,snd_pcm soundcore 16384 1 snd sun4i_gpadc 16384 0 sunxi_cir 16384 0 sun4i_ss 24576 0 zram 24576 2 cpufreq_dt 16384 0 thermal_sys 57344 3 sun4i_ts,cpufreq_dt,sun4i_gpadc_iio uio_pdrv_genirq 16384 0 uio 16384 1 uio_pdrv_genirq bonding 94208 0 brcmfmac 159744 0 brcmutil 16384 1 brcmfmac cfg80211 393216 1 brcmfmac ip_tables 20480 0 x_tables 20480 1 ip_tables pinctrl_axp209 16384 0 realtek 16384 1 ### nand-sata-install.log: ### Current system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU PMIC DC-IN C.St. 21:03:41: --- 1.90 55% 13% 41% 0% 0% 0% 38.2°C 31.9°C 4.91V 0/6 21:03:42: --- 1.90 73% 21% 50% 1% 0% 0% 38.2°C 32.0°C 4.85V 0/6 21:03:44: --- 1.91 57% 17% 38% 1% 0% 0% 38.2°C 32.0°C 4.90V 0/6 21:03:46: --- 1.91 61% 13% 46% 1% 0% 0% 38.0°C 32.1°C 4.82V 0/6 21:03:47: --- 1.91 60% 22% 34% 3% 0% 0% 38.2°C 31.9°C 4.89V 0/6 21:03:52: --- 1.84 55% 13% 41% 0% 0% 0% 38.3°C 32.3°C 4.86V 0/6 21:03:54: --- 1.93 65% 19% 43% 2% 0% 0% 38.8°C 32.3°C 4.86V 0/6 21:03:55: --- 1.93 71% 21% 48% 2% 0% 0% 38.0°C 32.0°C 4.93V 0/6 21:03:57: --- 1.93 35% 13% 20% 1% 0% 0% 38.1°C 32.5°C 4.85V 0/6 21:03:58: --- 1.94 86% 21% 62% 1% 0% 0% 38.1°C 32.1°C 4.90V 0/6 ### resolv.conf lrwxrwxrwx 1 root root 31 Jun 10 2020 /etc/resolv.conf -> /etc/resolvconf/run/resolv.conf # Generated by NetworkManager search fritz.box nameserver XXX.XXX.10.1 ### Current sysinfo: Linux 4.19.62-sunxi (hnet-fhem-203) 02/15/2021 _armv7l_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 41.13 0.23 13.74 0.02 0.00 44.87 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn ram0 0.00 0.00 0.00 0 0 ram1 0.00 0.00 0.00 0 0 ram2 0.00 0.00 0.00 0 0 ram3 0.00 0.00 0.00 0 0 mmcblk0 1.18 3.14 6.49 316509 653824 mmcblk0p1 1.18 3.11 6.49 313385 653824 zram0 0.38 0.20 1.33 19720 133596 zram1 0.01 0.01 0.01 1180 1084 zram2 0.00 0.00 0.00 0 0 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 768 324132 33900 393580 0 0 2 4 75 4 41 14 45 0 0 total used free shared buff/cache available Mem: 997M 263M 316M 55M 417M 655M Swap: 498M 768K 498M NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 50M 3.1M 192.5K 532K 2 /var/log /dev/zram1 lzo 498.8M 316K 26.7K 208K 2 [SWAP] 21:04:00 up 1 day, 3:59, 5 users, load average: 1.94, 1.61, 1.56 [ 1.988967] sun4i-backend 1e40000.display-backend: Couldn't find matching frontend, frontend features disabled [ 1.989256] sun4i-drm display-engine: bound 1e40000.display-backend (ops 0xc0a845b8) [ 1.989693] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 1.989711] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0a83538) [ 1.990062] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 1.990078] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xc0a83538) [ 1.990969] sun4i-drm display-engine: bound 1c16000.hdmi (ops 0xc0a84fc4) [ 1.990982] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.990985] [drm] No driver support for vblank timestamp query. [ 1.990995] checking generic (7fe79000 178e00) vs hw (0 ffffffff) [ 1.990999] fb: switching to sun4i-drm-fb from simple [ 1.991127] Console: switching to colour dummy device 80x30 [ 2.491517] [drm] Cannot find any crtc or sizes [ 2.492143] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.496301] brd: module loaded [ 2.503612] loop: module loaded [ 2.559596] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 2.559636] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled [ 2.559666] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.559679] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc [ 2.561320] scsi host0: ahci-sunxi [ 2.561730] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 36 [ 2.564938] libphy: Fixed MDIO Bus: probed [ 2.565585] sun7i-dwmac 1c50000.ethernet: PTP uses main clock [ 2.565598] sun7i-dwmac 1c50000.ethernet: no reset control found [ 2.566809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.566815] ehci-platform: EHCI generic platform driver [ 2.567192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.567226] ohci-platform: OHCI generic platform driver [ 2.568122] usbcore: registered new interface driver usb-storage [ 2.569249] sunxi-rtc 1c20d00.rtc: registered as rtc0 [ 2.569256] sunxi-rtc 1c20d00.rtc: RTC enabled [ 2.569406] i2c /dev entries driver [ 2.570475] axp20x-i2c 1-0034: AXP20x variant AXP209 found [ 2.585100] input: axp20x-pek as /devices/platform/soc@1c00000/1c2ac00.i2c/i2c-1/1-0034/axp20x-pek/input/input0 [ 2.585808] ldo1: supplied by regulator-dummy [ 2.586116] ldo2: supplied by regulator-dummy [ 2.587203] ldo3: supplied by regulator-dummy [ 2.587867] ldo4: supplied by regulator-dummy [ 2.588065] ldo5: supplied by regulator-dummy [ 2.589088] dcdc2: supplied by regulator-dummy [ 2.589768] dcdc3: supplied by regulator-dummy [ 2.594079] axp20x-i2c 1-0034: Backup (RTC) battery charging is disabled [ 2.594214] axp20x-i2c 1-0034: AXP20X driver loaded [ 2.596898] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.598146] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2 [ 2.598585] ledtrig-cpu: registered to indicate activity on CPUs [ 2.598676] hidraw: raw HID events driver (C) Jiri Kosina [ 2.598846] usbcore: registered new interface driver usbhid [ 2.598851] usbhid: USB HID core driver [ 2.598875] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 2.600224] Initializing XFRM netlink socket [ 2.600967] NET: Registered protocol family 10 [ 2.621646] Segment Routing with IPv6 [ 2.621760] NET: Registered protocol family 17 [ 2.621793] NET: Registered protocol family 15 [ 2.621863] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.621919] 8021q: 802.1Q VLAN Support v1.8 [ 2.622288] Key type dns_resolver registered [ 2.622776] Registering SWP/SWPB emulation handler [ 2.623525] registered taskstats version 1 [ 2.623648] Loading compiled-in X.509 certificates [ 2.623770] zswap: loaded using pool lzo/zbud [ 2.624053] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 2.626711] Btrfs loaded, crc32c=crc32c-generic [ 2.631096] random: fast init done [ 2.637007] Key type encrypted registered [ 2.651343] sun7i-dwmac 1c50000.ethernet: PTP uses main clock [ 2.651360] sun7i-dwmac 1c50000.ethernet: no reset control found [ 2.651460] sun7i-dwmac 1c50000.ethernet: Linked as a consumer to regulator.14 [ 2.659581] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.662312] mmc0: new high speed SDHC card at address aaaa [ 2.663978] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 2.666920] mmcblk0: p1 [ 2.755841] sun7i-dwmac 1c50000.ethernet: Version ID not available [ 2.755857] sun7i-dwmac 1c50000.ethernet: DWMAC1000 [ 2.755866] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported [ 2.755873] sun7i-dwmac 1c50000.ethernet: Normal descriptors [ 2.755880] sun7i-dwmac 1c50000.ethernet: Ring mode enabled [ 2.774590] libphy: stmmac: probed [ 2.774614] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 2.774622] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 2.781569] sunxi-rtc 1c20d00.rtc: setting system clock to 2021-02-14 16:04:09 UTC (1613318649) [ 2.781844] of_cfs_init [ 2.781962] of_cfs_init: OK [ 2.782205] vcc3v0: disabling [ 2.782214] vcc5v0: disabling [ 2.782235] usb0-vbus: disabling [ 2.782240] usb1-vbus: disabling [ 2.782249] usb2-vbus: disabling [ 2.874103] ata1: SATA link down (SStatus 0 SControl 300) [ 2.877802] Freeing unused kernel memory: 1024K [ 2.878020] Run /init as init process [ 2.939006] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.939957] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.940107] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.635983] axp20x-gpio axp20x-gpio: DMA mask not set [ 3.636536] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded [ 4.495746] [drm] Cannot find any crtc or sizes [ 5.147865] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 5.761519] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.762114] systemd[1]: Detected architecture arm. [ 5.775285] systemd[1]: Set hostname to . [ 6.520236] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.521170] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.522718] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.523733] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.524421] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.525071] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.525753] systemd[1]: Listening on Journal Socket. [ 6.765548] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.808288] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.966224] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.967473] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.967486] platform regulatory.0: Falling back to syfs fallback for: regulatory.db [ 7.052319] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 7.500368] systemd-journald[216]: Received request to flush runtime journal from PID 1 [ 7.692881] cfg80211: failed to load regulatory.db [ 9.161344] cpu cpu0: Linked as a consumer to regulator.9 [ 9.161427] cpu cpu0: Dropping the link to regulator.9 [ 9.161690] cpu cpu0: Linked as a consumer to regulator.9 [ 9.503905] zram: Added device: zram0 [ 9.505365] zram: Added device: zram1 [ 9.508990] zram: Added device: zram2 [ 9.688376] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 9.751899] zram1: detected capacity change from 0 to 523026432 [ 9.825021] Registered IR keymap rc-empty [ 9.825161] rc rc0: sunxi-ir as /devices/platform/soc@1c00000/1c21800.ir/rc/rc0 [ 9.825329] input: sunxi-ir as /devices/platform/soc@1c00000/1c21800.ir/rc/rc0/input1 [ 9.844037] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 9.860357] sunxi-ir 1c21800.ir: initialized sunXi IR driver [ 9.965729] sun4i-codec 1c22c00.codec: ASoC: Failed to create component debugfs directory [ 9.976829] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 10.007809] Adding 510764k swap on /dev/zram1. Priority:5 extents:1 across:510764k SSFS [ 10.055345] axp20x-adc axp20x-adc: DMA mask not set [ 10.076353] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 10.080914] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set [ 10.107005] sun4i-usb-phy 1c13400.phy: Linked as a consumer to regulator.11 [ 10.107286] sun4i-usb-phy 1c13400.phy: Linked as a consumer to regulator.12 [ 10.107715] sun4i-usb-phy 1c13400.phy: Linked as a consumer to regulator.13 [ 10.108715] ehci-platform 1c14000.usb: EHCI Host Controller [ 10.108754] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 10.112146] ehci-platform 1c14000.usb: irq 32, io mem 0x01c14000 [ 10.131692] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 10.131999] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 10.132009] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.132015] usb usb1: Product: EHCI Host Controller [ 10.132021] usb usb1: Manufacturer: Linux 4.19.62-sunxi ehci_hcd [ 10.132027] usb usb1: SerialNumber: 1c14000.usb [ 10.132762] hub 1-0:1.0: USB hub found [ 10.132811] hub 1-0:1.0: 1 port detected [ 10.133946] ehci-platform 1c1c000.usb: EHCI Host Controller [ 10.133982] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 10.134588] ehci-platform 1c1c000.usb: irq 37, io mem 0x01c1c000 [ 10.147689] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 10.148067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 10.148077] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.148083] usb usb2: Product: EHCI Host Controller [ 10.148090] usb usb2: Manufacturer: Linux 4.19.62-sunxi ehci_hcd [ 10.148096] usb usb2: SerialNumber: 1c1c000.usb [ 10.148908] hub 2-0:1.0: USB hub found [ 10.148983] hub 2-0:1.0: 1 port detected [ 10.150189] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 10.150244] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 10.150864] ohci-platform 1c14400.usb: irq 33, io mem 0x01c14400 [ 10.210600] lima 1c40000.gpu: bus rate = 300000000 [ 10.210614] lima 1c40000.gpu: mod rate = 384000000 [ 10.212214] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 10.212233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.212239] usb usb3: Product: Generic Platform OHCI controller [ 10.212246] usb usb3: Manufacturer: Linux 4.19.62-sunxi ohci_hcd [ 10.212252] usb usb3: SerialNumber: 1c14400.usb [ 10.216201] hub 3-0:1.0: USB hub found [ 10.216281] hub 3-0:1.0: 1 port detected [ 10.217498] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 10.217539] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 10.223989] ohci-platform 1c1c400.usb: irq 38, io mem 0x01c1c400 [ 10.227853] [TTM] Zone kernel: Available graphics memory: 380508 kiB [ 10.227865] [TTM] Zone highmem: Available graphics memory: 510768 kiB [ 10.227869] [TTM] Initializing pool allocator [ 10.228864] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 10.228942] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 10.229009] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 10.229057] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 10.256539] [drm] Initialized lima 1.0.0 20170325 for 1c40000.gpu on minor 1 [ 10.290236] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 10.290252] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.290258] usb usb4: Product: Generic Platform OHCI controller [ 10.290265] usb usb4: Manufacturer: Linux 4.19.62-sunxi ohci_hcd [ 10.290271] usb usb4: SerialNumber: 1c1c400.usb [ 10.292145] hub 4-0:1.0: USB hub found [ 10.292230] hub 4-0:1.0: 1 port detected [ 10.293599] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 10.293692] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0 [ 10.294288] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 10.294305] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 10.311703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 10.311721] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.311727] usb usb5: Product: MUSB HDRC host driver [ 10.311734] usb usb5: Manufacturer: Linux 4.19.62-sunxi musb-hcd [ 10.311739] usb usb5: SerialNumber: musb-hdrc.1.auto [ 10.313630] hub 5-0:1.0: USB hub found [ 10.313691] hub 5-0:1.0: 1 port detected [ 10.467695] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 10.625105] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00 [ 10.625121] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.625127] usb 1-1: Product: USB 2.0 Hub [MTT] [ 10.628215] hub 1-1:1.0: USB hub found [ 10.628491] hub 1-1:1.0: 7 ports detected [ 10.636773] zram0: detected capacity change from 0 to 52428800 [ 10.915685] usb 1-1.4: new full-speed USB device number 3 using ehci-platform [ 11.036783] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 11.036799] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.036805] usb 1-1.4: Product: FT232R USB UART [ 11.036811] usb 1-1.4: Manufacturer: FTDI [ 11.036817] usb 1-1.4: SerialNumber: AK08UYBX [ 11.225939] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 13.526492] random: crng init done [ 13.526509] random: 7 urandom warning(s) missed due to ratelimiting [ 13.917233] usbcore: registered new interface driver usbserial_generic [ 13.917295] usbserial: USB Serial support registered for generic [ 13.930587] usbcore: registered new interface driver ftdi_sio [ 13.930660] usbserial: USB Serial support registered for FTDI USB Serial Device [ 13.931000] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected [ 13.931209] usb 1-1.4: Detected FT232RL [ 13.940229] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0 [ 21.907189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.919714] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 22.037274] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found [ 22.037291] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled [ 22.037304] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available [ 22.037313] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW [ 22.037838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.648337] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 28.648393] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 45.358166] fuse init (API version 7.27) [78159.272546] usb 1-1.4: USB disconnect, device number 3 [78159.273146] ftdi_sio ttyUSB0: error from flowcontrol urb [78159.277596] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [78159.277697] ftdi_sio 1-1.4:1.0: device disconnected [78163.096598] usb 1-1: USB disconnect, device number 2 [78170.499306] usb 3-1: new full-speed USB device number 2 using ohci-platform [78170.737512] usb 3-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [78170.737529] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [78170.737535] usb 3-1: Product: FT232R USB UART [78170.737541] usb 3-1: Manufacturer: FTDI [78170.737547] usb 3-1: SerialNumber: AK08UYBX [78170.750806] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected [78170.750994] usb 3-1: Detected FT232RL [78170.754928] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0 vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.drop_caches = 0 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3475 vm.mmap_min_addr = 4096 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 31589 vm.vfs_cache_pressure = 100 vm.watermark_scale_factor = 10 ### interrupts: CPU0 CPU1 18: 0 0 GICv2 29 Level arch_timer 19: 19895881 20657910 GICv2 30 Level arch_timer 22: 0 0 GICv2 54 Level timer@1c20c00 23: 0 0 GICv2 113 Level sun5i_timer0 24: 0 0 GICv2 152 Level arm-pmu 25: 0 0 GICv2 153 Level arm-pmu 26: 530 0 GICv2 59 Level 1c02000.dma-controller 27: 0 0 GICv2 42 Level sun4i-spi 28: 0 0 GICv2 76 Level 1c0c000.lcd-controller 29: 0 0 GICv2 77 Level 1c0d000.lcd-controller 30: 4818475 0 GICv2 64 Level sunxi-mmc 31: 0 0 GICv2 70 Level musb-hdrc.1.auto 32: 4891268 0 GICv2 71 Level ehci_hcd:usb1 33: 1414233 0 GICv2 96 Level ohci_hcd:usb3 36: 0 0 GICv2 88 Level ahci-sunxi[1c18000.sata] 37: 0 0 GICv2 72 Level ehci_hcd:usb2 38: 0 0 GICv2 97 Level ohci_hcd:usb4 41: 0 0 GICv2 56 Level 1c20d00.rtc 45: 260 0 GICv2 37 Level sunxi-ir 47: 96179 0 GICv2 61 Level sun4i_gpadc_irq_chip 48: 6 0 GICv2 33 Level ttyS0 49: 16 0 GICv2 36 Level 50: 13 0 GICv2 52 Level 51: 5262 0 GICv2 39 Level mv64xxx_i2c 52: 0 0 GICv2 41 Level mv64xxx_i2c 53: 0 0 GICv2 101 Level gp 54: 0 0 GICv2 102 Level gpmmu 55: 0 0 GICv2 103 Level pp0 56: 0 0 GICv2 104 Level ppmmu0 57: 0 0 GICv2 106 Level pp1 58: 0 0 GICv2 107 Level ppmmu1 60: 516313 0 GICv2 117 Level eth0 70: 1 0 sunxi_pio_edge 4 Edge usb0-id-det 76: 0 0 sunxi_pio_edge 10 Edge 1c0f000.mmc cd 98: 0 0 sunxi-nmi 0 Level axp20x_irq_chip 104: 0 0 axp20x_irq_chip 5 Edge axp20x-usb-power-supply 105: 0 0 axp20x_irq_chip 6 Edge axp20x-usb-power-supply 125: 0 0 axp20x_irq_chip 26 Edge axp20x-usb-power-supply 126: 0 0 axp20x_irq_chip 27 Edge axp20x-usb-power-supply 132: 0 0 axp20x_irq_chip 33 Edge axp20x-pek-dbr 133: 0 0 axp20x_irq_chip 34 Edge axp20x-pek-dbf 138: 96171 0 sun4i_gpadc_irq_chip 1 Edge temp_data 139: 0 0 sun4i_gpadc_irq_chip 0 Edge fifo_data IPI0: 0 0 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 1620446 3993691 Rescheduling interrupts IPI3: 4 11 Function call interrupts IPI4: 0 0 CPU stop interrupts IPI5: 25754 25919 IRQ work interrupts IPI6: 0 0 completion interrupts Err: 0