### Activated 1 lzo-rle zram swap devices with 1004 MB each ### Activated Armbian ramlog partition with zstd compression Fri Feb 5 17:17:23 GMT 2021 | Cubox i2eX/i4 | 21.02.1 | armhf | armv7l | 5.10.12-imx6 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.12-imx6 (root@beast) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #21.02.1 SMP Wed Feb 3 21:02:35 CET 2021 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Cubox-i Dual/Quad [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x80000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 19 pages/cpu s46860 r8192 d22772 u77824 [ 0.000000] pcpu-alloc: s46860 r8192 d22772 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: root=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 rootwait console=tty1 consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080m60,if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 1774628K/2097152K available (10495K kernel code, 2391K rwdata, 5348K rodata, 2048K init, 532K bss, 60380K reserved, 262144K cma-reserved, 1048576K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x324 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 47636 entries in 94 pages [ 0.000000] ftrace: allocated 94 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000030] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003884] Console: colour dummy device 80x30 [ 0.003951] printk: console [tty1] enabled [ 0.004057] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) [ 0.004079] pid_max: default: 32768 minimum: 301 [ 0.004467] LSM: Security Framework initializing [ 0.004584] Yama: becoming mindful. [ 0.004720] SELinux: Initializing. [ 0.004881] TOMOYO Linux initialized [ 0.005025] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005051] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006726] CPU: Testing write buffer coherency: ok [ 0.006778] CPU0: Spectre v2: using BPIALL workaround [ 0.007387] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.009135] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.011268] rcu: Hierarchical SRCU implementation. [ 0.014750] EFI services will not be available. [ 0.015596] smp: Bringing up secondary CPUs ... [ 0.016968] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016980] CPU1: Spectre v2: using BPIALL workaround [ 0.018676] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.018686] CPU2: Spectre v2: using BPIALL workaround [ 0.020300] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.020310] CPU3: Spectre v2: using BPIALL workaround [ 0.020496] smp: Brought up 1 node, 4 CPUs [ 0.020509] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.020517] CPU: All CPU(s) started in SVC mode. [ 0.022288] devtmpfs: initialized [ 0.036184] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.036638] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.036798] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052645] pinctrl core: initialized pinctrl subsystem [ 0.054815] DMI not present or invalid. [ 0.055795] NET: Registered protocol family 16 [ 0.070683] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.072080] audit: initializing netlink subsys (disabled) [ 0.072439] audit: type=2000 audit(0.070:1): state=initialized audit_enabled=0 res=1 [ 0.074160] thermal_sys: Registered thermal governor 'fair_share' [ 0.074173] thermal_sys: Registered thermal governor 'step_wise' [ 0.074183] thermal_sys: Registered thermal governor 'user_space' [ 0.074412] cpuidle: using governor menu [ 0.075101] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.496567] No ATAGs? [ 0.496813] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.496822] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.499565] debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present! [ 0.500039] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.502946] Serial: AMBA PL011 UART driver [ 0.523341] cryptd: max_cpu_qlen set to 1000 [ 0.534326] raid6: skip pq benchmark and using algorithm neonx8 [ 0.534340] raid6: using neon recovery algorithm [ 0.554667] vcc_3v3: supplied by v_5v0 [ 0.554764] v_usb2: supplied by v_5v0 [ 0.555538] v_usb1: supplied by v_5v0 [ 0.556889] iommu: Default domain type: Translated [ 0.558390] vgaarb: loaded [ 0.559598] SCSI subsystem initialized [ 0.559929] libata version 3.00 loaded. [ 0.560327] usbcore: registered new interface driver usbfs [ 0.560402] usbcore: registered new interface driver hub [ 0.560459] usbcore: registered new device driver usb [ 0.561204] pps_core: LinuxPPS API ver. 1 registered [ 0.561215] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.561244] PTP clock support registered [ 0.561601] EDAC MC: Ver: 3.0.0 [ 0.565107] NetLabel: Initializing [ 0.565117] NetLabel: domain hash size = 128 [ 0.565124] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.565237] NetLabel: unlabeled traffic allowed by default [ 0.566210] clocksource: Switched to clocksource mxc_timer1 [ 0.800658] VFS: Disk quotas dquot_6.6.0 [ 0.800804] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.818737] NET: Registered protocol family 2 [ 0.820237] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.820497] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.820712] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.820845] TCP: Hash tables configured (established 8192 bind 8192) [ 0.821261] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.821394] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.821736] NET: Registered protocol family 1 [ 0.821792] NET: Registered protocol family 44 [ 0.821810] PCI: CLS 0 bytes, default 64 [ 0.822689] Trying to unpack rootfs image as initramfs... [ 2.637966] Freeing initrd memory: 19320K [ 2.638921] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.639391] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.643097] Initialise system trusted keyrings [ 2.643179] Key type blacklist registered [ 2.643650] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.654263] zbud: loaded [ 2.658739] fuse: init (API version 7.32) [ 2.661815] integrity: Platform Keyring initialized [ 2.773872] xor: measuring software checksum speed [ 2.781887] arm4regs : 1246 MB/sec [ 2.792364] 8regs : 943 MB/sec [ 2.802256] 32regs : 997 MB/sec [ 2.812989] neon : 919 MB/sec [ 2.812998] xor: using function: arm4regs (1246 MB/sec) [ 2.813068] Key type asymmetric registered [ 2.813079] Asymmetric key parser 'x509' registered [ 2.813747] bounce: pool size: 64 pages [ 2.814048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.814412] io scheduler mq-deadline registered [ 2.814423] io scheduler kyber registered [ 2.814858] io scheduler bfq registered [ 2.843590] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.860102] Serial: AMBA driver [ 2.861298] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 2.863066] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 73, base_baud = 5000000) is a IMX [ 2.864954] msm_serial: driver initialized [ 2.864963] STMicroelectronics ASC driver initialized [ 2.866507] STM32 USART driver initialized [ 2.873034] libphy: Fixed MDIO Bus: probed [ 2.873409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.873439] ehci-pci: EHCI PCI platform driver [ 2.873515] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.873626] usbcore: registered new interface driver usb-storage [ 2.873777] usbcore: registered new interface driver usbserial_generic [ 2.873820] usbserial: USB Serial support registered for generic [ 2.874106] mousedev: PS/2 mouse device common for all mice [ 2.875390] i2c /dev entries driver [ 2.879339] device-mapper: uevent: version 1.0.3 [ 2.879824] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.882496] ledtrig-cpu: registered to indicate activity on CPUs [ 2.883697] hid: raw HID events driver (C) Jiri Kosina [ 2.883867] usbcore: registered new interface driver usbhid [ 2.883875] usbhid: USB HID core driver [ 2.886431] drop_monitor: Initializing network drop monitor service [ 2.886833] Initializing XFRM netlink socket [ 2.887665] NET: Registered protocol family 10 [ 2.955127] Segment Routing with IPv6 [ 2.955315] NET: Registered protocol family 17 [ 2.957037] ThumbEE CPU extension supported. [ 2.957057] Registering SWP/SWPB emulation handler [ 2.957660] registered taskstats version 1 [ 2.957741] Loading compiled-in X.509 certificates [ 2.966865] Loaded X.509 cert 'Build time autogenerated kernel key: f47c178852ca39740c3546b008122b65f5ed9bce' [ 2.986454] zswap: loaded using pool zstd/z3fold [ 2.988062] Key type ._fscrypt registered [ 2.988076] Key type .fscrypt registered [ 2.988083] Key type fscrypt-provisioning registered [ 3.004759] Btrfs loaded, crc32c=crc32c-generic [ 3.036477] Key type encrypted registered [ 3.036534] ima: No TPM chip found, activating TPM-bypass! [ 3.036581] ima: Allocated hash algorithm: sha256 [ 3.036640] ima: No architecture policies found [ 3.096201] Freeing unused kernel memory: 2048K [ 3.106047] ------------[ cut here ]------------ [ 3.106080] WARNING: CPU: 3 PID: 1 at arch/arm/mm/dump.c:249 note_page+0x158/0x324 [ 3.106094] arm/mm: Found insecure W+X mapping at address 0xf0a39000 [ 3.106101] Modules linked in: [ 3.106124] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.12-imx6 #21.02.1 [ 3.106132] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.106172] [] (unwind_backtrace) from [] (show_stack+0x18/0x1c) [ 3.106202] [] (show_stack) from [] (dump_stack+0xb8/0xd8) [ 3.106230] [] (dump_stack) from [] (__warn+0xc0/0xec) [ 3.106252] [] (__warn) from [] (warn_slowpath_fmt+0x70/0x90) [ 3.106270] [] (warn_slowpath_fmt) from [] (note_page+0x158/0x324) [ 3.106286] [] (note_page) from [] (walk_pgd+0xcc/0xe0) [ 3.106301] [] (walk_pgd) from [] (ptdump_check_wx+0x58/0xac) [ 3.106325] [] (ptdump_check_wx) from [] (kernel_init+0x38/0x150) [ 3.106347] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 3.106356] Exception stack(0xc1975fb0 to 0xc1975ff8) [ 3.106367] 5fa0: 00000000 00000000 00000000 00000000 [ 3.106379] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.106388] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.106439] ---[ end trace ff0038e749f80ec8 ]--- [ 3.106730] Checked W+X mappings: FAILED, 1 W+X pages found [ 3.106750] rodata_test: all tests were successful [ 3.106794] Run /init as init process [ 3.106804] with arguments: [ 3.106811] /init [ 3.106819] with environment: [ 3.106826] HOME=/ [ 3.106832] TERM=linux [ 3.107698] process '/usr/bin/sh' started with executable stack [ 3.130988] fbcon: Taking over console [ 3.560244] random: fast init done [ 3.847640] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.979964] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.980031] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-04-15T01:23:08 UTC (8990588) [ 4.021830] vdd1p1: supplied by regulator-dummy [ 4.023477] vdd3p0: supplied by regulator-dummy [ 4.024868] vdd2p5: supplied by regulator-dummy [ 4.026242] vddarm: supplied by regulator-dummy [ 4.027538] vddpu: supplied by regulator-dummy [ 4.029546] vddsoc: supplied by regulator-dummy [ 4.114314] i2c i2c-1: IMX I2C adapter registered [ 4.126371] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 4.126855] i2c i2c-2: IMX I2C adapter registered [ 4.126906] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 4.150301] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 [ 4.150318] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 [ 4.150330] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 [ 4.150341] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.150459] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.150777] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.150897] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.158641] sdhci: Secure Digital Host Controller Interface driver [ 4.158656] sdhci: Copyright(c) Pierre Ossman [ 4.163575] pps pps0: new PPS source ptp0 [ 4.167079] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.167144] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.167181] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.178086] libphy: fec_enet_mii_bus: probed [ 4.199435] scsi host0: ahci-imx [ 4.200519] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 76 [ 4.205433] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.216718] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.219587] sdhci-esdhc-imx 2190000.mmc: allocated mmc-pwrseq [ 4.223406] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 4.251154] imx_usb 2184000.usb: No over current polarity defined [ 4.257424] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.258056] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.259868] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.269559] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.270259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.270280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.270298] usb usb1: Product: EHCI Host Controller [ 4.270317] usb usb1: Manufacturer: Linux 5.10.12-imx6 ehci_hcd [ 4.270330] usb usb1: SerialNumber: ci_hdrc.0 [ 4.271920] hub 1-0:1.0: USB hub found [ 4.272037] hub 1-0:1.0: 1 port detected [ 4.279733] imx_usb 2184200.usb: No over current polarity defined [ 4.285629] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.286100] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 4.293288] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.293796] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.293813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.293822] usb usb2: Product: EHCI Host Controller [ 4.293831] usb usb2: Manufacturer: Linux 5.10.12-imx6 ehci_hcd [ 4.293839] usb usb2: SerialNumber: ci_hdrc.1 [ 4.294964] hub 2-0:1.0: USB hub found [ 4.295058] hub 2-0:1.0: 1 port detected [ 4.315392] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.317876] mmc1: new high speed SDHC card at address 59b4 [ 4.379930] rtc-pcf8523 2-0068: registered as rtc1 [ 4.412571] mmcblk1: mmc1:59b4 EB2MW 29.8 GiB [ 4.424533] mmcblk1: p1 [ 4.472138] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.490066] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.491910] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.493747] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.497097] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.500444] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.554717] mmc0: new high speed SDIO card at address 0001 [ 13.041270] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.041714] ata1.15: Port Multiplier 1.2, 0x197b:0x0562 r0, 2 ports, feat 0x5/0xf [ 13.047976] ata1.00: hard resetting link [ 13.481320] ata1.00: link resume succeeded after 1 retries [ 13.745679] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 13.745745] ata1.01: hard resetting link [ 14.785341] ata1.01: failed to resume link (SControl 0) [ 14.785835] ata1.01: SATA link down (SStatus 0 SControl 0) [ 14.786458] ata1.00: ATA-9: WDC WD121KRYZ-01W0RB0, 01.01H01, max UDMA/133 [ 14.786470] ata1.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 32) [ 14.790246] ata1.00: configured for UDMA/133 [ 14.790382] ata1: EH complete [ 14.791115] scsi 0:0:0:0: Direct-Access ATA WDC WD121KRYZ-01 1H01 PQ: 0 ANSI: 5 [ 14.792820] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.793375] sd 0:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 14.793392] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 14.793503] sd 0:0:0:0: [sda] Write Protect is off [ 14.793521] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.793703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.852795] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 14.857585] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.544957] md0: WARNING: sda3 appears to be on the same physical disk as sda5. [ 15.544974] True protection against single-disk failure might be compromised. [ 15.545800] md/raid1:md0: active with 2 out of 2 mirrors [ 15.545944] md0: detected capacity change from 0 to 21458059264 [ 15.918104] async_tx: api initialized (async) [ 16.306149] random: crng init done [ 16.450512] BTRFS: device fsid 6ada4766-740b-4df6-9f0b-e6ed894ece69 devid 1 transid 35010 /dev/sda6 scanned by btrfs (222) [ 16.749668] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 17.203039] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 17.911742] systemd[1]: System time before build time, advancing clock. [ 18.010862] systemd[1]: Inserted module 'autofs4' [ 18.140422] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 18.141382] systemd[1]: Detected architecture arm. [ 18.165501] systemd[1]: Set hostname to . [ 19.012505] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly. [ 19.054641] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly. [ 19.080441] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly. [ 19.139313] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid \xe2\x86\x92 /run/fail2ban/fail2ban.pid; please update the unit file accordingly. [ 19.322355] systemd[1]: Listening on udev Kernel Socket. [ 19.323980] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 19.324868] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 19.597575] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 19.716703] RPC: Registered named UNIX socket transport module. [ 19.716736] RPC: Registered udp transport module. [ 19.716746] RPC: Registered tcp transport module. [ 19.716754] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.991332] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.072554] Registered IR keymap rc-empty [ 21.072704] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 21.095875] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 21.096132] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input1 [ 21.186100] imx-ipuv3 2400000.ipu: IPUv3H probed [ 21.192856] imx-ipuv3 2800000.ipu: IPUv3H probed [ 21.353750] rc rc0: two consecutive events of type space [ 21.389609] mc: Linux media interface: v0.10 [ 21.423912] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 21.426093] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 21.427526] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 21.427561] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 21.429752] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 21.435453] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 21.435471] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 21.436482] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 21.518340] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 21.518569] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 21.518772] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 21.519001] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 21.519463] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 21.523675] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 21.528131] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 21.528646] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 21.542712] videodev: Linux video capture interface: v2.00 [ 21.823026] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 21.857476] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 22.030629] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 22.030658] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 22.091391] caam 2100000.crypto: Entropy delay = 3200 [ 22.111399] fsl-spdif-dai 2004000.spdif: Missing dma channel for stream: 0 [ 22.111415] fsl-spdif-dai 2004000.spdif: ASoC: error at snd_soc_pcm_component_new on 2004000.spdif: -22 [ 22.111428] S!PDIF PCM: ASoC: pcm S/PDIF PCM snd-soc-dummy-dai-0 constructor failed for dailink S/PDIF PCM: -22 [ 22.111437] imx-spdif sound-spdif: ASoC: can't create pcm S/PDIF PCM :-22 [ 22.111739] imx-spdif sound-spdif: snd_soc_register_card failed: -22 [ 22.111771] imx-spdif: probe of sound-spdif failed with error -22 [ 22.152226] caam 2100000.crypto: Instantiated RNG4 SH0 [ 22.212964] caam 2100000.crypto: Instantiated RNG4 SH1 [ 22.213091] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 22.213106] caam 2100000.crypto: job rings = 2, qi = 0 [ 22.582361] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 22.726774] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.752701] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.752991] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 22.753014] cfg80211: failed to load regulatory.db [ 22.877526] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 22.877833] usbcore: registered new interface driver brcmfmac [ 22.878037] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.bin failed with error -2 [ 23.010029] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.016781] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.017290] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 23.017310] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.018520] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 23.020840] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 23.021784] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 23.022517] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 23.022966] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 23.025142] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 23.025944] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 23.273869] systemd[1]: Found device /dev/md0. [ 23.404796] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 2. [ 23.556924] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 4. [ 23.656617] caam algorithms registered in /proc/crypto [ 23.659381] caam 2100000.crypto: registering rng-caam [ 23.881245] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 23.984229] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 6. [ 24.088433] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 24.088845] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 24.089549] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 24.099133] systemd[1]: Starting Load Kernel Modules... [ 24.099879] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 24.100683] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 24.134663] BTRFS info (device sda6): disk space caching is enabled [ 24.134678] BTRFS info (device sda6): has skinny extents [ 24.227188] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 24.246685] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 24.275294] Adding 5242876k swap on /dev/sda2. Priority:-2 extents:1 across:5242876k FS [ 24.796145] zram: Added device: zram0 [ 24.798504] zram: Added device: zram1 [ 24.800119] zram: Added device: zram2 [ 24.976289] zram0: detected capacity change from 0 to 1053769728 [ 25.055313] Adding 1029068k swap on /dev/zram0. Priority:5 extents:1 across:1029068k SSFS [ 25.311068] zram1: detected capacity change from 0 to 52428800 [ 25.602539] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 25.602606] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 30.806322] systemd[1]: Started Armbian memory supported logging. [ 30.821701] systemd[1]: Starting Journal Service... [ 31.105046] systemd[1]: Started Journal Service. [ 31.194963] systemd-journald[651]: Received request to flush runtime journal from PID 1 ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=cubox-i BOARD_NAME="Cubox i2eX/i4" BOARDFAMILY=imx6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=5f03d652 DISTRIBUTION_CODENAME=buster DISTRIBUTION_STATUS=supported VERSION=21.02.1 LINUXFAMILY=imx6 BRANCH=current ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image ### boot environment: verbosity=1 rootdev=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: ARM Model: 10 Model name: Cortex-A9 Stepping: r2p10 CPU max MHz: 996.0000 CPU min MHz: 396.0000 BogoMIPS: 7.54 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 1 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 2 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 3 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) Revision : 0000 Serial : 0000000000000000 ### meminfo: MemTotal: 2058140 kB MemFree: 1899516 kB MemAvailable: 1960828 kB Buffers: 14600 kB Cached: 60396 kB SwapCached: 0 kB Active: 44172 kB Inactive: 38236 kB Active(anon): 204 kB Inactive(anon): 10272 kB Active(file): 43968 kB Inactive(file): 27964 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1310720 kB HighFree: 1229956 kB LowTotal: 747420 kB LowFree: 669560 kB SwapTotal: 6271944 kB SwapFree: 6271944 kB Dirty: 11748 kB Writeback: 0 kB AnonPages: 7364 kB Mapped: 9640 kB Shmem: 3044 kB KReclaimable: 16068 kB Slab: 40360 kB SReclaimable: 16068 kB SUnreclaim: 24292 kB KernelStack: 1176 kB PageTables: 392 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 7301012 kB Committed_AS: 14504 kB VmallocTotal: 245760 kB VmallocUsed: 21504 kB VmallocChunk: 0 kB Percpu: 768 kB CmaTotal: 262144 kB CmaFree: 259144 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.compaction_proactiveness = 20 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirty_writeback_centisecs = 500 vm.dirtytime_expire_seconds = 43200 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3408 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.unprivileged_userfaultfd = 1 vm.user_reserve_kbytes = 63438 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 ### ip addr: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d0:63:b4:00:7e:35 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31276032 mmcblk1 179 1 30959168 mmcblk1p1 8 0 11718885376 sda 8 1 33554432 sda1 8 2 5242880 sda2 8 3 20971520 sda3 8 4 209715200 sda4 8 5 20971520 sda5 8 6 11428428783 sda6 9 0 20955136 md0 252 0 1029072 zram0 252 1 51200 zram1 ### df: udev 867M 0 867M 0% /dev tmpfs 201M 3.0M 199M 2% /run /dev/mmcblk1p1 30G 2.9G 26G 11% / tmpfs 1005M 0 1005M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1005M 0 1005M 0% /sys/fs/cgroup /dev/md0 20G 62M 19G 1% /data/mirror /dev/sda4 196G 17G 170G 9% /data/primary tmpfs 1005M 0 1005M 0% /tmp /dev/zram1 49M 12M 34M 26% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID sda 10.9T |-sda1 32G |-sda3 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e |-sda4 ext4 200G /data/primary 0e436726-8bd4-49f6-8003-c88e937cd3dd |-sda5 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e `-sda6 btrfs 10.7T 6ada4766-740b-4df6-9f0b-e6ed894ece69 mmcblk1 29.8G `-mmcblk1p1 ext4 29.5G / 62458379-a0d4-4fd6-a56b-e7211fa6aab0 zram1 50M /var/log ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 132K 694B 52K 4 /var/log /dev/zram0 lzo-rle 1005M 4K 74B 4K 4 [SWAP] ### mtab: /dev/md0 /data/mirror ext4 rw,noatime,nodiratime 0 0 /dev/mmcblk1p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/sda4 /data/primary ext4 rw,noatime,nodiratime 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc1:59b4 info: manfid: 0x00001b cid: 1b534d4542324d5730140f6145011200 fwrev: 0x0 rca: 0x59b4 csd: 400e00325b590000ee9d7f800a400000 ocr: 0x00200000 type: SD date: 02/2017 hwrev: 0x3 dsr: 0x404 serial: 0x140f6145 erase_size: 512 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=EB2MW MODALIAS=mmc:block ssr: 00000000050000000400900008111900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 0235800300000000 oemid: 0x534d preferred_erase_size: 4194304 name: EB2MW ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 17:17:29: 996MHz 2.45 45% 22% 10% 0% 10% 2% 50.1°C 0/6 17:17:30: 792MHz 2.45 80% 33% 16% 1% 23% 5% 49.5°C 0/6 17:17:31: 996MHz 2.45 99% 53% 36% 1% 0% 7% 51.8°C 0/6 17:17:31: 996MHz 2.45 99% 48% 37% 0% 4% 8% 51.8°C 0/6 17:17:32: 996MHz 3.30 99% 52% 34% 1% 3% 7% 52.4°C 0/6 ### Activated 1 lzo-rle zram swap devices with 1004 MB each ### Activated Armbian ramlog partition with zstd compression Sat Feb 6 19:24:36 GMT 2021 | Cubox i2eX/i4 | 21.02.1 | armhf | armv7l | 5.10.12-imx6 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.12-imx6 (root@beast) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #21.02.1 SMP Wed Feb 3 21:02:35 CET 2021 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Cubox-i Dual/Quad [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x80000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 19 pages/cpu s46860 r8192 d22772 u77824 [ 0.000000] pcpu-alloc: s46860 r8192 d22772 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: root=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 rootwait console=tty1 consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080m60,if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 1774628K/2097152K available (10495K kernel code, 2391K rwdata, 5348K rodata, 2048K init, 532K bss, 60380K reserved, 262144K cma-reserved, 1048576K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x324 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 47636 entries in 94 pages [ 0.000000] ftrace: allocated 94 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000028] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003749] Console: colour dummy device 80x30 [ 0.003816] printk: console [tty1] enabled [ 0.003905] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) [ 0.003927] pid_max: default: 32768 minimum: 301 [ 0.004343] LSM: Security Framework initializing [ 0.004461] Yama: becoming mindful. [ 0.004597] SELinux: Initializing. [ 0.004761] TOMOYO Linux initialized [ 0.004880] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004908] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006587] CPU: Testing write buffer coherency: ok [ 0.006637] CPU0: Spectre v2: using BPIALL workaround [ 0.007251] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008999] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.011141] rcu: Hierarchical SRCU implementation. [ 0.014647] EFI services will not be available. [ 0.015494] smp: Bringing up secondary CPUs ... [ 0.016873] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016885] CPU1: Spectre v2: using BPIALL workaround [ 0.018633] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.018644] CPU2: Spectre v2: using BPIALL workaround [ 0.020273] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.020285] CPU3: Spectre v2: using BPIALL workaround [ 0.020472] smp: Brought up 1 node, 4 CPUs [ 0.020484] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.020495] CPU: All CPU(s) started in SVC mode. [ 0.022259] devtmpfs: initialized [ 0.036136] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.036595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.036754] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052591] pinctrl core: initialized pinctrl subsystem [ 0.054765] DMI not present or invalid. [ 0.055735] NET: Registered protocol family 16 [ 0.070618] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.072007] audit: initializing netlink subsys (disabled) [ 0.072362] audit: type=2000 audit(0.070:1): state=initialized audit_enabled=0 res=1 [ 0.074105] thermal_sys: Registered thermal governor 'fair_share' [ 0.074116] thermal_sys: Registered thermal governor 'step_wise' [ 0.074125] thermal_sys: Registered thermal governor 'user_space' [ 0.074358] cpuidle: using governor menu [ 0.075046] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.496767] No ATAGs? [ 0.497042] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.497052] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.499766] debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present! [ 0.500242] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.503199] Serial: AMBA PL011 UART driver [ 0.523471] cryptd: max_cpu_qlen set to 1000 [ 0.534469] raid6: skip pq benchmark and using algorithm neonx8 [ 0.534484] raid6: using neon recovery algorithm [ 0.554780] vcc_3v3: supplied by v_5v0 [ 0.554876] v_usb2: supplied by v_5v0 [ 0.555736] v_usb1: supplied by v_5v0 [ 0.557072] iommu: Default domain type: Translated [ 0.558625] vgaarb: loaded [ 0.560058] SCSI subsystem initialized [ 0.560554] libata version 3.00 loaded. [ 0.560934] usbcore: registered new interface driver usbfs [ 0.561006] usbcore: registered new interface driver hub [ 0.561066] usbcore: registered new device driver usb [ 0.561793] pps_core: LinuxPPS API ver. 1 registered [ 0.561804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.561833] PTP clock support registered [ 0.562190] EDAC MC: Ver: 3.0.0 [ 0.565790] NetLabel: Initializing [ 0.565800] NetLabel: domain hash size = 128 [ 0.565807] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.565945] NetLabel: unlabeled traffic allowed by default [ 0.566812] clocksource: Switched to clocksource mxc_timer1 [ 0.800789] VFS: Disk quotas dquot_6.6.0 [ 0.800978] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.818864] NET: Registered protocol family 2 [ 0.820413] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.820701] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.820968] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.821102] TCP: Hash tables configured (established 8192 bind 8192) [ 0.821503] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.821589] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.821981] NET: Registered protocol family 1 [ 0.822021] NET: Registered protocol family 44 [ 0.822040] PCI: CLS 0 bytes, default 64 [ 0.822962] Trying to unpack rootfs image as initramfs... [ 2.638750] Freeing initrd memory: 19320K [ 2.639734] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.640197] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.644040] Initialise system trusted keyrings [ 2.644117] Key type blacklist registered [ 2.644481] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.655012] zbud: loaded [ 2.659362] fuse: init (API version 7.32) [ 2.662447] integrity: Platform Keyring initialized [ 2.777835] xor: measuring software checksum speed [ 2.785821] arm4regs : 1237 MB/sec [ 2.796287] 8regs : 941 MB/sec [ 2.806189] 32regs : 997 MB/sec [ 2.816927] neon : 916 MB/sec [ 2.816936] xor: using function: arm4regs (1237 MB/sec) [ 2.816957] Key type asymmetric registered [ 2.816967] Asymmetric key parser 'x509' registered [ 2.817578] bounce: pool size: 64 pages [ 2.817748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.818070] io scheduler mq-deadline registered [ 2.818080] io scheduler kyber registered [ 2.818493] io scheduler bfq registered [ 2.847217] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.863862] Serial: AMBA driver [ 2.864978] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 2.866690] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 73, base_baud = 5000000) is a IMX [ 2.868664] msm_serial: driver initialized [ 2.868673] STMicroelectronics ASC driver initialized [ 2.870225] STM32 USART driver initialized [ 2.876676] libphy: Fixed MDIO Bus: probed [ 2.877063] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.877091] ehci-pci: EHCI PCI platform driver [ 2.877169] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.877284] usbcore: registered new interface driver usb-storage [ 2.877411] usbcore: registered new interface driver usbserial_generic [ 2.877453] usbserial: USB Serial support registered for generic [ 2.877736] mousedev: PS/2 mouse device common for all mice [ 2.879042] i2c /dev entries driver [ 2.882911] device-mapper: uevent: version 1.0.3 [ 2.883366] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.886048] ledtrig-cpu: registered to indicate activity on CPUs [ 2.887238] hid: raw HID events driver (C) Jiri Kosina [ 2.887450] usbcore: registered new interface driver usbhid [ 2.887458] usbhid: USB HID core driver [ 2.890005] drop_monitor: Initializing network drop monitor service [ 2.890383] Initializing XFRM netlink socket [ 2.891207] NET: Registered protocol family 10 [ 2.958289] Segment Routing with IPv6 [ 2.958484] NET: Registered protocol family 17 [ 2.960363] ThumbEE CPU extension supported. [ 2.960385] Registering SWP/SWPB emulation handler [ 2.961005] registered taskstats version 1 [ 2.961089] Loading compiled-in X.509 certificates [ 2.970260] Loaded X.509 cert 'Build time autogenerated kernel key: f47c178852ca39740c3546b008122b65f5ed9bce' [ 2.989934] zswap: loaded using pool zstd/z3fold [ 2.991554] Key type ._fscrypt registered [ 2.991566] Key type .fscrypt registered [ 2.991574] Key type fscrypt-provisioning registered [ 3.008211] Btrfs loaded, crc32c=crc32c-generic [ 3.040275] Key type encrypted registered [ 3.040332] ima: No TPM chip found, activating TPM-bypass! [ 3.040369] ima: Allocated hash algorithm: sha256 [ 3.040429] ima: No architecture policies found [ 3.100040] Freeing unused kernel memory: 2048K [ 3.106682] ------------[ cut here ]------------ [ 3.106716] WARNING: CPU: 0 PID: 1 at arch/arm/mm/dump.c:249 note_page+0x158/0x324 [ 3.106730] arm/mm: Found insecure W+X mapping at address 0xf0a39000 [ 3.106736] Modules linked in: [ 3.106759] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.12-imx6 #21.02.1 [ 3.106766] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.106806] [] (unwind_backtrace) from [] (show_stack+0x18/0x1c) [ 3.106836] [] (show_stack) from [] (dump_stack+0xb8/0xd8) [ 3.106865] [] (dump_stack) from [] (__warn+0xc0/0xec) [ 3.106887] [] (__warn) from [] (warn_slowpath_fmt+0x70/0x90) [ 3.106904] [] (warn_slowpath_fmt) from [] (note_page+0x158/0x324) [ 3.106920] [] (note_page) from [] (walk_pgd+0xcc/0xe0) [ 3.106935] [] (walk_pgd) from [] (ptdump_check_wx+0x58/0xac) [ 3.106958] [] (ptdump_check_wx) from [] (kernel_init+0x38/0x150) [ 3.106981] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 3.106990] Exception stack(0xc1975fb0 to 0xc1975ff8) [ 3.107002] 5fa0: 00000000 00000000 00000000 00000000 [ 3.107014] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.107023] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.107075] ---[ end trace 5c5c8f2c8747317c ]--- [ 3.107366] Checked W+X mappings: FAILED, 1 W+X pages found [ 3.107386] rodata_test: all tests were successful [ 3.107430] Run /init as init process [ 3.107441] with arguments: [ 3.107449] /init [ 3.107456] with environment: [ 3.107463] HOME=/ [ 3.107469] TERM=linux [ 3.108177] process '/usr/bin/sh' started with executable stack [ 3.131377] fbcon: Taking over console [ 3.663824] random: fast init done [ 3.869727] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.011980] vdd1p1: supplied by regulator-dummy [ 4.013586] vdd3p0: supplied by regulator-dummy [ 4.015348] vdd2p5: supplied by regulator-dummy [ 4.016094] vddarm: supplied by regulator-dummy [ 4.016202] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 4.016259] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-04-16T03:30:22 UTC (9084622) [ 4.017643] vddpu: supplied by regulator-dummy [ 4.019695] vddsoc: supplied by regulator-dummy [ 4.118205] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 4.127241] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 4.175426] pps pps0: new PPS source ptp0 [ 4.187922] sdhci: Secure Digital Host Controller Interface driver [ 4.187932] sdhci: Copyright(c) Pierre Ossman [ 4.194984] libphy: fec_enet_mii_bus: probed [ 4.215430] i2c i2c-1: IMX I2C adapter registered [ 4.226035] i2c i2c-2: IMX I2C adapter registered [ 4.239201] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.247873] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.250786] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 [ 4.250841] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 [ 4.250854] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 [ 4.250865] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.250959] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.251276] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.251421] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.270733] sdhci-esdhc-imx 2190000.mmc: allocated mmc-pwrseq [ 4.275999] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.276064] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.276103] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.283343] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 4.308500] scsi host0: ahci-imx [ 4.309352] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 76 [ 4.323088] imx_usb 2184000.usb: No over current polarity defined [ 4.328978] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.329482] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.337006] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.337502] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.339314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.339337] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.339355] usb usb1: Product: EHCI Host Controller [ 4.339370] usb usb1: Manufacturer: Linux 5.10.12-imx6 ehci_hcd [ 4.339382] usb usb1: SerialNumber: ci_hdrc.0 [ 4.342122] hub 1-0:1.0: USB hub found [ 4.342246] hub 1-0:1.0: 1 port detected [ 4.346035] imx_usb 2184200.usb: No over current polarity defined [ 4.350981] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.352042] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 4.360899] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.361414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.361430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.361439] usb usb2: Product: EHCI Host Controller [ 4.361447] usb usb2: Manufacturer: Linux 5.10.12-imx6 ehci_hcd [ 4.361455] usb usb2: SerialNumber: ci_hdrc.1 [ 4.362514] hub 2-0:1.0: USB hub found [ 4.362624] hub 2-0:1.0: 1 port detected [ 4.373533] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.376161] mmc1: new high speed SDHC card at address 59b4 [ 4.405701] rtc-pcf8523 2-0068: registered as rtc1 [ 4.544720] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.562265] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.564097] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.565948] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.569223] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.572495] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.626445] mmc0: new high speed SDIO card at address 0001 [ 13.333873] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.334318] ata1.15: Port Multiplier 1.2, 0x197b:0x0562 r0, 2 ports, feat 0x5/0xf [ 13.340457] ata1.00: hard resetting link [ 13.777929] ata1.00: link resume succeeded after 1 retries [ 14.042255] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.042322] ata1.01: hard resetting link [ 15.081920] ata1.01: failed to resume link (SControl 0) [ 15.082381] ata1.01: SATA link down (SStatus 0 SControl 0) [ 15.083001] ata1.00: ATA-9: WDC WD121KRYZ-01W0RB0, 01.01H01, max UDMA/133 [ 15.083015] ata1.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 32) [ 15.087019] ata1.00: configured for UDMA/133 [ 15.087154] ata1: EH complete [ 15.087957] scsi 0:0:0:0: Direct-Access ATA WDC WD121KRYZ-01 1H01 PQ: 0 ANSI: 5 [ 15.089539] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.089990] sd 0:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 15.090006] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 15.090134] sd 0:0:0:0: [sda] Write Protect is off [ 15.090148] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.090337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.150525] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 15.155122] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.180574] mmcblk1: mmc1:59b4 EB2MW 29.8 GiB [ 15.193279] mmcblk1: p1 [ 16.165924] md0: WARNING: sda5 appears to be on the same physical disk as sda3. [ 16.165937] True protection against single-disk failure might be compromised. [ 16.166392] md/raid1:md0: active with 2 out of 2 mirrors [ 16.166520] md0: detected capacity change from 0 to 21458059264 [ 16.746186] random: crng init done [ 16.940164] async_tx: api initialized (async) [ 17.497787] BTRFS: device fsid 6ada4766-740b-4df6-9f0b-e6ed894ece69 devid 1 transid 35264 /dev/sda6 scanned by btrfs (220) [ 17.795375] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 18.248177] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 18.942484] systemd[1]: System time before build time, advancing clock. [ 19.050248] systemd[1]: Inserted module 'autofs4' [ 19.178400] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.179379] systemd[1]: Detected architecture arm. [ 19.205225] systemd[1]: Set hostname to . [ 20.073121] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly. [ 20.115063] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly. [ 20.140636] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly. [ 20.200473] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid \xe2\x86\x92 /run/fail2ban/fail2ban.pid; please update the unit file accordingly. [ 20.384570] systemd[1]: Reached target System Time Synchronized. [ 20.394572] systemd[1]: Created slice system-getty.slice. [ 20.395546] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 20.748557] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 20.752459] RPC: Registered named UNIX socket transport module. [ 20.752492] RPC: Registered udp transport module. [ 20.752501] RPC: Registered tcp transport module. [ 20.752509] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.062258] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.237512] imx-ipuv3 2400000.ipu: IPUv3H probed [ 22.244392] imx-ipuv3 2800000.ipu: IPUv3H probed [ 22.249014] Registered IR keymap rc-empty [ 22.249176] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 22.250053] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 22.250449] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input1 [ 22.291655] mc: Linux media interface: v0.10 [ 22.385459] videodev: Linux video capture interface: v2.00 [ 22.391117] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 22.391303] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 22.391542] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 22.391710] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 22.392181] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 22.393744] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 22.401644] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 22.407682] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 22.575896] rc rc0: two consecutive events of type space [ 22.606234] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 22.616775] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 22.626113] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 22.626140] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 22.627438] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 22.627562] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 22.627577] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 22.628704] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 22.682606] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 22.730730] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 22.930613] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 22.930640] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 23.263007] caam 2100000.crypto: Entropy delay = 3200 [ 23.323818] caam 2100000.crypto: Instantiated RNG4 SH0 [ 23.384571] caam 2100000.crypto: Instantiated RNG4 SH1 [ 23.395349] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 23.398168] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 23.398199] caam 2100000.crypto: job rings = 2, qi = 0 [ 23.724331] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.752204] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.752401] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 23.752417] cfg80211: failed to load regulatory.db [ 23.789298] fsl-spdif-dai 2004000.spdif: Missing dma channel for stream: 0 [ 23.789318] fsl-spdif-dai 2004000.spdif: ASoC: error at snd_soc_pcm_component_new on 2004000.spdif: -22 [ 23.789327] S!PDIF PCM: ASoC: pcm S/PDIF PCM snd-soc-dummy-dai-0 constructor failed for dailink S/PDIF PCM: -22 [ 23.789335] imx-spdif sound-spdif: ASoC: can't create pcm S/PDIF PCM :-22 [ 23.789636] imx-spdif sound-spdif: snd_soc_register_card failed: -22 [ 23.789676] imx-spdif: probe of sound-spdif failed with error -22 [ 23.904195] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 23.904499] usbcore: registered new interface driver brcmfmac [ 23.905007] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.bin failed with error -2 [ 24.154119] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.173461] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.173550] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.185122] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 24.187987] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 24.193258] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 24.196720] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 24.200126] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 24.204565] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 24.205984] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 24.210078] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 24.231897] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.291932] systemd[1]: Found device /dev/md0. [ 24.305410] systemd[1]: Started MD array monitor. [ 24.323610] systemd[1]: Mounting /data/mirror... [ 24.418202] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 24.476604] systemd[1]: Mounted /data/mirror. [ 24.778041] caam algorithms registered in /proc/crypto [ 24.780577] caam 2100000.crypto: registering rng-caam [ 24.871472] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 4. [ 24.913553] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 24.978781] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 2. [ 25.084010] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 6. [ 25.189876] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 25.190412] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 25.190498] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 25.246909] BTRFS info (device sda6): disk space caching is enabled [ 25.246923] BTRFS info (device sda6): has skinny extents [ 25.327884] Adding 5242876k swap on /dev/sda2. Priority:-2 extents:1 across:5242876k FS [ 25.352369] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 25.841337] zram: Added device: zram0 [ 25.844002] zram: Added device: zram1 [ 25.847617] zram: Added device: zram2 [ 26.013260] zram0: detected capacity change from 0 to 1053769728 [ 26.085966] Adding 1029068k swap on /dev/zram0. Priority:5 extents:1 across:1029068k SSFS [ 26.351350] zram1: detected capacity change from 0 to 52428800 [ 26.642635] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 26.642696] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 31.956243] systemd[1]: Started Armbian memory supported logging. [ 31.970411] systemd[1]: Starting Journal Service... [ 32.251161] systemd[1]: Started Journal Service. [ 32.350368] systemd-journald[655]: Received request to flush runtime journal from PID 1 ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=cubox-i BOARD_NAME="Cubox i2eX/i4" BOARDFAMILY=imx6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=5f03d652 DISTRIBUTION_CODENAME=buster DISTRIBUTION_STATUS=supported VERSION=21.02.1 LINUXFAMILY=imx6 BRANCH=current ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image ### boot environment: verbosity=1 rootdev=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: ARM Model: 10 Model name: Cortex-A9 Stepping: r2p10 CPU max MHz: 996.0000 CPU min MHz: 396.0000 BogoMIPS: 7.54 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 1 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 2 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 3 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) Revision : 0000 Serial : 0000000000000000 ### meminfo: MemTotal: 2058140 kB MemFree: 1897052 kB MemAvailable: 1960296 kB Buffers: 14600 kB Cached: 62304 kB SwapCached: 0 kB Active: 46092 kB Inactive: 38132 kB Active(anon): 204 kB Inactive(anon): 10148 kB Active(file): 45888 kB Inactive(file): 27984 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1310720 kB HighFree: 1228792 kB LowTotal: 747420 kB LowFree: 668260 kB SwapTotal: 6271944 kB SwapFree: 6271944 kB Dirty: 12612 kB Writeback: 0 kB AnonPages: 7336 kB Mapped: 9484 kB Shmem: 3044 kB KReclaimable: 16060 kB Slab: 41044 kB SReclaimable: 16060 kB SUnreclaim: 24984 kB KernelStack: 1240 kB PageTables: 412 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 7301012 kB Committed_AS: 14456 kB VmallocTotal: 245760 kB VmallocUsed: 21504 kB VmallocChunk: 0 kB Percpu: 768 kB CmaTotal: 262144 kB CmaFree: 259144 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.compaction_proactiveness = 20 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirty_writeback_centisecs = 500 vm.dirtytime_expire_seconds = 43200 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3408 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.unprivileged_userfaultfd = 1 vm.user_reserve_kbytes = 63438 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 ### ip addr: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d0:63:b4:00:7e:35 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 8 0 11718885376 sda 8 1 33554432 sda1 8 2 5242880 sda2 8 3 20971520 sda3 8 4 209715200 sda4 8 5 20971520 sda5 8 6 11428428783 sda6 179 0 31276032 mmcblk1 179 1 30959168 mmcblk1p1 9 0 20955136 md0 252 0 1029072 zram0 252 1 51200 zram1 ### df: udev 867M 0 867M 0% /dev tmpfs 201M 3.0M 199M 2% /run /dev/mmcblk1p1 30G 2.9G 26G 11% / tmpfs 1005M 0 1005M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1005M 0 1005M 0% /sys/fs/cgroup /dev/md0 20G 63M 19G 1% /data/mirror /dev/sda4 196G 18G 169G 10% /data/primary tmpfs 1005M 0 1005M 0% /tmp /dev/zram1 49M 13M 33M 28% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID sda 10.9T |-sda1 32G |-sda3 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e |-sda4 ext4 200G /data/primary 0e436726-8bd4-49f6-8003-c88e937cd3dd |-sda5 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e `-sda6 btrfs 10.7T 6ada4766-740b-4df6-9f0b-e6ed894ece69 mmcblk1 29.8G `-mmcblk1p1 ext4 29.5G / 62458379-a0d4-4fd6-a56b-e7211fa6aab0 zram1 50M /var/log ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 132K 694B 52K 4 /var/log /dev/zram0 lzo-rle 1005M 4K 74B 4K 4 [SWAP] ### mtab: /dev/md0 /data/mirror ext4 rw,noatime,nodiratime 0 0 /dev/mmcblk1p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/sda4 /data/primary ext4 rw,noatime,nodiratime 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc1:59b4 info: manfid: 0x00001b cid: 1b534d4542324d5730140f6145011200 fwrev: 0x0 rca: 0x59b4 csd: 400e00325b590000ee9d7f800a400000 ocr: 0x00200000 type: SD date: 02/2017 hwrev: 0x3 dsr: 0x404 serial: 0x140f6145 erase_size: 512 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=EB2MW MODALIAS=mmc:block ssr: 00000000050000000400900008111900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 0235800300000000 oemid: 0x534d preferred_erase_size: 4194304 name: EB2MW ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 19:24:40: 996MHz 1.38 43% 22% 10% 0% 7% 2% 65.9°C 0/6 19:24:40: 996MHz 1.38 91% 55% 14% 1% 14% 6% 65.4°C 0/6 19:24:41: 996MHz 1.38 98% 63% 24% 0% 2% 7% 66.5°C 0/6 19:24:42: 996MHz 1.38 99% 51% 37% 0% 1% 8% 66.5°C 0/6 19:24:43: 996MHz 1.38 99% 52% 35% 1% 2% 7% 66.5°C 0/6 ### Activated 1 lzo-rle zram swap devices with 1005 MB each ### Activated Armbian ramlog partition with zstd compression Sat Feb 6 21:09:25 GMT 2021 | Cubox i2eX/i4 | 21.02.1 | armhf | armv7l | 5.9.14-imx6 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.9.14-imx6 (root@beast) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #20.11.3 SMP Fri Dec 11 20:57:51 CET 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Cubox-i Dual/Quad [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x80000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 19 pages/cpu s47116 r8192 d22516 u77824 [ 0.000000] pcpu-alloc: s47116 r8192 d22516 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: root=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 rootwait console=tty1 consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080m60,if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 1775720K/2097152K available (10292K kernel code, 1550K rwdata, 5340K rodata, 2048K init, 535K bss, 59288K reserved, 262144K cma-reserved, 1048576K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x324 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 46303 entries in 91 pages [ 0.000000] ftrace: allocated 91 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003622] Console: colour dummy device 80x30 [ 0.003642] printk: console [tty1] enabled [ 0.003728] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) [ 0.003743] pid_max: default: 32768 minimum: 301 [ 0.004158] LSM: Security Framework initializing [ 0.004273] Yama: becoming mindful. [ 0.004384] SELinux: Initializing. [ 0.004540] TOMOYO Linux initialized [ 0.004656] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004678] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006395] CPU: Testing write buffer coherency: ok [ 0.006439] CPU0: Spectre v2: using BPIALL workaround [ 0.006998] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008251] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.010414] rcu: Hierarchical SRCU implementation. [ 0.013539] EFI services will not be available. [ 0.014374] smp: Bringing up secondary CPUs ... [ 0.015770] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015780] CPU1: Spectre v2: using BPIALL workaround [ 0.017512] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.017521] CPU2: Spectre v2: using BPIALL workaround [ 0.019012] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.019022] CPU3: Spectre v2: using BPIALL workaround [ 0.019197] smp: Brought up 1 node, 4 CPUs [ 0.019209] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.019214] CPU: All CPU(s) started in SVC mode. [ 0.021001] devtmpfs: initialized [ 0.035624] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.036748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.036913] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053113] xor: measuring software checksum speed [ 0.063037] arm4regs : 1196.000 MB/sec [ 0.073028] 8regs : 912.000 MB/sec [ 0.083030] 32regs : 964.000 MB/sec [ 0.093029] neon : 888.000 MB/sec [ 0.093036] xor: using function: arm4regs (1196.000 MB/sec) [ 0.093185] pinctrl core: initialized pinctrl subsystem [ 0.095309] DMI not present or invalid. [ 0.096280] NET: Registered protocol family 16 [ 0.111279] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.112446] audit: initializing netlink subsys (disabled) [ 0.112781] audit: type=2000 audit(0.110:1): state=initialized audit_enabled=0 res=1 [ 0.114510] thermal_sys: Registered thermal governor 'fair_share' [ 0.114516] thermal_sys: Registered thermal governor 'step_wise' [ 0.114525] thermal_sys: Registered thermal governor 'user_space' [ 0.114756] cpuidle: using governor menu [ 0.115440] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.559519] No ATAGs? [ 0.559730] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.559737] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.563044] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.565978] Serial: AMBA PL011 UART driver [ 0.586532] cryptd: max_cpu_qlen set to 1000 [ 0.596017] raid6: skip pq benchmark and using algorithm neonx8 [ 0.596072] raid6: using neon recovery algorithm [ 0.617179] vcc_3v3: supplied by v_5v0 [ 0.617303] v_usb2: supplied by v_5v0 [ 0.618144] v_usb1: supplied by v_5v0 [ 0.619517] iommu: Default domain type: Translated [ 0.620929] vgaarb: loaded [ 0.622259] SCSI subsystem initialized [ 0.622602] libata version 3.00 loaded. [ 0.622955] usbcore: registered new interface driver usbfs [ 0.623058] usbcore: registered new interface driver hub [ 0.623213] usbcore: registered new device driver usb [ 0.623932] pps_core: LinuxPPS API ver. 1 registered [ 0.623939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.623963] PTP clock support registered [ 0.624445] EDAC MC: Ver: 3.0.0 [ 0.627744] NetLabel: Initializing [ 0.627752] NetLabel: domain hash size = 128 [ 0.627757] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.627850] NetLabel: unlabeled traffic allowed by default [ 0.628726] clocksource: Switched to clocksource mxc_timer1 [ 0.868855] VFS: Disk quotas dquot_6.6.0 [ 0.869000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.886136] NET: Registered protocol family 2 [ 0.887545] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.887660] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.887929] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.888058] TCP: Hash tables configured (established 8192 bind 8192) [ 0.888395] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.888492] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.888877] NET: Registered protocol family 1 [ 0.888914] NET: Registered protocol family 44 [ 0.888933] PCI: CLS 0 bytes, default 64 [ 0.889869] Trying to unpack rootfs image as initramfs... [ 2.680034] Freeing initrd memory: 19068K [ 2.680986] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.681382] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.685297] Initialise system trusted keyrings [ 2.685377] Key type blacklist registered [ 2.685768] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.697525] zbud: loaded [ 2.702077] fuse: init (API version 7.31) [ 2.705328] integrity: Platform Keyring initialized [ 2.819749] Key type asymmetric registered [ 2.819759] Asymmetric key parser 'x509' registered [ 2.820412] bounce: pool size: 64 pages [ 2.820671] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.821117] io scheduler mq-deadline registered [ 2.821125] io scheduler kyber registered [ 2.821410] io scheduler bfq registered [ 2.848986] Driver 'scmi-reset' was unable to register with bus_type 'scmi_protocol' because the bus was not initialized. [ 2.850200] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.866676] Serial: AMBA driver [ 2.867897] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 2.869620] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 65, base_baud = 5000000) is a IMX [ 2.871566] msm_serial: driver initialized [ 2.871572] STMicroelectronics ASC driver initialized [ 2.873125] STM32 USART driver initialized [ 2.879691] libphy: Fixed MDIO Bus: probed [ 2.880046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.880070] ehci-pci: EHCI PCI platform driver [ 2.880148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.880301] usbcore: registered new interface driver usb-storage [ 2.880465] usbcore: registered new interface driver usbserial_generic [ 2.880503] usbserial: USB Serial support registered for generic [ 2.880819] mousedev: PS/2 mouse device common for all mice [ 2.882136] i2c /dev entries driver [ 2.886079] device-mapper: uevent: version 1.0.3 [ 2.886562] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 2.889260] ledtrig-cpu: registered to indicate activity on CPUs [ 2.890740] hid: raw HID events driver (C) Jiri Kosina [ 2.890926] usbcore: registered new interface driver usbhid [ 2.890930] usbhid: USB HID core driver [ 2.893559] drop_monitor: Initializing network drop monitor service [ 2.893993] Initializing XFRM netlink socket [ 2.894906] NET: Registered protocol family 10 [ 2.960682] Segment Routing with IPv6 [ 2.960921] NET: Registered protocol family 17 [ 2.962816] ThumbEE CPU extension supported. [ 2.962835] Registering SWP/SWPB emulation handler [ 2.963341] registered taskstats version 1 [ 2.963420] Loading compiled-in X.509 certificates [ 2.972579] Loaded X.509 cert 'Build time autogenerated kernel key: bc9c3ac2ca43d484ce680cb6779660bc51753e4f' [ 2.972922] zswap: loaded using pool lzo/zbud [ 2.974246] Key type ._fscrypt registered [ 2.974254] Key type .fscrypt registered [ 2.974259] Key type fscrypt-provisioning registered [ 2.990586] Btrfs loaded, crc32c=crc32c-generic [ 3.021985] Key type encrypted registered [ 3.022040] ima: No TPM chip found, activating TPM-bypass! [ 3.022077] ima: Allocated hash algorithm: sha256 [ 3.022135] ima: No architecture policies found [ 3.082395] Freeing unused kernel memory: 2048K [ 3.083327] ------------[ cut here ]------------ [ 3.083358] WARNING: CPU: 1 PID: 1 at arch/arm/mm/dump.c:249 note_page+0x158/0x324 [ 3.083372] arm/mm: Found insecure W+X mapping at address 0xf0a39000 [ 3.083376] Modules linked in: [ 3.083394] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.14-imx6 #20.11.3 [ 3.083400] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.083439] [] (unwind_backtrace) from [] (show_stack+0x18/0x1c) [ 3.083463] [] (show_stack) from [] (dump_stack+0xb8/0xd8) [ 3.083488] [] (dump_stack) from [] (__warn+0xd4/0xec) [ 3.083515] [] (__warn) from [] (warn_slowpath_fmt+0x70/0x90) [ 3.083531] [] (warn_slowpath_fmt) from [] (note_page+0x158/0x324) [ 3.083547] [] (note_page) from [] (walk_pgd+0xcc/0xe0) [ 3.083560] [] (walk_pgd) from [] (ptdump_check_wx+0x58/0xac) [ 3.083583] [] (ptdump_check_wx) from [] (kernel_init+0x38/0x150) [ 3.083599] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 3.083606] Exception stack(0xee961fb0 to 0xee961ff8) [ 3.083616] 1fa0: 00000000 00000000 00000000 00000000 [ 3.083626] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.083635] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.083644] ---[ end trace df7b03f73af854af ]--- [ 3.083873] Checked W+X mappings: FAILED, 1 W+X pages found [ 3.083886] rodata_test: test data was not read only [ 3.083927] Run /init as init process [ 3.083934] with arguments: [ 3.083938] /init [ 3.083946] with environment: [ 3.083951] HOME=/ [ 3.083957] TERM=linux [ 3.084629] process '/usr/bin/sh' started with executable stack [ 3.107800] fbcon: Taking over console [ 3.554756] random: fast init done [ 3.824239] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.968996] vdd1p1: supplied by regulator-dummy [ 3.970904] vdd3p0: supplied by regulator-dummy [ 3.972365] vdd2p5: supplied by regulator-dummy [ 3.973963] vddarm: supplied by regulator-dummy [ 3.975356] vddpu: supplied by regulator-dummy [ 3.977228] vddsoc: supplied by regulator-dummy [ 4.082867] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 4.082917] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-04-16T05:15:15 UTC (9090915) [ 4.084546] sdhci: Secure Digital Host Controller Interface driver [ 4.084552] sdhci: Copyright(c) Pierre Ossman [ 4.105662] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.125816] sdhci-esdhc-imx 2190000.mmc: allocated mmc-pwrseq [ 4.134524] pps pps0: new PPS source ptp0 [ 4.137123] i2c i2c-1: IMX I2C adapter registered [ 4.146580] i2c i2c-2: IMX I2C adapter registered [ 4.151980] libphy: fec_enet_mii_bus: probed [ 4.188971] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.194190] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 4.194892] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 4.223426] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 [ 4.223443] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 [ 4.223455] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 [ 4.223465] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.223577] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.224023] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.224150] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.226855] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.226894] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.226908] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.232115] imx_usb 2184000.usb: No over current polarity defined [ 4.236218] scsi host0: ahci-imx [ 4.237351] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 68 [ 4.251859] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.252320] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.259814] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.260305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.260318] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.260326] usb usb1: Product: EHCI Host Controller [ 4.260334] usb usb1: Manufacturer: Linux 5.9.14-imx6 ehci_hcd [ 4.260342] usb usb1: SerialNumber: ci_hdrc.0 [ 4.261587] hub 1-0:1.0: USB hub found [ 4.261671] hub 1-0:1.0: 1 port detected [ 4.265501] imx_usb 2184200.usb: No over current polarity defined [ 4.270863] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.271274] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 4.278832] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.279343] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.279358] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.279367] usb usb2: Product: EHCI Host Controller [ 4.279375] usb usb2: Manufacturer: Linux 5.9.14-imx6 ehci_hcd [ 4.279382] usb usb2: SerialNumber: ci_hdrc.1 [ 4.280494] hub 2-0:1.0: USB hub found [ 4.280577] hub 2-0:1.0: 1 port detected [ 4.354558] rtc-pcf8523 2-0068: registered as rtc1 [ 4.383843] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.385555] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 4.400772] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.402573] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.404373] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.407597] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.410894] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.418157] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.462014] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.464250] mmc1: new high speed SDHC card at address 59b4 [ 4.474259] mmc0: new high speed SDIO card at address 0001 [ 4.480246] mmcblk1: mmc1:59b4 EB2MW 29.8 GiB [ 4.485544] mmcblk1: p1 [ 13.981787] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.982212] ata1.15: Port Multiplier 1.2, 0x197b:0x0562 r0, 2 ports, feat 0x5/0xf [ 13.988605] ata1.00: hard resetting link [ 14.425971] ata1.00: link resume succeeded after 1 retries [ 14.690122] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.690179] ata1.01: hard resetting link [ 15.729870] ata1.01: failed to resume link (SControl 0) [ 15.730303] ata1.01: SATA link down (SStatus 0 SControl 0) [ 15.730926] ata1.00: ATA-9: WDC WD121KRYZ-01W0RB0, 01.01H01, max UDMA/133 [ 15.730937] ata1.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 32) [ 15.734980] ata1.00: configured for UDMA/133 [ 15.735092] ata1: EH complete [ 15.735907] scsi 0:0:0:0: Direct-Access ATA WDC WD121KRYZ-01 1H01 PQ: 0 ANSI: 5 [ 15.737526] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.738289] sd 0:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 15.738304] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 15.738410] sd 0:0:0:0: [sda] Write Protect is off [ 15.738423] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.738604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.796012] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 15.800705] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.426267] md0: WARNING: sda3 appears to be on the same physical disk as sda5. [ 16.426274] True protection against single-disk failure might be compromised. [ 16.426797] md/raid1:md0: active with 2 out of 2 mirrors [ 16.426922] md0: detected capacity change from 0 to 21458059264 [ 16.954470] random: crng init done [ 17.385915] async_tx: api initialized (async) [ 17.986586] BTRFS: device fsid 6ada4766-740b-4df6-9f0b-e6ed894ece69 devid 1 transid 35323 /dev/sda6 scanned by btrfs (216) [ 18.286099] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 18.741876] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 19.431590] systemd[1]: System time before build time, advancing clock. [ 19.548424] systemd[1]: Inserted module 'autofs4' [ 19.625247] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.626201] systemd[1]: Detected architecture arm. [ 19.645227] systemd[1]: Set hostname to . [ 20.503605] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly. [ 20.544927] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly. [ 20.570568] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly. [ 20.630628] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid \xe2\x86\x92 /run/fail2ban/fail2ban.pid; please update the unit file accordingly. [ 20.812583] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 20.815750] systemd[1]: Listening on Syslog Socket. [ 20.860378] systemd[1]: Listening on RPCbind Server Activation Socket. [ 21.121490] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 21.278904] RPC: Registered named UNIX socket transport module. [ 21.278911] RPC: Registered udp transport module. [ 21.278917] RPC: Registered tcp transport module. [ 21.278922] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.560797] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.656066] imx-ipuv3 2400000.ipu: IPUv3H probed [ 22.662913] imx-ipuv3 2800000.ipu: IPUv3H probed [ 22.686192] Registered IR keymap rc-empty [ 22.686343] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 22.686628] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 22.686929] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input1 [ 22.693055] mc: Linux media interface: v0.10 [ 22.778545] videodev: Linux video capture interface: v2.00 [ 22.893386] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 22.893607] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 22.893846] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 22.894011] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 22.894332] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 22.895910] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 22.897470] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 22.897851] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 22.997614] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 23.030796] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 23.031960] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 23.031966] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 23.035071] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 23.035095] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 23.035611] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 23.035831] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 23.035845] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 23.036824] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 23.529047] caam 2100000.crypto: Entropy delay = 3200 [ 23.589854] caam 2100000.crypto: Instantiated RNG4 SH0 [ 23.650615] caam 2100000.crypto: Instantiated RNG4 SH1 [ 23.656346] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 23.656369] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 23.664483] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 23.664502] caam 2100000.crypto: job rings = 2, qi = 0 [ 23.860778] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 23.888866] rc rc0: two consecutive events of type space [ 24.133645] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 24.141652] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 24.141870] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 24.141884] cfg80211: failed to load regulatory.db [ 24.197098] fsl-spdif-dai 2004000.spdif: Missing dma channel for stream: 0 [ 24.197115] fsl-spdif-dai 2004000.spdif: ASoC: error at snd_soc_pcm_component_new on 2004000.spdif: -22 [ 24.197123] S!PDIF PCM: ASoC: pcm S/PDIF PCM snd-soc-dummy-dai-0 constructor failed for dailink S/PDIF PCM: -22 [ 24.197131] imx-spdif sound-spdif: ASoC: can't create pcm S/PDIF PCM :-22 [ 24.197477] imx-spdif sound-spdif: snd_soc_register_card failed: -22 [ 24.197515] imx-spdif: probe of sound-spdif failed with error -22 [ 24.240052] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 24.240408] usbcore: registered new interface driver brcmfmac [ 24.240770] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.bin failed with error -2 [ 24.570170] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.572442] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.580864] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.593386] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 24.631050] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 24.631956] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 24.632923] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 24.633912] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 24.635550] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 24.636125] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 24.636516] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 24.642587] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 24.663943] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 4. [ 25.059349] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 2. [ 25.123417] caam algorithms registered in /proc/crypto [ 25.126339] caam 2100000.crypto: registering rng-caam [ 25.243954] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 25.281004] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 6. [ 25.356946] systemd[1]: Found device /dev/md0. [ 25.459682] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 25.460165] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 25.469556] systemd[1]: Starting Load Kernel Modules... [ 25.470576] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 25.471162] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 25.472107] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 25.535346] BTRFS info (device sda6): disk space caching is enabled [ 25.535359] BTRFS info (device sda6): has skinny extents [ 25.609643] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 25.656583] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 25.699813] Adding 5242876k swap on /dev/sda2. Priority:-2 extents:1 across:5242876k FS [ 26.233503] zram: Added device: zram0 [ 26.234937] zram: Added device: zram1 [ 26.236331] zram: Added device: zram2 [ 26.434117] zram0: detected capacity change from 0 to 1054199808 [ 26.504809] Adding 1029488k swap on /dev/zram0. Priority:5 extents:1 across:1029488k SSFS [ 26.819467] zram1: detected capacity change from 0 to 52428800 [ 27.101076] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 27.101137] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 32.388049] systemd[1]: Started Armbian memory supported logging. [ 32.401811] systemd[1]: Starting Journal Service... [ 32.684573] systemd[1]: Started Journal Service. [ 32.783595] systemd-journald[652]: Received request to flush runtime journal from PID 1 ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=cubox-i BOARD_NAME="Cubox i2eX/i4" BOARDFAMILY=imx6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=5f03d652 DISTRIBUTION_CODENAME=buster DISTRIBUTION_STATUS=supported VERSION=21.02.1 LINUXFAMILY=imx6 BRANCH=current ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image ### boot environment: verbosity=1 rootdev=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: ARM Model: 10 Model name: Cortex-A9 Stepping: r2p10 CPU max MHz: 996.0000 CPU min MHz: 396.0000 BogoMIPS: 7.54 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 1 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 2 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 3 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) Revision : 0000 Serial : 0000000000000000 ### meminfo: MemTotal: 2058980 kB MemFree: 1903636 kB MemAvailable: 1966628 kB Buffers: 14004 kB Cached: 62864 kB SwapCached: 0 kB Active: 44900 kB Inactive: 39128 kB Active(anon): 196 kB Inactive(anon): 10068 kB Active(file): 44704 kB Inactive(file): 29060 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1310720 kB HighFree: 1234432 kB LowTotal: 748260 kB LowFree: 669204 kB SwapTotal: 6272364 kB SwapFree: 6272364 kB Dirty: 12980 kB Writeback: 0 kB AnonPages: 7268 kB Mapped: 9864 kB Shmem: 3036 kB KReclaimable: 15900 kB Slab: 40852 kB SReclaimable: 15900 kB SUnreclaim: 24952 kB KernelStack: 1200 kB PageTables: 360 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 7301852 kB Committed_AS: 14292 kB VmallocTotal: 245760 kB VmallocUsed: 15648 kB VmallocChunk: 0 kB Percpu: 816 kB CmaTotal: 262144 kB CmaFree: 259144 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.compaction_proactiveness = 20 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirty_writeback_centisecs = 500 vm.dirtytime_expire_seconds = 43200 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3410 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.unprivileged_userfaultfd = 1 vm.user_reserve_kbytes = 63473 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 ### ip addr: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d0:63:b4:00:7e:35 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31276032 mmcblk1 179 1 30959168 mmcblk1p1 8 0 11718885376 sda 8 1 33554432 sda1 8 2 5242880 sda2 8 3 20971520 sda3 8 4 209715200 sda4 8 5 20971520 sda5 8 6 11428428783 sda6 9 0 20955136 md0 252 0 1029492 zram0 252 1 51200 zram1 ### df: udev 868M 0 868M 0% /dev tmpfs 202M 3.0M 199M 2% /run /dev/mmcblk1p1 30G 1.9G 27G 7% / tmpfs 1006M 0 1006M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1006M 0 1006M 0% /sys/fs/cgroup /dev/md0 20G 63M 19G 1% /data/mirror /dev/sda4 196G 18G 169G 10% /data/primary tmpfs 1006M 0 1006M 0% /tmp /dev/zram1 49M 13M 33M 29% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID sda 10.9T |-sda1 32G |-sda3 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e |-sda4 ext4 200G /data/primary 0e436726-8bd4-49f6-8003-c88e937cd3dd |-sda5 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e `-sda6 btrfs 10.7T 6ada4766-740b-4df6-9f0b-e6ed894ece69 mmcblk1 29.8G `-mmcblk1p1 ext4 29.5G / 62458379-a0d4-4fd6-a56b-e7211fa6aab0 zram1 50M /var/log ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 132K 694B 52K 4 /var/log /dev/zram0 lzo-rle 1005.4M 4K 74B 4K 4 [SWAP] ### mtab: /dev/md0 /data/mirror ext4 rw,noatime,nodiratime 0 0 /dev/mmcblk1p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/sda4 /data/primary ext4 rw,noatime,nodiratime 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc1:59b4 info: manfid: 0x00001b cid: 1b534d4542324d5730140f6145011200 fwrev: 0x0 rca: 0x59b4 csd: 400e00325b590000ee9d7f800a400000 ocr: 0x00200000 type: SD date: 02/2017 hwrev: 0x3 dsr: 0x404 serial: 0x140f6145 erase_size: 512 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=EB2MW MODALIAS=mmc:block ssr: 00000000050000000400900008111900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 0235800300000000 oemid: 0x534d preferred_erase_size: 4194304 name: EB2MW ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:09:30: 996MHz 1.83 41% 21% 10% 0% 7% 2% 51.8°C 0/6 21:09:30: 996MHz 1.83 98% 57% 20% 1% 12% 6% 51.8°C 0/6 21:09:31: 996MHz 1.83 92% 55% 15% 1% 13% 6% 52.4°C 0/6 21:09:32: 996MHz 1.83 100% 47% 40% 1% 2% 7% 52.9°C 0/6 21:09:32: 996MHz 1.83 99% 51% 33% 1% 4% 7% 52.9°C 0/6 ### Activated 1 lzo-rle zram swap devices with 1005 MB each ### Activated Armbian ramlog partition with zstd compression Sat Feb 6 21:22:11 GMT 2021 | Cubox i2eX/i4 | 21.02.1 | armhf | armv7l | 5.9.14-imx6 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.9.14-imx6 (root@beast) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #20.11.3 SMP Fri Dec 11 20:57:51 CET 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Cubox-i Dual/Quad [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x80000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 19 pages/cpu s47116 r8192 d22516 u77824 [ 0.000000] pcpu-alloc: s47116 r8192 d22516 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: root=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 rootwait console=tty1 consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080m60,if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 1775720K/2097152K available (10292K kernel code, 1550K rwdata, 5340K rodata, 2048K init, 535K bss, 59288K reserved, 262144K cma-reserved, 1048576K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x324 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 46303 entries in 91 pages [ 0.000000] ftrace: allocated 91 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003647] Console: colour dummy device 80x30 [ 0.003670] printk: console [tty1] enabled [ 0.003757] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) [ 0.003771] pid_max: default: 32768 minimum: 301 [ 0.004189] LSM: Security Framework initializing [ 0.004304] Yama: becoming mindful. [ 0.004413] SELinux: Initializing. [ 0.004567] TOMOYO Linux initialized [ 0.004689] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004715] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006406] CPU: Testing write buffer coherency: ok [ 0.006453] CPU0: Spectre v2: using BPIALL workaround [ 0.007014] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008251] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.010424] rcu: Hierarchical SRCU implementation. [ 0.013558] EFI services will not be available. [ 0.014386] smp: Bringing up secondary CPUs ... [ 0.015786] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015797] CPU1: Spectre v2: using BPIALL workaround [ 0.017534] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.017546] CPU2: Spectre v2: using BPIALL workaround [ 0.019066] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.019076] CPU3: Spectre v2: using BPIALL workaround [ 0.019277] smp: Brought up 1 node, 4 CPUs [ 0.019289] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.019296] CPU: All CPU(s) started in SVC mode. [ 0.021066] devtmpfs: initialized [ 0.035610] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.036686] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.036856] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053311] xor: measuring software checksum speed [ 0.063034] arm4regs : 1196.000 MB/sec [ 0.073029] 8regs : 912.000 MB/sec [ 0.083029] 32regs : 964.000 MB/sec [ 0.093027] neon : 888.000 MB/sec [ 0.093034] xor: using function: arm4regs (1196.000 MB/sec) [ 0.093179] pinctrl core: initialized pinctrl subsystem [ 0.095334] DMI not present or invalid. [ 0.096296] NET: Registered protocol family 16 [ 0.111157] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.112338] audit: initializing netlink subsys (disabled) [ 0.112669] audit: type=2000 audit(0.110:1): state=initialized audit_enabled=0 res=1 [ 0.114405] thermal_sys: Registered thermal governor 'fair_share' [ 0.114411] thermal_sys: Registered thermal governor 'step_wise' [ 0.114419] thermal_sys: Registered thermal governor 'user_space' [ 0.114649] cpuidle: using governor menu [ 0.115348] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.559619] No ATAGs? [ 0.559833] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.559841] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.563158] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.566126] Serial: AMBA PL011 UART driver [ 0.586690] cryptd: max_cpu_qlen set to 1000 [ 0.596369] raid6: skip pq benchmark and using algorithm neonx8 [ 0.596378] raid6: using neon recovery algorithm [ 0.617469] vcc_3v3: supplied by v_5v0 [ 0.617589] v_usb2: supplied by v_5v0 [ 0.618431] v_usb1: supplied by v_5v0 [ 0.619805] iommu: Default domain type: Translated [ 0.621299] vgaarb: loaded [ 0.622536] SCSI subsystem initialized [ 0.622901] libata version 3.00 loaded. [ 0.623298] usbcore: registered new interface driver usbfs [ 0.623371] usbcore: registered new interface driver hub [ 0.623523] usbcore: registered new device driver usb [ 0.624266] pps_core: LinuxPPS API ver. 1 registered [ 0.624274] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.624298] PTP clock support registered [ 0.624776] EDAC MC: Ver: 3.0.0 [ 0.628000] NetLabel: Initializing [ 0.628007] NetLabel: domain hash size = 128 [ 0.628012] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.628140] NetLabel: unlabeled traffic allowed by default [ 0.628977] clocksource: Switched to clocksource mxc_timer1 [ 0.869057] VFS: Disk quotas dquot_6.6.0 [ 0.869206] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.886421] NET: Registered protocol family 2 [ 0.887818] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.887936] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.888192] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.888325] TCP: Hash tables configured (established 8192 bind 8192) [ 0.888682] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.888778] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.889163] NET: Registered protocol family 1 [ 0.889199] NET: Registered protocol family 44 [ 0.889218] PCI: CLS 0 bytes, default 64 [ 0.890170] Trying to unpack rootfs image as initramfs... [ 2.679552] Freeing initrd memory: 19068K [ 2.680508] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.680911] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.684818] Initialise system trusted keyrings [ 2.684876] Key type blacklist registered [ 2.685281] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.697051] zbud: loaded [ 2.701574] fuse: init (API version 7.31) [ 2.704821] integrity: Platform Keyring initialized [ 2.816714] Key type asymmetric registered [ 2.816723] Asymmetric key parser 'x509' registered [ 2.817403] bounce: pool size: 64 pages [ 2.817588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.817935] io scheduler mq-deadline registered [ 2.817944] io scheduler kyber registered [ 2.818249] io scheduler bfq registered [ 2.845828] Driver 'scmi-reset' was unable to register with bus_type 'scmi_protocol' because the bus was not initialized. [ 2.846949] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.863420] Serial: AMBA driver [ 2.864545] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 2.866260] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 65, base_baud = 5000000) is a IMX [ 2.868277] msm_serial: driver initialized [ 2.868283] STMicroelectronics ASC driver initialized [ 2.869838] STM32 USART driver initialized [ 2.876280] libphy: Fixed MDIO Bus: probed [ 2.876628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.876654] ehci-pci: EHCI PCI platform driver [ 2.876735] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.876844] usbcore: registered new interface driver usb-storage [ 2.877012] usbcore: registered new interface driver usbserial_generic [ 2.877053] usbserial: USB Serial support registered for generic [ 2.877333] mousedev: PS/2 mouse device common for all mice [ 2.878604] i2c /dev entries driver [ 2.882539] device-mapper: uevent: version 1.0.3 [ 2.883132] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 2.885774] ledtrig-cpu: registered to indicate activity on CPUs [ 2.887283] hid: raw HID events driver (C) Jiri Kosina [ 2.887450] usbcore: registered new interface driver usbhid [ 2.887455] usbhid: USB HID core driver [ 2.890078] drop_monitor: Initializing network drop monitor service [ 2.890472] Initializing XFRM netlink socket [ 2.891387] NET: Registered protocol family 10 [ 2.958279] Segment Routing with IPv6 [ 2.958464] NET: Registered protocol family 17 [ 2.960266] ThumbEE CPU extension supported. [ 2.960285] Registering SWP/SWPB emulation handler [ 2.960755] registered taskstats version 1 [ 2.960854] Loading compiled-in X.509 certificates [ 2.970083] Loaded X.509 cert 'Build time autogenerated kernel key: bc9c3ac2ca43d484ce680cb6779660bc51753e4f' [ 2.970403] zswap: loaded using pool lzo/zbud [ 2.971636] Key type ._fscrypt registered [ 2.971643] Key type .fscrypt registered [ 2.971648] Key type fscrypt-provisioning registered [ 2.987931] Btrfs loaded, crc32c=crc32c-generic [ 3.019153] Key type encrypted registered [ 3.019210] ima: No TPM chip found, activating TPM-bypass! [ 3.019246] ima: Allocated hash algorithm: sha256 [ 3.019324] ima: No architecture policies found [ 3.078847] Freeing unused kernel memory: 2048K [ 3.082810] ------------[ cut here ]------------ [ 3.082842] WARNING: CPU: 3 PID: 1 at arch/arm/mm/dump.c:249 note_page+0x158/0x324 [ 3.082857] arm/mm: Found insecure W+X mapping at address 0xf0a39000 [ 3.082861] Modules linked in: [ 3.082877] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.9.14-imx6 #20.11.3 [ 3.082883] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.082923] [] (unwind_backtrace) from [] (show_stack+0x18/0x1c) [ 3.082946] [] (show_stack) from [] (dump_stack+0xb8/0xd8) [ 3.082971] [] (dump_stack) from [] (__warn+0xd4/0xec) [ 3.082999] [] (__warn) from [] (warn_slowpath_fmt+0x70/0x90) [ 3.083017] [] (warn_slowpath_fmt) from [] (note_page+0x158/0x324) [ 3.083029] [] (note_page) from [] (walk_pgd+0xcc/0xe0) [ 3.083042] [] (walk_pgd) from [] (ptdump_check_wx+0x58/0xac) [ 3.083061] [] (ptdump_check_wx) from [] (kernel_init+0x38/0x150) [ 3.083077] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 3.083085] Exception stack(0xee961fb0 to 0xee961ff8) [ 3.083095] 1fa0: 00000000 00000000 00000000 00000000 [ 3.083105] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.083115] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.083163] ---[ end trace c17a94a471c8fed0 ]--- [ 3.083354] Checked W+X mappings: FAILED, 1 W+X pages found [ 3.083364] rodata_test: test data was not read only [ 3.083403] Run /init as init process [ 3.083410] with arguments: [ 3.083414] /init [ 3.083420] with environment: [ 3.083425] HOME=/ [ 3.083432] TERM=linux [ 3.084145] process '/usr/bin/sh' started with executable stack [ 3.107716] fbcon: Taking over console [ 3.606998] random: fast init done [ 3.836096] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.948911] vdd1p1: supplied by regulator-dummy [ 3.950628] vdd3p0: supplied by regulator-dummy [ 3.951942] vdd2p5: supplied by regulator-dummy [ 3.953682] vddarm: supplied by regulator-dummy [ 3.955264] vddpu: supplied by regulator-dummy [ 3.957923] vddsoc: supplied by regulator-dummy [ 4.027919] sdhci: Secure Digital Host Controller Interface driver [ 4.027926] sdhci: Copyright(c) Pierre Ossman [ 4.058608] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.071670] sdhci-esdhc-imx 2190000.mmc: allocated mmc-pwrseq [ 4.086655] pps pps0: new PPS source ptp0 [ 4.094954] libphy: fec_enet_mii_bus: probed [ 4.109125] i2c i2c-1: IMX I2C adapter registered [ 4.111616] i2c i2c-2: IMX I2C adapter registered [ 4.126318] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.139335] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 4.139398] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-04-16T05:27:58 UTC (9091678) [ 4.174754] imx_usb 2184000.usb: No over current polarity defined [ 4.185474] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 4.186209] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 4.194312] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.194933] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.202057] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.202569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.202585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.202594] usb usb1: Product: EHCI Host Controller [ 4.202603] usb usb1: Manufacturer: Linux 5.9.14-imx6 ehci_hcd [ 4.202611] usb usb1: SerialNumber: ci_hdrc.0 [ 4.203722] hub 1-0:1.0: USB hub found [ 4.203798] hub 1-0:1.0: 1 port detected [ 4.205907] imx_usb 2184200.usb: No over current polarity defined [ 4.210093] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.210522] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 4.214173] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 [ 4.214187] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 [ 4.214198] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 [ 4.214208] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.214311] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.214591] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.214753] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.218084] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.218200] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.218251] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.218280] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.218741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.218763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.218779] usb usb2: Product: EHCI Host Controller [ 4.218793] usb usb2: Manufacturer: Linux 5.9.14-imx6 ehci_hcd [ 4.218805] usb usb2: SerialNumber: ci_hdrc.1 [ 4.220551] hub 2-0:1.0: USB hub found [ 4.220742] hub 2-0:1.0: 1 port detected [ 4.230904] scsi host0: ahci-imx [ 4.231748] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 68 [ 4.336581] rtc-pcf8523 2-0068: registered as rtc1 [ 4.337457] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.339322] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 4.355247] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.357189] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.359081] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.362433] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.365795] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.373469] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.419434] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.420149] mmc0: new high speed SDIO card at address 0001 [ 4.421753] mmc1: new high speed SDHC card at address 59b4 [ 4.437786] mmcblk1: mmc1:59b4 EB2MW 29.8 GiB [ 4.443103] mmcblk1: p1 [ 13.983038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.983448] ata1.15: Port Multiplier 1.2, 0x197b:0x0562 r0, 2 ports, feat 0x5/0xf [ 13.989847] ata1.00: hard resetting link [ 14.427086] ata1.00: link resume succeeded after 1 retries [ 14.691394] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.691456] ata1.01: hard resetting link [ 15.731075] ata1.01: failed to resume link (SControl 0) [ 15.731499] ata1.01: SATA link down (SStatus 0 SControl 0) [ 15.732103] ata1.00: ATA-9: WDC WD121KRYZ-01W0RB0, 01.01H01, max UDMA/133 [ 15.732113] ata1.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 32) [ 15.736055] ata1.00: configured for UDMA/133 [ 15.736183] ata1: EH complete [ 15.737077] scsi 0:0:0:0: Direct-Access ATA WDC WD121KRYZ-01 1H01 PQ: 0 ANSI: 5 [ 15.738703] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.739524] sd 0:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 15.739539] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 15.739642] sd 0:0:0:0: [sda] Write Protect is off [ 15.739656] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.739841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.793729] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 15.798448] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.468444] md0: WARNING: sda5 appears to be on the same physical disk as sda3. [ 16.468455] True protection against single-disk failure might be compromised. [ 16.469312] md/raid1:md0: active with 2 out of 2 mirrors [ 16.469504] md0: detected capacity change from 0 to 21458059264 [ 16.898006] async_tx: api initialized (async) [ 17.283022] random: crng init done [ 17.430677] BTRFS: device fsid 6ada4766-740b-4df6-9f0b-e6ed894ece69 devid 1 transid 35324 /dev/sda6 scanned by btrfs (217) [ 17.717224] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 18.164393] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 18.853902] systemd[1]: System time before build time, advancing clock. [ 18.970649] systemd[1]: Inserted module 'autofs4' [ 19.047704] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.048655] systemd[1]: Detected architecture arm. [ 19.070233] systemd[1]: Set hostname to . [ 19.922805] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly. [ 19.963908] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly. [ 19.989748] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly. [ 20.049790] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid \xe2\x86\x92 /run/fail2ban/fail2ban.pid; please update the unit file accordingly. [ 20.240024] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 20.244611] systemd[1]: Created slice system-getty.slice. [ 20.284937] systemd[1]: Listening on RPCbind Server Activation Socket. [ 20.687104] RPC: Registered named UNIX socket transport module. [ 20.687116] RPC: Registered udp transport module. [ 20.687121] RPC: Registered tcp transport module. [ 20.687126] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.751844] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 20.959937] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.137927] imx-ipuv3 2400000.ipu: IPUv3H probed [ 22.145663] imx-ipuv3 2800000.ipu: IPUv3H probed [ 22.187156] Registered IR keymap rc-empty [ 22.187307] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 22.191099] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 22.191342] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input1 [ 22.192149] mc: Linux media interface: v0.10 [ 22.241949] videodev: Linux video capture interface: v2.00 [ 22.335142] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 22.335441] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 22.335632] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 22.335796] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 22.336218] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 22.344300] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 22.347571] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 22.353178] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 22.521225] rc rc0: two consecutive events of type space [ 22.527489] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 22.528312] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 22.529019] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 22.529087] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 22.529788] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 22.530043] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 22.530057] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 22.531083] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 22.604953] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 22.650247] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 22.853488] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 22.853512] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 23.066797] caam 2100000.crypto: Entropy delay = 3200 [ 23.083587] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 23.127609] caam 2100000.crypto: Instantiated RNG4 SH0 [ 23.188363] caam 2100000.crypto: Instantiated RNG4 SH1 [ 23.188807] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 23.188828] caam 2100000.crypto: job rings = 2, qi = 0 [ 23.414744] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.419394] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.419567] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 23.419578] cfg80211: failed to load regulatory.db [ 23.563495] fsl-spdif-dai 2004000.spdif: Missing dma channel for stream: 0 [ 23.563512] fsl-spdif-dai 2004000.spdif: ASoC: error at snd_soc_pcm_component_new on 2004000.spdif: -22 [ 23.563520] S!PDIF PCM: ASoC: pcm S/PDIF PCM snd-soc-dummy-dai-0 constructor failed for dailink S/PDIF PCM: -22 [ 23.563530] imx-spdif sound-spdif: ASoC: can't create pcm S/PDIF PCM :-22 [ 23.563850] imx-spdif sound-spdif: snd_soc_register_card failed: -22 [ 23.563892] imx-spdif: probe of sound-spdif failed with error -22 [ 23.564944] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 23.565329] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.bin failed with error -2 [ 23.565760] usbcore: registered new interface driver brcmfmac [ 23.861942] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.872565] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.879353] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 23.881413] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 23.882428] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 23.884352] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 23.887918] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.890159] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.901919] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 23.905784] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 23.907140] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 23.908114] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 24.059422] systemd[1]: Started MD array monitor. [ 24.079337] systemd[1]: Mounting /data/mirror... [ 24.143614] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 24.208656] systemd[1]: Mounted /data/mirror. [ 24.459525] caam algorithms registered in /proc/crypto [ 24.476343] caam 2100000.crypto: registering rng-caam [ 24.567321] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 24.804323] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 2. [ 24.908082] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 4. [ 25.011943] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 6. [ 25.013218] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 25.013454] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 25.013536] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 25.021675] systemd[1]: Activating swap /dev/sda2... [ 25.072837] BTRFS info (device sda6): disk space caching is enabled [ 25.072849] BTRFS info (device sda6): has skinny extents [ 25.109237] Adding 5242876k swap on /dev/sda2. Priority:-2 extents:1 across:5242876k FS [ 25.154909] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 25.645758] zram: Added device: zram0 [ 25.647143] zram: Added device: zram1 [ 25.649660] zram: Added device: zram2 [ 25.841094] zram0: detected capacity change from 0 to 1054199808 [ 25.915053] Adding 1029488k swap on /dev/zram0. Priority:5 extents:1 across:1029488k SSFS [ 26.228879] zram1: detected capacity change from 0 to 52428800 [ 26.506034] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 26.506093] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 31.869060] systemd[1]: Started Armbian memory supported logging. [ 31.882380] systemd[1]: Starting Journal Service... [ 32.160389] systemd[1]: Started Journal Service. [ 32.261566] systemd-journald[652]: Received request to flush runtime journal from PID 1 ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=cubox-i BOARD_NAME="Cubox i2eX/i4" BOARDFAMILY=imx6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=5f03d652 DISTRIBUTION_CODENAME=buster DISTRIBUTION_STATUS=supported VERSION=21.02.1 LINUXFAMILY=imx6 BRANCH=current ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image ### boot environment: verbosity=1 rootdev=UUID=62458379-a0d4-4fd6-a56b-e7211fa6aab0 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: ARM Model: 10 Model name: Cortex-A9 Stepping: r2p10 CPU max MHz: 996.0000 CPU min MHz: 396.0000 BogoMIPS: 7.54 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 1 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 2 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 3 model name : ARMv7 Processor rev 10 (v7l) BogoMIPS : 7.54 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) Revision : 0000 Serial : 0000000000000000 ### meminfo: MemTotal: 2058980 kB MemFree: 1903164 kB MemAvailable: 1967032 kB Buffers: 14004 kB Cached: 63696 kB SwapCached: 0 kB Active: 45480 kB Inactive: 39400 kB Active(anon): 208 kB Inactive(anon): 10020 kB Active(file): 45272 kB Inactive(file): 29380 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1310720 kB HighFree: 1234280 kB LowTotal: 748260 kB LowFree: 668884 kB SwapTotal: 6272364 kB SwapFree: 6272364 kB Dirty: 13304 kB Writeback: 0 kB AnonPages: 7212 kB Mapped: 9568 kB Shmem: 3044 kB KReclaimable: 15888 kB Slab: 40544 kB SReclaimable: 15888 kB SUnreclaim: 24656 kB KernelStack: 1200 kB PageTables: 372 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 7301852 kB Committed_AS: 14192 kB VmallocTotal: 245760 kB VmallocUsed: 15648 kB VmallocChunk: 0 kB Percpu: 816 kB CmaTotal: 262144 kB CmaFree: 259144 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.compaction_proactiveness = 20 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirty_writeback_centisecs = 500 vm.dirtytime_expire_seconds = 43200 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3410 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.unprivileged_userfaultfd = 1 vm.user_reserve_kbytes = 63473 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 ### ip addr: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether d0:63:b4:00:7e:35 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31276032 mmcblk1 179 1 30959168 mmcblk1p1 8 0 11718885376 sda 8 1 33554432 sda1 8 2 5242880 sda2 8 3 20971520 sda3 8 4 209715200 sda4 8 5 20971520 sda5 8 6 11428428783 sda6 9 0 20955136 md0 252 0 1029492 zram0 252 1 51200 zram1 ### df: udev 868M 0 868M 0% /dev tmpfs 202M 3.0M 199M 2% /run /dev/mmcblk1p1 30G 1.9G 27G 7% / tmpfs 1006M 0 1006M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1006M 0 1006M 0% /sys/fs/cgroup /dev/md0 20G 63M 19G 1% /data/mirror /dev/sda4 196G 18G 169G 10% /data/primary tmpfs 1006M 0 1006M 0% /tmp /dev/zram1 49M 13M 32M 29% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID sda 10.9T |-sda1 32G |-sda3 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e |-sda4 ext4 200G /data/primary 0e436726-8bd4-49f6-8003-c88e937cd3dd |-sda5 linux_raid_member 20G 774d7d3b-6799-6322-1217-3f0ccb57f969 | `-md0 ext4 20G /data/mirror 4dfb5dee-c58e-483e-b639-d9bbfb94e17e `-sda6 btrfs 10.7T 6ada4766-740b-4df6-9f0b-e6ed894ece69 mmcblk1 29.8G `-mmcblk1p1 ext4 29.5G / 62458379-a0d4-4fd6-a56b-e7211fa6aab0 zram1 50M /var/log ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 132K 695B 52K 4 /var/log /dev/zram0 lzo-rle 1005.4M 4K 74B 4K 4 [SWAP] ### mtab: /dev/md0 /data/mirror ext4 rw,noatime,nodiratime 0 0 /dev/mmcblk1p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/sda4 /data/primary ext4 rw,noatime,nodiratime 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc1:59b4 info: manfid: 0x00001b cid: 1b534d4542324d5730140f6145011200 fwrev: 0x0 rca: 0x59b4 csd: 400e00325b590000ee9d7f800a400000 ocr: 0x00200000 type: SD date: 02/2017 hwrev: 0x3 dsr: 0x404 serial: 0x140f6145 erase_size: 512 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=EB2MW MODALIAS=mmc:block ssr: 00000000050000000400900008111900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 0235800300000000 oemid: 0x534d preferred_erase_size: 4194304 name: EB2MW ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:22:15: 996MHz 1.14 41% 22% 10% 0% 6% 2% 50.7°C 0/6 21:22:16: 996MHz 1.14 92% 47% 14% 0% 23% 5% 50.7°C 0/6 21:22:17: 996MHz 1.14 99% 59% 28% 1% 2% 7% 51.8°C 0/6 21:22:17: 996MHz 1.14 99% 49% 34% 1% 6% 7% 51.8°C 0/6 21:22:18: 996MHz 1.14 99% 50% 35% 1% 4% 8% 51.8°C 0/6 ### lsusb: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ci_hdrc/1p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ci_hdrc/1p, 480M ### lspci: ### Installed packages: ii armbian-config 21.02.1 all Armbian configuration utility ii hostapd 3:2.9-102~armbian20.05.2+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator ii htop 3.1.0-0~armbian20.08.2+1 armhf interactive processes viewer ii linux-base 4.6 all Linux image base package ii linux-buster-root-current-cubox-i 21.02.1 armhf Armbian tweaks for buster on cubox-i (current branch) hi linux-dtb-current-imx6 20.11.3 armhf Linux DTB, version 5.9.14-imx6 hi linux-image-current-imx6 20.11.3 armhf Linux kernel, version 5.9.14-imx6 ii linux-libc-dev:armhf 4.19.171-2 armhf Linux support headers for userspace development hi linux-u-boot-cubox-i-current 21.02.1 armhf Uboot loader 2018.01 ### Loaded modules: Module Size Used by wireguard 77824 0 curve25519_neon 28672 1 wireguard libchacha20poly1305 16384 1 wireguard chacha_neon 32768 1 libchacha20poly1305 poly1305_arm 20480 1 libchacha20poly1305 ip6_udp_tunnel 16384 1 wireguard udp_tunnel 20480 1 wireguard libblake2s 16384 1 wireguard libcurve25519_generic 20480 2 curve25519_neon,wireguard libblake2s_generic 20480 1 libblake2s xt_recent 24576 2 xt_state 16384 0 xt_nat 16384 3 veth 28672 0 xt_conntrack 16384 3 xt_MASQUERADE 20480 4 nf_conntrack_netlink 40960 0 nfnetlink 16384 2 nf_conntrack_netlink xt_addrtype 16384 2 iptable_filter 16384 1 iptable_nat 16384 1 nf_nat 45056 3 xt_nat,xt_MASQUERADE,iptable_nat nf_conntrack 147456 6 xt_state,xt_nat,xt_MASQUERADE,nf_conntrack_netlink,xt_conntrack,nf_nat nf_defrag_ipv6 20480 1 nf_conntrack nf_defrag_ipv4 16384 1 nf_conntrack br_netfilter 28672 0 bridge 192512 1 br_netfilter stp 16384 1 bridge llc 16384 2 bridge,stp overlay 106496 3 zstd 16384 4 zram 24576 2 caam_jr 126976 0 caamhash_desc 16384 1 caam_jr caamalg_desc 32768 1 caam_jr authenc 16384 1 caam_jr libdes 28672 1 caam_jr dw_hdmi_cec 16384 0 dw_hdmi_ahb_audio 16384 1 imx6_media_csi 28672 4 v4l2_fwnode 28672 1 imx6_media_csi brcmfmac 253952 0 brcmutil 20480 1 brcmfmac snd_soc_imx_spdif 16384 0 cfg80211 647168 1 brcmfmac rfkill 28672 2 cfg80211 nvmem_snvs_lpgpr 16384 0 mux_mmio 16384 0 mux_core 16384 1 mux_mmio nvmem_imx_ocotp 16384 0 caam 20480 1 caam_jr error 20480 4 caamalg_desc,caamhash_desc,caam_jr,caam snd_soc_fsl_asrc 28672 0 snd_soc_fsl_spdif 28672 0 imx_pcm_dma 16384 1 snd_soc_fsl_spdif snd_soc_core 237568 4 snd_soc_fsl_asrc,snd_soc_fsl_spdif,imx_pcm_dma,snd_soc_imx_spdif imx_sdma 28672 62 ac97_bus 16384 1 snd_soc_core snd_pcm_dmaengine 16384 2 snd_soc_fsl_asrc,snd_soc_core snd_pcm 102400 4 snd_soc_fsl_asrc,snd_pcm_dmaengine,dw_hdmi_ahb_audio,snd_soc_core imx_thermal 20480 0 snd_timer 36864 1 snd_pcm imx6_media 53248 0 snd 77824 6 dw_hdmi_ahb_audio,snd_timer,snd_soc_core,snd_pcm imx_media_common 45056 2 imx6_media,imx6_media_csi soundcore 16384 1 snd v4l2_mem2mem 32768 1 imx6_media videobuf2_dma_contig 20480 2 imx6_media,imx_media_common imx2_wdt 16384 1 etnaviv 86016 0 pwm_imx27 16384 1 videobuf2_memops 20480 1 videobuf2_dma_contig videobuf2_v4l2 24576 3 imx6_media,v4l2_mem2mem,imx_media_common dw_hdmi_imx 16384 0 gpu_sched 36864 1 etnaviv videobuf2_common 53248 5 imx6_media,v4l2_mem2mem,videobuf2_v4l2,imx6_media_csi,imx_media_common videodev 217088 7 v4l2_fwnode,videobuf2_common,imx6_media,v4l2_mem2mem,videobuf2_v4l2,imx6_media_csi,imx_media_common mc 53248 7 videobuf2_common,imx6_media,videodev,v4l2_mem2mem,videobuf2_v4l2,imx6_media_csi,imx_media_common gpio_ir_recv 16384 0 imxdrm 32768 0 rc_core 53248 2 gpio_ir_recv leds_pwm 16384 0 imx_ipu_v3 135168 11 imx6_media,imx6_media_csi,imxdrm imx6q_cpufreq 20480 0 dw_hdmi_i2s_audio 16384 0 dw_hdmi 45056 3 dw_hdmi_i2s_audio,dw_hdmi_ahb_audio,dw_hdmi_imx drm_kms_helper 208896 4 dw_hdmi,dw_hdmi_imx,imxdrm cec 53248 3 dw_hdmi_cec,dw_hdmi,drm_kms_helper nfsd 421888 13 drm 471040 8 imx_ipu_v3,etnaviv,gpu_sched,dw_hdmi,dw_hdmi_imx,imxdrm,drm_kms_helper auth_rpcgss 114688 1 nfsd fb_sys_fops 16384 1 drm_kms_helper syscopyarea 16384 1 drm_kms_helper nfs_acl 16384 1 nfsd sysfillrect 16384 1 drm_kms_helper sysimgblt 16384 1 drm_kms_helper lockd 90112 1 nfsd grace 16384 2 nfsd,lockd sunrpc 450560 19 auth_rpcgss,nfsd,nfs_acl,lockd ip_tables 24576 2 iptable_filter,iptable_nat autofs4 49152 2 raid10 57344 0 raid456 151552 0 async_raid6_recov 20480 1 raid456 async_memcpy 20480 2 raid456,async_raid6_recov async_pq 20480 2 raid456,async_raid6_recov async_xor 20480 3 async_pq,raid456,async_raid6_recov async_tx 20480 5 async_xor,async_pq,raid456,async_memcpy,async_raid6_recov raid0 24576 0 multipath 20480 0 linear 20480 0 raid1 45056 1 mmc_block 45056 2 rtc_pcf8523 16384 0 ahci_imx 20480 5 libahci_platform 20480 1 ahci_imx phy_generic 20480 0 ci_hdrc_imx 20480 0 libahci 36864 2 libahci_platform,ahci_imx ci_hdrc 57344 1 ci_hdrc_imx usb_otg_fsm 16384 1 ci_hdrc roles 16384 1 ci_hdrc rtc_snvs 16384 1 at803x 20480 1 udc_core 57344 1 ci_hdrc usbmisc_imx 24576 1 ci_hdrc_imx sdhci_esdhc_imx 32768 0 ulpi 20480 1 ci_hdrc sdhci_pltfm 16384 1 sdhci_esdhc_imx cqhci 24576 1 sdhci_esdhc_imx i2c_imx 28672 1 fec 49152 0 sdhci 61440 2 sdhci_pltfm,sdhci_esdhc_imx anatop_regulator 20480 4 phy_mxs_usb 20480 2 gpio_keys 20480 0 ### nand-sata-install.log: Sat Feb 6 21:20:56 GMT 2021: Start nand-sata-install. ### Current system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 19:53:59: 792MHz 0.08 1% 0% 0% 0% 0% 0% 37.6°C 0/6 19:54:00: 792MHz 0.08 10% 8% 0% 1% 0% 1% 38.2°C 0/6 19:54:00: 792MHz 0.08 10% 7% 0% 1% 0% 1% 38.2°C 0/6 19:54:01: 792MHz 0.08 10% 8% 0% 1% 0% 1% 38.2°C 0/6 19:54:01: 792MHz 0.08 10% 8% 0% 1% 0% 1% 38.2°C 0/6 19:54:04: 792MHz 0.55 1% 0% 0% 0% 0% 0% 43.3°C 0/6 19:54:05: 792MHz 0.55 10% 7% 0% 1% 0% 1% 39.9°C 0/6 19:54:05: 792MHz 0.55 10% 8% 0% 1% 0% 1% 39.9°C 0/6 19:54:06: 792MHz 0.55 11% 8% 0% 1% 0% 1% 38.8°C 0/6 19:54:06: 792MHz 0.55 11% 9% 0% 1% 0% 1% 39.3°C 0/6 ### resolv.conf -rw-r--r-- 1 root root 54 Feb 6 21:22 /etc/resolv.conf # Generated by NetworkManager nameserver XXX.XXX.20.1 ### Current sysinfo: Linux 5.9.14-imx6 (cubox) 02/07/21 _armv7l_ (4 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.42 0.00 1.45 0.05 0.00 98.08 Device tps kB_read/s kB_wrtn/s kB_read kB_wrtn mmcblk1 0.10 3.83 0.34 310409 27228 mmcblk1p1 0.10 3.79 0.34 307273 27228 sda 1.73 836.56 6.34 67848514 513867 sda1 0.00 0.04 0.00 3144 0 sda2 0.00 0.04 0.00 3252 0 sda3 0.33 258.41 0.00 20958433 13 sda4 0.66 3.06 5.52 248577 447952 sda5 0.32 258.37 0.00 20955256 13 sda6 0.41 316.61 0.81 25678690 65888 md0 0.00 0.04 0.00 3161 4 zram0 0.03 0.05 0.06 4188 4508 zram1 0.03 0.12 0.28 9776 22872 zram2 0.00 0.00 0.00 0 0 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 3328 32752 144712 1512444 0 0 81 2 89 45 0 1 98 0 0 total used free shared buff/cache available Mem: 2.0Gi 360Mi 32Mi 26Mi 1.6Gi 1.6Gi Swap: 6.0Gi 3.0Mi 6.0Gi NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 5.7M 1.8M 2.2M 4 /var/log /dev/zram0 lzo-rle 1005.4M 2.9M 414.6K 948K 4 [SWAP] 19:54:07 up 22:31, 1 user, load average: 0.55, 0.14, 0.04 [ 3.107716] fbcon: Taking over console [ 3.606998] random: fast init done [ 3.836096] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.948911] vdd1p1: supplied by regulator-dummy [ 3.950628] vdd3p0: supplied by regulator-dummy [ 3.951942] vdd2p5: supplied by regulator-dummy [ 3.953682] vddarm: supplied by regulator-dummy [ 3.955264] vddpu: supplied by regulator-dummy [ 3.957923] vddsoc: supplied by regulator-dummy [ 4.027919] sdhci: Secure Digital Host Controller Interface driver [ 4.027926] sdhci: Copyright(c) Pierre Ossman [ 4.058608] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.071670] sdhci-esdhc-imx 2190000.mmc: allocated mmc-pwrseq [ 4.086655] pps pps0: new PPS source ptp0 [ 4.094954] libphy: fec_enet_mii_bus: probed [ 4.109125] i2c i2c-1: IMX I2C adapter registered [ 4.111616] i2c i2c-2: IMX I2C adapter registered [ 4.126318] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.139335] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 4.139398] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-04-16T05:27:58 UTC (9091678) [ 4.174754] imx_usb 2184000.usb: No over current polarity defined [ 4.185474] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 4.186209] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 4.194312] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.194933] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.202057] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.202569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.202585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.202594] usb usb1: Product: EHCI Host Controller [ 4.202603] usb usb1: Manufacturer: Linux 5.9.14-imx6 ehci_hcd [ 4.202611] usb usb1: SerialNumber: ci_hdrc.0 [ 4.203722] hub 1-0:1.0: USB hub found [ 4.203798] hub 1-0:1.0: 1 port detected [ 4.205907] imx_usb 2184200.usb: No over current polarity defined [ 4.210093] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.210522] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 4.214173] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 [ 4.214187] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 [ 4.214198] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 [ 4.214208] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.214311] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.214591] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.214753] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.218084] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.218200] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.218251] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.218280] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.218741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.218763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.218779] usb usb2: Product: EHCI Host Controller [ 4.218793] usb usb2: Manufacturer: Linux 5.9.14-imx6 ehci_hcd [ 4.218805] usb usb2: SerialNumber: ci_hdrc.1 [ 4.220551] hub 2-0:1.0: USB hub found [ 4.220742] hub 2-0:1.0: 1 port detected [ 4.230904] scsi host0: ahci-imx [ 4.231748] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 68 [ 4.336581] rtc-pcf8523 2-0068: registered as rtc1 [ 4.337457] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.339322] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 4.355247] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.357189] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.359081] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.362433] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.365795] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.373469] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.419434] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.420149] mmc0: new high speed SDIO card at address 0001 [ 4.421753] mmc1: new high speed SDHC card at address 59b4 [ 4.437786] mmcblk1: mmc1:59b4 EB2MW 29.8 GiB [ 4.443103] mmcblk1: p1 [ 13.983038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.983448] ata1.15: Port Multiplier 1.2, 0x197b:0x0562 r0, 2 ports, feat 0x5/0xf [ 13.989847] ata1.00: hard resetting link [ 14.427086] ata1.00: link resume succeeded after 1 retries [ 14.691394] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.691456] ata1.01: hard resetting link [ 15.731075] ata1.01: failed to resume link (SControl 0) [ 15.731499] ata1.01: SATA link down (SStatus 0 SControl 0) [ 15.732103] ata1.00: ATA-9: WDC WD121KRYZ-01W0RB0, 01.01H01, max UDMA/133 [ 15.732113] ata1.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 32) [ 15.736055] ata1.00: configured for UDMA/133 [ 15.736183] ata1: EH complete [ 15.737077] scsi 0:0:0:0: Direct-Access ATA WDC WD121KRYZ-01 1H01 PQ: 0 ANSI: 5 [ 15.738703] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.739524] sd 0:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 15.739539] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 15.739642] sd 0:0:0:0: [sda] Write Protect is off [ 15.739656] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.739841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.793729] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 15.798448] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.468444] md0: WARNING: sda5 appears to be on the same physical disk as sda3. [ 16.468455] True protection against single-disk failure might be compromised. [ 16.469312] md/raid1:md0: active with 2 out of 2 mirrors [ 16.469504] md0: detected capacity change from 0 to 21458059264 [ 16.898006] async_tx: api initialized (async) [ 17.283022] random: crng init done [ 17.430677] BTRFS: device fsid 6ada4766-740b-4df6-9f0b-e6ed894ece69 devid 1 transid 35324 /dev/sda6 scanned by btrfs (217) [ 17.717224] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 18.164393] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 18.853902] systemd[1]: System time before build time, advancing clock. [ 18.970649] systemd[1]: Inserted module 'autofs4' [ 19.047704] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.048655] systemd[1]: Detected architecture arm. [ 19.070233] systemd[1]: Set hostname to . [ 19.922805] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 19.963908] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 19.989748] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 20.049790] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please update the unit file accordingly. [ 20.240024] systemd[1]: Created slice system-serial-getty.slice. [ 20.244611] systemd[1]: Created slice system-getty.slice. [ 20.284937] systemd[1]: Listening on RPCbind Server Activation Socket. [ 20.687104] RPC: Registered named UNIX socket transport module. [ 20.687116] RPC: Registered udp transport module. [ 20.687121] RPC: Registered tcp transport module. [ 20.687126] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.751844] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 20.959937] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.137927] imx-ipuv3 2400000.ipu: IPUv3H probed [ 22.145663] imx-ipuv3 2800000.ipu: IPUv3H probed [ 22.187156] Registered IR keymap rc-empty [ 22.187307] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0 [ 22.191099] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 22.191342] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input1 [ 22.192149] mc: Linux media interface: v0.10 [ 22.241949] videodev: Linux video capture interface: v2.00 [ 22.335142] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 22.335441] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 22.335632] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 22.335796] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 22.336218] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 22.344300] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 22.347571] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 22.353178] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 22.521225] rc rc0: two consecutive events of type space [ 22.527489] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 22.528312] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 22.529019] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 22.529087] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 22.529788] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 22.530043] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 22.530057] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 22.531083] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 22.604953] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 22.650247] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 22.853488] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 22.853512] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 23.066797] caam 2100000.crypto: Entropy delay = 3200 [ 23.083587] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 23.127609] caam 2100000.crypto: Instantiated RNG4 SH0 [ 23.188363] caam 2100000.crypto: Instantiated RNG4 SH1 [ 23.188807] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 23.188828] caam 2100000.crypto: job rings = 2, qi = 0 [ 23.414744] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.419394] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.419567] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 23.419578] cfg80211: failed to load regulatory.db [ 23.563495] fsl-spdif-dai 2004000.spdif: Missing dma channel for stream: 0 [ 23.563512] fsl-spdif-dai 2004000.spdif: ASoC: error at snd_soc_pcm_component_new on 2004000.spdif: -22 [ 23.563520] S!PDIF PCM: ASoC: pcm S/PDIF PCM snd-soc-dummy-dai-0 constructor failed for dailink S/PDIF PCM: -22 [ 23.563530] imx-spdif sound-spdif: ASoC: can't create pcm S/PDIF PCM :-22 [ 23.563850] imx-spdif sound-spdif: snd_soc_register_card failed: -22 [ 23.563892] imx-spdif: probe of sound-spdif failed with error -22 [ 23.564944] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 23.565329] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.bin failed with error -2 [ 23.565760] usbcore: registered new interface driver brcmfmac [ 23.861942] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.872565] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.879353] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 23.881413] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 23.882428] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 23.884352] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 23.887918] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.890159] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 23.901919] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 23.905784] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 23.907140] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 23.908114] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 24.059422] systemd[1]: Started MD array monitor. [ 24.079337] systemd[1]: Mounting /data/mirror... [ 24.143614] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 24.208656] systemd[1]: Mounted /data/mirror. [ 24.459525] caam algorithms registered in /proc/crypto [ 24.476343] caam 2100000.crypto: registering rng-caam [ 24.567321] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 24.804323] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 2. [ 24.908082] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 4. [ 25.011943] systemd[1]: Found device WDC_WD121KRYZ-01W0RB0 6. [ 25.013218] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 25.013454] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 25.013536] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 25.021675] systemd[1]: Activating swap /dev/sda2... [ 25.072837] BTRFS info (device sda6): disk space caching is enabled [ 25.072849] BTRFS info (device sda6): has skinny extents [ 25.109237] Adding 5242876k swap on /dev/sda2. Priority:-2 extents:1 across:5242876k FS [ 25.154909] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 25.645758] zram: Added device: zram0 [ 25.647143] zram: Added device: zram1 [ 25.649660] zram: Added device: zram2 [ 25.841094] zram0: detected capacity change from 0 to 1054199808 [ 25.915053] Adding 1029488k swap on /dev/zram0. Priority:5 extents:1 across:1029488k SSFS [ 26.228879] zram1: detected capacity change from 0 to 52428800 [ 26.506034] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 26.506093] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 31.869060] systemd[1]: Started Armbian memory supported logging. [ 31.882380] systemd[1]: Starting Journal Service... [ 32.160389] systemd[1]: Started Journal Service. [ 32.261566] systemd-journald[652]: Received request to flush runtime journal from PID 1 [ 40.352550] Qualcomm Atheros AR8035 2188000.ethernet-1:00: attached PHY driver [Qualcomm Atheros AR8035] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL) [ 44.451022] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 44.451062] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 57.429076] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 57.450431] Bridge firewalling registered [ 58.848040] NFSD: Using UMH upcall client tracking operations. [ 58.848068] NFSD: starting 90-second grace period (net f0000029) [ 59.031198] fec 2188000.ethernet eth0: Link is Down [ 61.936038] docker0: port 1(veth75c04ec) entered blocking state [ 61.936057] docker0: port 1(veth75c04ec) entered disabled state [ 61.946070] device veth75c04ec entered promiscuous mode [ 62.075928] docker0: port 2(veth7e1f135) entered blocking state [ 62.075947] docker0: port 2(veth7e1f135) entered disabled state [ 62.083930] device veth7e1f135 entered promiscuous mode [ 62.095395] docker0: port 2(veth7e1f135) entered blocking state [ 62.095419] docker0: port 2(veth7e1f135) entered forwarding state [ 62.095805] docker0: port 2(veth7e1f135) entered disabled state [ 62.273190] docker0: port 3(veth99fae6d) entered blocking state [ 62.273299] docker0: port 3(veth99fae6d) entered disabled state [ 62.282575] device veth99fae6d entered promiscuous mode [ 62.301991] docker0: port 3(veth99fae6d) entered blocking state [ 62.302022] docker0: port 3(veth99fae6d) entered forwarding state [ 62.302440] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 62.303098] docker0: port 3(veth99fae6d) entered disabled state [ 62.881729] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 64.866648] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 66.865234] eth0: renamed from veth501bf61 [ 66.906042] IPv6: ADDRCONF(NETDEV_CHANGE): veth99fae6d: link becomes ready [ 66.906304] docker0: port 3(veth99fae6d) entered blocking state [ 66.906318] docker0: port 3(veth99fae6d) entered forwarding state [ 67.009603] eth0: renamed from veth0f0aab9 [ 67.062166] eth0: renamed from veth4e356bf [ 67.081394] IPv6: ADDRCONF(NETDEV_CHANGE): veth7e1f135: link becomes ready [ 67.081570] docker0: port 2(veth7e1f135) entered blocking state [ 67.081586] docker0: port 2(veth7e1f135) entered forwarding state [ 67.084455] IPv6: ADDRCONF(NETDEV_CHANGE): veth75c04ec: link becomes ready [ 67.084632] docker0: port 1(veth75c04ec) entered blocking state [ 67.084657] docker0: port 1(veth75c04ec) entered forwarding state [ 76.313086] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 76.313094] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [12877.783215] md: data-check of RAID array md0 [13488.203515] md: md0: data-check done. vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.compaction_proactiveness = 20 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirty_writeback_centisecs = 500 vm.dirtytime_expire_seconds = 43200 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3410 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.unprivileged_userfaultfd = 1 vm.user_reserve_kbytes = 63473 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 ### interrupts: CPU0 CPU1 CPU2 CPU3 16: 2919835 3641910 4148167 4046416 GIC-0 29 Edge twd 17: 1679 1447 1670 1865 GPC 55 Level i.MX Timer Tick 18: 0 0 0 0 GPC 94 Level arm-pmu 20: 0 0 0 0 GPC 115 Level 120000.hdmi, dw-hdmi-cec 21: 0 0 0 0 GPC 9 Level 130000.gpu 22: 0 0 0 0 GPC 10 Level 134000.gpu 24: 0 0 0 0 GPC 52 Level 2004000.spdif 25: 7 0 0 0 GPC 26 Level 2020000.serial 26: 0 0 0 0 GPC 50 Level 2034000.asrc 44: 0 0 0 0 GPC 80 Level 20bc000.watchdog 45: 0 0 0 0 GPC 49 Level imx_thermal 50: 0 0 0 0 GPC 19 Level rtc alarm 55: 0 0 0 0 GPC 2 Level sdma 56: 22 0 0 0 GPC 43 Level 2184000.usb 57: 678 0 0 0 GPC 40 Level 2184200.usb 58: 9194696 0 0 0 GPC 118 Level 2188000.ethernet 59: 0 0 0 0 GPC 119 Level 2188000.ethernet 60: 599 0 0 0 GPC 22 Level mmc0 61: 27117 0 0 0 GPC 23 Level mmc1 62: 0 0 0 0 GPC 37 Level 21a4000.i2c 63: 28 0 0 0 GPC 38 Level 21a8000.i2c 65: 0 0 0 0 GPC 29 Level 21f0000.serial 68: 163134 0 0 0 GPC 39 Level ahci-imx[2200000.sata] 69: 0 0 0 0 GPC 11 Level 2204000.gpu 76: 0 0 0 0 gpio-mxc 4 Edge 2194000.mmc cd 144: 0 0 0 0 gpio-mxc 8 Edge Button 0 145: 307 0 0 0 gpio-mxc 9 Edge gpio-ir-recv-irq 296: 0 0 0 0 IPU 23 Edge imx_drm 297: 0 0 0 0 IPU 28 Edge imx_drm 298: 0 0 0 0 IPU 23 Edge imx_drm 299: 0 0 0 0 IPU 28 Edge imx_drm 300: 12 0 0 0 GPC 105 Level 2101000.jr 301: 0 0 0 0 GPC 106 Level 2102000.jr IPI0: 0 0 0 0 CPU wakeup interrupts IPI1: 472 423 410 453 Timer broadcast interrupts IPI2: 170423 401676 408799 396775 Rescheduling interrupts IPI3: 550446 440286 331677 285573 Function call interrupts IPI4: 0 0 0 0 CPU stop interrupts IPI5: 413791 389191 452775 473928 IRQ work interrupts IPI6: 0 0 0 0 completion interrupts Err: 0