### Activated 4 lzo zram swap devices with 251 MB each ### Activated Armbian ramlog partition with zstd compression Mon Nov 12 10:52:56 UTC 2018 | Banana Pi R2 | 5.67 | armhf | armv7l | 4.19.1-mt7623 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.1-mt7623 (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP Mon Nov 12 11:49:12 CET 2018 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Bananapi BPI-R2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] [WMT-CONSYS-HW][W]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xffe00000, size: 0x100000 [ 0.000000] OF: reserved mem: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524031 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327423 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x490 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41996 r8192 d23540 u73728 [ 0.000000] pcpu-alloc: s41996 r8192 d23540 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522303 [ 0.000000] Kernel command line: console=ttyS2,115200n1 root=UUID=340428b0-bf8a-4647-8e4e-504203322e72 rw rootfstype=ext4 rootwait audit=0 loglevel=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1987340K/2096124K available (12288K kernel code, 827K rwdata, 3624K rodata, 1024K init, 594K bss, 43248K reserved, 65536K cma-reserved, 1244156K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (13280 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 828 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 595 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000005] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000013] Switching to timer-based delay loop, resolution 76ns [ 0.000197] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000208] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000670] Console: colour dummy device 80x30 [ 0.000709] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) [ 0.000718] pid_max: default: 32768 minimum: 301 [ 0.000873] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000884] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001544] CPU: Testing write buffer coherency: ok [ 0.001893] CPU0: update cpu_capacity 1024 [ 0.001901] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002455] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.002585] rcu: Hierarchical SRCU implementation. [ 0.003560] EFI services will not be available. [ 0.003806] smp: Bringing up secondary CPUs ... [ 0.004376] CPU1: update cpu_capacity 1024 [ 0.004383] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004996] CPU2: update cpu_capacity 1024 [ 0.005002] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.005557] CPU3: update cpu_capacity 1024 [ 0.005563] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.005658] smp: Brought up 1 node, 4 CPUs [ 0.005666] SMP: Total of 4 processors activated (104.00 BogoMIPS). [ 0.005670] CPU: All CPU(s) started in SVC mode. [ 0.006689] devtmpfs: initialized [ 0.012673] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 0.012899] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.012914] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.015254] xor: measuring software checksum speed [ 0.052128] arm4regs : 1302.000 MB/sec [ 0.092183] 8regs : 794.000 MB/sec [ 0.132245] 32regs : 878.000 MB/sec [ 0.172299] neon : 1324.000 MB/sec [ 0.172303] xor: using function: neon (1324.000 MB/sec) [ 0.172318] pinctrl core: initialized pinctrl subsystem [ 0.172657] regulator-dummy: no parameters [ 0.173065] DMI not present or invalid. [ 0.173529] NET: Registered protocol family 16 [ 0.175332] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.176611] cpuidle: using governor ladder [ 0.176643] cpuidle: using governor menu [ 0.176853] No ATAGs? [ 0.176971] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.176976] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.316786] raid6: int32x1 gen() 177 MB/s [ 0.384682] raid6: int32x1 xor() 163 MB/s [ 0.452908] raid6: int32x2 gen() 210 MB/s [ 0.520910] raid6: int32x2 xor() 172 MB/s [ 0.589155] raid6: int32x4 gen() 234 MB/s [ 0.657095] raid6: int32x4 xor() 179 MB/s [ 0.725295] raid6: int32x8 gen() 234 MB/s [ 0.793237] raid6: int32x8 xor() 148 MB/s [ 0.861354] raid6: neonx1 gen() 510 MB/s [ 0.929340] raid6: neonx1 xor() 475 MB/s [ 0.997480] raid6: neonx2 gen() 684 MB/s [ 1.065518] raid6: neonx2 xor() 614 MB/s [ 1.133604] raid6: neonx4 gen() 825 MB/s [ 1.201668] raid6: neonx4 xor() 692 MB/s [ 1.269817] raid6: neonx8 gen() 730 MB/s [ 1.337856] raid6: neonx8 xor() 631 MB/s [ 1.337861] raid6: using algorithm neonx4 gen() 825 MB/s [ 1.337864] raid6: .... xor() 692 MB/s, rmw enabled [ 1.337867] raid6: using neon recovery algorithm [ 1.338265] fixed-1.8V: 1800 mV [ 1.338410] reg-fixed-voltage regulator-1p8v: fixed-1.8V supplying 1800000uV [ 1.338509] fixed-3.3V: 3300 mV [ 1.338631] reg-fixed-voltage regulator-3p3v: fixed-3.3V supplying 3300000uV [ 1.338719] fixed-5V: 5000 mV [ 1.338839] reg-fixed-voltage regulator-5v: fixed-5V supplying 5000000uV [ 1.339209] vgaarb: loaded [ 1.339540] SCSI subsystem initialized [ 1.339763] libata version 3.00 loaded. [ 1.339959] usbcore: registered new interface driver usbfs [ 1.340005] usbcore: registered new interface driver hub [ 1.340079] usbcore: registered new device driver usb [ 1.340134] pps_core: LinuxPPS API ver. 1 registered [ 1.340138] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.340152] PTP clock support registered [ 1.340521] EDAC MC: Ver: 3.0.0 [ 1.341491] Bluetooth: Core ver 2.22 [ 1.341543] NET: Registered protocol family 31 [ 1.341547] Bluetooth: HCI device and connection manager initialized [ 1.341557] Bluetooth: HCI socket layer initialized [ 1.341563] Bluetooth: L2CAP socket layer initialized [ 1.341588] Bluetooth: SCO socket layer initialized [ 1.342223] clocksource: Switched to clocksource arch_sys_counter [ 1.417790] NET: Registered protocol family 2 [ 1.418496] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.418523] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.418605] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.418713] TCP: Hash tables configured (established 8192 bind 8192) [ 1.418818] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.418862] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.419065] NET: Registered protocol family 1 [ 1.419614] RPC: Registered named UNIX socket transport module. [ 1.419620] RPC: Registered udp transport module. [ 1.419623] RPC: Registered tcp transport module. [ 1.419626] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.420161] PCI: CLS 0 bytes, default 64 [ 1.420359] Trying to unpack rootfs image as initramfs... [ 1.688094] Freeing initrd memory: 4768K [ 1.689635] Initialise system trusted keyrings [ 1.689874] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.695132] zbud: loaded [ 1.696402] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.697064] NFS: Registering the id_resolver key type [ 1.697093] Key type id_resolver registered [ 1.697097] Key type id_legacy registered [ 1.697108] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.697137] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.697438] fuse init (API version 7.27) [ 1.697840] pstore: using deflate compression [ 1.702820] async_tx: api initialized (async) [ 1.702833] Key type asymmetric registered [ 1.702838] Asymmetric key parser 'x509' registered [ 1.702893] bounce: pool size: 64 pages [ 1.702942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.703110] io scheduler noop registered [ 1.703117] io scheduler deadline registered [ 1.703280] io scheduler cfq registered (default) [ 1.703285] io scheduler mq-deadline registered [ 1.703288] io scheduler kyber registered [ 1.703477] io scheduler bfq registered [ 1.704320] phy phy-1a149000.pcie-phy.0: Looking up phy-supply from device tree [ 1.704336] phy phy-1a149000.pcie-phy.0: Looking up phy-supply property in node /pcie-phy@1a149000/pcie-phy@1a149900 failed [ 1.704555] phy phy-1a14a000.pcie-phy.1: Looking up phy-supply from device tree [ 1.704565] phy phy-1a14a000.pcie-phy.1: Looking up phy-supply property in node /pcie-phy@1a14a000/pcie-phy@1a14a900 failed [ 1.704723] phy phy-1a1c4000.usb-phy.2: Looking up phy-supply from device tree [ 1.704733] phy phy-1a1c4000.usb-phy.2: Looking up phy-supply property in node /usb-phy@1a1c4000/usb-phy@1a1c4800 failed [ 1.704832] phy phy-1a1c4000.usb-phy.3: Looking up phy-supply from device tree [ 1.704841] phy phy-1a1c4000.usb-phy.3: Looking up phy-supply property in node /usb-phy@1a1c4000/usb-phy@1a1c4900 failed [ 1.705003] phy phy-1a244000.usb-phy.4: Looking up phy-supply from device tree [ 1.705013] phy phy-1a244000.usb-phy.4: Looking up phy-supply property in node /usb-phy@1a244000/usb-phy@1a244800 failed [ 1.705095] phy phy-1a244000.usb-phy.5: Looking up phy-supply from device tree [ 1.705104] phy phy-1a244000.usb-phy.5: Looking up phy-supply property in node /usb-phy@1a244000/usb-phy@1a244900 failed [ 1.715034] mtk-scpsys 10006000.scpsys: Looking up conn-supply from device tree [ 1.715048] mtk-scpsys 10006000.scpsys: Looking up conn-supply property in node /scpsys@10006000 failed [ 1.715061] mtk-scpsys 10006000.scpsys: Looking up disp-supply from device tree [ 1.715069] mtk-scpsys 10006000.scpsys: Looking up disp-supply property in node /scpsys@10006000 failed [ 1.715077] mtk-scpsys 10006000.scpsys: Looking up mfg-supply from device tree [ 1.715084] mtk-scpsys 10006000.scpsys: Looking up mfg-supply property in node /scpsys@10006000 failed [ 1.715092] mtk-scpsys 10006000.scpsys: Looking up vdec-supply from device tree [ 1.715100] mtk-scpsys 10006000.scpsys: Looking up vdec-supply property in node /scpsys@10006000 failed [ 1.715107] mtk-scpsys 10006000.scpsys: Looking up isp-supply from device tree [ 1.715115] mtk-scpsys 10006000.scpsys: Looking up isp-supply property in node /scpsys@10006000 failed [ 1.715122] mtk-scpsys 10006000.scpsys: Looking up bdp-supply from device tree [ 1.715129] mtk-scpsys 10006000.scpsys: Looking up bdp-supply property in node /scpsys@10006000 failed [ 1.715137] mtk-scpsys 10006000.scpsys: Looking up eth-supply from device tree [ 1.715144] mtk-scpsys 10006000.scpsys: Looking up eth-supply property in node /scpsys@10006000 failed [ 1.715151] mtk-scpsys 10006000.scpsys: Looking up hif-supply from device tree [ 1.715159] mtk-scpsys 10006000.scpsys: Looking up hif-supply property in node /scpsys@10006000 failed [ 1.715166] mtk-scpsys 10006000.scpsys: Looking up ifr_msc-supply from device tree [ 1.715173] mtk-scpsys 10006000.scpsys: Looking up ifr_msc-supply property in node /scpsys@10006000 failed [ 1.761242] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.783395] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 195, base_baud = 1625000) is a ST16650V2 [ 1.804416] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 196, base_baud = 1625000) is a ST16650V2 [ 1.825370] 11004000.serial: ttyS2 at MMIO 0x11004000 (irq = 197, base_baud = 1625000) is a ST16650V2 [ 1.825444] console [ttyS2] enabled [ 1.826684] 1100c000.serial: ttyS3 at MMIO 0x1100c000 (irq = 202, base_baud = 17062500) is a MediaTek BTIF [ 1.827131] STMicroelectronics ASC driver initialized [ 1.827993] mtk_rng 1020f000.rng: registered RNG driver [ 1.828154] random: fast init done [ 1.828367] random: crng init done [ 1.832611] brd: module loaded [ 1.840424] loop: module loaded [ 1.840687] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success [ 1.840717] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0 [ 1.842835] mt6323-regulator mt6323-regulator: Chip ID = 0x2023 [ 1.842909] vproc: 700 <--> 1350 mV at 1150 mV [ 1.843137] vsys: 1400 <--> 2987 mV at 2200 mV [ 1.843294] vpa: 500 <--> 3650 mV at 1000 mV [ 1.843687] vtcxo: 2800 mV [ 1.843853] vcn28: 2800 mV [ 1.843997] vcn33_bt: 3300 <--> 3600 mV at 3600 mV [ 1.844151] vcn33_wifi: 3300 <--> 3600 mV at 3600 mV [ 1.844638] va: 2800 mV [ 1.844817] vcama: 1500 <--> 2800 mV at 2800 mV [ 1.845328] vio28: 2800 mV [ 1.845830] vusb: 3300 mV [ 1.846143] vmc: 1800 <--> 3300 mV at 3300 mV [ 1.846528] vmch: 3000 <--> 3300 mV at 3300 mV [ 1.846887] vemc3v3: 3000 <--> 3300 mV at 3300 mV [ 1.847064] vgp1: 1200 <--> 3300 mV at 2800 mV [ 1.847231] vgp2: 1200 <--> 3000 mV at 2500 mV [ 1.847397] vgp3: 1200 <--> 1800 mV at 1200 mV [ 1.847558] vcn18: 1800 mV [ 1.847711] vsim1: 1800 <--> 3000 mV at 1800 mV [ 1.847894] vsim2: 1800 <--> 3000 mV at 1800 mV [ 1.848069] vrtc: 2800 mV [ 1.848229] vcamaf: 1200 <--> 3300 mV at 3300 mV [ 1.848402] vibr: 1200 <--> 3300 mV at 1200 mV [ 1.848561] vrf18: 1825 mV [ 1.849109] vm: 1200 <--> 1800 mV at 1500 mV [ 1.849657] vio18: 1800 mV [ 1.849848] vcamd: 1200 <--> 1800 mV at 1200 mV [ 1.850021] vcamio: 1800 mV [ 1.851020] Uniform Multi-Platform E-IDE driver [ 1.851088] ide-gd driver 1.18 [ 1.852939] libphy: Fixed MDIO Bus: probed [ 1.875939] libphy: mdio: probed [ 1.876055] mtk_soc_eth 1b100000.ethernet: generated random MAC address 7e:ef:a2:c5:7c:4d [ 1.880139] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 1.880593] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xf08c0000, irq 213 [ 1.881064] xhci-mtk 1a1c0000.usb: Looking up vbus-supply from device tree [ 1.881131] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.3 [ 1.881138] xhci-mtk 1a1c0000.usb: Looking up vusb33-supply from device tree [ 1.881194] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.2 [ 1.881476] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 1.881525] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1 [ 1.884848] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 1.884908] xhci-mtk 1a1c0000.usb: irq 210, io mem 0x1a1c0000 [ 1.885832] hub 1-0:1.0: USB hub found [ 1.885879] hub 1-0:1.0: 1 port detected [ 1.886280] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 1.886298] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2 [ 1.886313] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed [ 1.886410] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.887010] hub 2-0:1.0: USB hub found [ 1.887061] hub 2-0:1.0: 1 port detected [ 1.887497] xhci-mtk 1a240000.usb: Looking up vbus-supply from device tree [ 1.887567] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.3 [ 1.887574] xhci-mtk 1a240000.usb: Looking up vusb33-supply from device tree [ 1.887639] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.2 [ 1.887887] xhci-mtk 1a240000.usb: xHCI Host Controller [ 1.887921] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3 [ 1.891130] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 1.891186] xhci-mtk 1a240000.usb: irq 211, io mem 0x1a240000 [ 1.892057] hub 3-0:1.0: USB hub found [ 1.892104] hub 3-0:1.0: 1 port detected [ 1.892459] xhci-mtk 1a240000.usb: xHCI Host Controller [ 1.892475] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4 [ 1.892496] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed [ 1.892585] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.893186] hub 4-0:1.0: USB hub found [ 1.893229] hub 4-0:1.0: 1 port detected [ 1.893789] usbcore: registered new interface driver usb-storage [ 1.894558] mt6397-rtc mt6323-rtc: registered as rtc0 [ 1.894746] i2c /dev entries driver [ 1.895996] MTK_WDT_NONRST_REG(0) [ 1.896647] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.898403] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.898737] device-mapper: multipath round-robin: version 1.2.0 loaded [ 1.898743] device-mapper: multipath queue-length: version 0.2.0 loaded [ 1.898747] device-mapper: multipath service-time: version 0.3.0 loaded [ 1.898804] device-mapper: raid: Loading target version 1.14.0 [ 1.899240] cpu cpu0: Looking up proc-supply from device tree [ 1.899328] cpu cpu0: Linked as a consumer to regulator.4 [ 1.899334] cpu cpu0: Looking up sram-supply from device tree [ 1.899346] cpu cpu0: Looking up sram-supply property in node /cpus/cpu@0 failed [ 1.899378] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.901213] mtk-msdc 11230000.mmc: Looking up vmmc-supply from device tree [ 1.901298] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.2 [ 1.901306] mtk-msdc 11230000.mmc: Looking up vqmmc-supply from device tree [ 1.901372] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.1 [ 1.929505] mtk-msdc 11240000.mmc: Got CD GPIO [ 1.929769] mtk-msdc 11240000.mmc: Looking up vmmc-supply from device tree [ 1.930021] mtk-msdc 11240000.mmc: Linked as a consumer to regulator.2 [ 1.930057] mtk-msdc 11240000.mmc: Looking up vqmmc-supply from device tree [ 1.965098] ledtrig-cpu: registered to indicate activity on CPUs [ 1.967488] hidraw: raw HID events driver (C) Jiri Kosina [ 1.967625] usbcore: registered new interface driver usbhid [ 1.967628] usbhid: USB HID core driver [ 1.968398] Initializing XFRM netlink socket [ 1.968924] NET: Registered protocol family 10 [ 1.978736] mmc0: new high speed MMC card at address 0001 [ 1.981570] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB [ 1.984266] mmcblk0boot0: mmc0:0001 8WPD3R partition 1 4.00 MiB [ 1.987138] mmcblk0boot1: mmc0:0001 8WPD3R partition 2 4.00 MiB [ 1.987443] mmcblk0rpmb: mmc0:0001 8WPD3R partition 3 512 KiB, chardev (241:0) [ 1.988977] mmcblk0: p1 [ 1.993530] Segment Routing with IPv6 [ 1.993609] NET: Registered protocol family 17 [ 1.993631] NET: Registered protocol family 15 [ 1.993691] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.993729] 8021q: 802.1Q VLAN Support v1.8 [ 1.993949] Key type dns_resolver registered [ 1.994128] ThumbEE CPU extension supported. [ 1.994138] Registering SWP/SWPB emulation handler [ 1.994781] Loading compiled-in X.509 certificates [ 1.994865] zswap: loaded using pool lzo/zbud [ 1.996262] Btrfs loaded, crc32c=crc32c-generic [ 1.999189] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.001441] mmc1: new high speed SDHC card at address 0001 [ 2.003476] mmcblk1: mmc1:0001 EB1QT 29.8 GiB [ 2.004759] mmcblk1: p1 [ 2.113944] mtk-pcie 1a140000.pcie: Port0 link down [ 2.144464] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00 [ 2.144482] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff]) [ 2.144492] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 2.144502] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.144688] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400 [ 2.144728] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 2.144800] pci 0000:00:01.0: supports D1 [ 2.144808] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 2.147567] PCI: bus0: Fast back to back transfers disabled [ 2.147585] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.147779] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185 [ 2.147820] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.147829] pci 0000:01:00.0: reg 0x10: [io size 0x0008] [ 2.147846] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 2.147854] pci 0000:01:00.0: reg 0x14: [io size 0x0004] [ 2.147870] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 2.147878] pci 0000:01:00.0: reg 0x18: [io size 0x0008] [ 2.147893] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid [ 2.147901] pci 0000:01:00.0: reg 0x1c: [io size 0x0004] [ 2.147917] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid [ 2.147925] pci 0000:01:00.0: reg 0x20: [io size 0x0010] [ 2.147941] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 2.147958] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.148077] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ 2.160062] PCI: bus1: Fast back to back transfers disabled [ 2.160078] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.160119] pci 0000:00:01.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 2.160128] pci 0000:00:01.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 2.160135] pci 0000:00:01.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] [ 2.160145] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.160158] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] [ 2.160165] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff] [ 2.160176] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x100f] [ 2.160186] pci 0000:01:00.0: BAR 0: assigned [io 0x1010-0x1017] [ 2.160196] pci 0000:01:00.0: BAR 2: assigned [io 0x1018-0x101f] [ 2.160207] pci 0000:01:00.0: BAR 1: assigned [io 0x1020-0x1023] [ 2.160217] pci 0000:01:00.0: BAR 3: assigned [io 0x1024-0x1027] [ 2.160227] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.160235] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 2.160243] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff] [ 2.160251] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff pref] [ 2.160462] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 2.160689] ahci 0000:01:00.0: version 3.0 [ 2.160708] ahci 0000:01:00.0: enabling device (0140 -> 0143) [ 2.160819] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 2.160869] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.160879] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.164085] scsi host0: ahci [ 2.165416] scsi host1: ahci [ 2.166049] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 226 [ 2.166065] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 226 [ 2.166730] mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property [ 2.167356] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered [ 2.170640] mt6397-rtc mt6323-rtc: setting system clock to 2010-01-01 00:00:08 UTC (1262304008) [ 2.170820] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.180795] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.181457] vpa: disabling [ 2.181496] vusb: disabling [ 2.181513] vmc: disabling [ 2.181526] vmch: disabling [ 2.181539] vemc3v3: disabling [ 2.181553] vgp1: disabling [ 2.181590] vcamaf: disabling [ 2.182388] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.182400] cfg80211: failed to load regulatory.db [ 2.478358] ata1: SATA link down (SStatus 0 SControl 300) [ 2.790338] ata2: SATA link down (SStatus 0 SControl 300) [ 2.801769] Freeing unused kernel memory: 1024K [ 2.804799] Run /init as init process [ 3.246572] mt7530 mdio-bus:00: Looking up core-supply from device tree [ 3.246679] mt7530 mdio-bus:00: Linked as a consumer to regulator.6 [ 3.246694] mt7530 mdio-bus:00: Looking up io-supply from device tree [ 3.246832] mt7530 mdio-bus:00: Linked as a consumer to regulator.17 [ 3.443564] libphy: dsa slave smi: probed [ 3.444445] mt7530 mdio-bus:00 wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 3.445967] mt7530 mdio-bus:00 lan0 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 3.447597] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 3.449123] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 3.451529] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] [ 3.466025] DSA: tree 0 setup [ 4.024678] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 4.605642] systemd[1]: System time before build time, advancing clock. [ 4.657598] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.658453] systemd[1]: Detected architecture arm. [ 4.676456] systemd[1]: Set hostname to . [ 5.104295] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.124066] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.143598] systemd[1]: Reached target Remote File Systems. [ 5.164898] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.190225] systemd[1]: Created slice System Slice. [ 5.213906] systemd[1]: Mounting Debug File System... [ 5.228030] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.476943] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.117819] systemd-journald[255]: Received request to flush runtime journal from PID 1 [ 6.513943] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values [ 6.519783] Registered IR keymap rc-empty [ 6.519916] rc rc0: mtk_cir as /devices/platform/10013000.cir/rc/rc0 [ 6.520130] input: mtk_cir as /devices/platform/10013000.cir/rc/rc0/input0 [ 6.520400] rc rc0: lirc_dev: driver mtk_cir registered at minor = 0, raw IR receiver, no transmitter [ 6.531128] mtk_cir 10013000.cir: Initialized MT7623 IR driver, sample period = 46us [ 6.646580] zram: Added device: zram0 [ 6.650508] zram: Added device: zram1 [ 6.658577] zram: Added device: zram2 [ 6.659355] zram: Added device: zram3 [ 6.660051] zram: Added device: zram4 [ 6.660897] zram: Added device: zram5 [ 6.722346] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 6.878032] zram1: detected capacity change from 0 to 263512064 [ 6.979872] Adding 257332k swap on /dev/zram1. Priority:5 extents:1 across:257332k SSFS [ 6.991356] zram2: detected capacity change from 0 to 263512064 [ 7.060159] Adding 257332k swap on /dev/zram2. Priority:5 extents:1 across:257332k SSFS [ 7.062702] zram3: detected capacity change from 0 to 263512064 [ 7.116919] Adding 257332k swap on /dev/zram3. Priority:5 extents:1 across:257332k SSFS [ 7.123700] zram4: detected capacity change from 0 to 263512064 [ 7.153384] Adding 257332k swap on /dev/zram4. Priority:5 extents:1 across:257332k SSFS [ 7.381944] zram0: detected capacity change from 0 to 52428800 [ 8.055293] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=bananapir2 BOARD_NAME="Banana Pi R2" BOARDFAMILY=mt7623 VERSION=5.67 LINUXFAMILY=mt7623 BRANCH=default ARCH=arm IMAGE_TYPE=user-built BOARD_TYPE=csc INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage ### boot environment: verbosity=1 rootdev=UUID=340428b0-bf8a-4647-8e4e-504203322e72 rootfstype=ext4 ### lsusb: Mon Nov 12 10:52:56 UTC 2018 | Banana Pi R2 | 5.67 | armhf | armv7l | 4.19.1-mt7623 ### [resize2fs] Leaving 1 percent spare area. Start resizing partition /dev/mmcblk1p1 now: major minor #blocks name 1 0 4096 ram0 1 1 4096 ram1 1 2 4096 ram2 1 3 4096 ram3 179 0 7634944 mmcblk0 179 1 7554496 mmcblk0p1 179 48 31260672 mmcblk1 179 49 1126400 mmcblk1p1 252 0 51200 zram0 252 1 257336 zram1 252 2 257336 zram2 252 3 257336 zram3 252 4 257336 zram4 Executing fdisk, fsck and partprobe: Welcome to fdisk (util-linux 2.29.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): Selected partition 1 Partition 1 has been deleted. Command (m for help): Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p): Partition number (1-4, default 1): First sector (2048-62521343, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (8192-62521343, default 62521343): Created a new partition 1 of type 'Linux' and of size 29.5 GiB. Partition #1 contains a ext4 signature. Command (m for help): The partition table has been altered. Calling ioctl() to re-read partition table. Re-reading the partition table failed.: Device or resource busy The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8). New partition table: major minor #blocks name 1 0 4096 ram0 1 1 4096 ram1 1 2 4096 ram2 1 3 4096 ram3 179 0 7634944 mmcblk0 179 1 7554496 mmcblk0p1 179 48 31260672 mmcblk1 179 49 30943968 mmcblk1p1 252 0 51200 zram0 252 1 257336 zram1 252 2 257336 zram2 252 3 257336 zram3 252 4 257336 zram4 Now trying to resize ext4 filesystem on /dev/mmcblk1p1 to the limits: resize2fs 1.43.4 (31-Jan-2017) Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Model: 3 Model name: ARMv7 Processor rev 3 (v7l) CPU max MHz: 1300.0000 CPU min MHz: 98.0000 BogoMIPS: 32.50 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 Hardware : Mediatek Cortex-A7 (Device Tree) Revision : 0000 Serial : 0000000000000000 ### meminfo: MemTotal: 2058668 kB MemFree: 1946500 kB MemAvailable: 1926024 kB Buffers: 5704 kB Cached: 25644 kB SwapCached: 0 kB Active: 24220 kB Inactive: 13868 kB Active(anon): 6688 kB Inactive(anon): 3832 kB Active(file): 17532 kB Inactive(file): 10036 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1309692 kB HighFree: 1263064 kB LowTotal: 748976 kB LowFree: 683436 kB SwapTotal: 1029328 kB SwapFree: 1029328 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 6672 kB Mapped: 6784 kB Shmem: 3924 kB Slab: 22580 kB SReclaimable: 11240 kB SUnreclaim: 11340 kB KernelStack: 856 kB PageTables: 224 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2058660 kB Committed_AS: 15164 kB VmallocTotal: 245760 kB VmallocUsed: 0 kB VmallocChunk: 0 kB Percpu: 432 kB CmaTotal: 65536 kB CmaFree: 64888 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.drop_caches = 0 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3448 vm.mmap_min_addr = 4096 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 64026 vm.vfs_cache_pressure = 100 vm.watermark_scale_factor = 10 ### ip addr: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 7e:ef:a2:c5:7c:4d brd ff:ff:ff:ff:ff:ff 3: wan@eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 7e:ef:a2:c5:7c:4d brd ff:ff:ff:ff:ff:ff 4: lan0@eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 7e:ef:a2:c5:7c:4d brd ff:ff:ff:ff:ff:ff 5: lan1@eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 7e:ef:a2:c5:7c:4d brd ff:ff:ff:ff:ff:ff 6: lan2@eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 7e:ef:a2:c5:7c:4d brd ff:ff:ff:ff:ff:ff 7: lan3@eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 7e:ef:a2:c5:7c:4d brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 7634944 mmcblk0 179 1 7554496 mmcblk0p1 179 48 31260672 mmcblk1 179 49 30943968 mmcblk1p1 252 0 51200 zram0 252 1 257336 zram1 252 2 257336 zram2 252 3 257336 zram3 252 4 257336 zram4 ### df: udev 971M 0 971M 0% /dev tmpfs 202M 3.9M 198M 2% /run /dev/mmcblk1p1 2.0G 947M 993M 49% / tmpfs 1006M 0 1006M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 1006M 0 1006M 0% /sys/fs/cgroup tmpfs 1006M 4.0K 1006M 1% /tmp /dev/zram0 49M 572K 45M 2% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 7.3G └─mmcblk0p1 ext4 7.2G 06af92fd-e7d3-45c5-852d-94abb4608acd mmcblk0boot0 4M mmcblk0boot1 4M mmcblk1 29.8G └─mmcblk1p1 ext4 29.5G / 340428b0-bf8a-4647-8e4e-504203322e72 zram0 50M /var/log ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 50M 648K 102.8K 416K 4 /var/log /dev/zram1 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram2 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram3 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram4 lzo 251.3M 4K 78B 12K 4 [SWAP] ### mtab: /dev/mmcblk1p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/zram0 /var/log ext4 rw,relatime,block_validity,discard,delalloc,nojournal_checksum,barrier,user_xattr,acl 0 0 ### mmc0:0001 info: manfid: 0x000015 cid: 150100385750443352002b8deebb8415 fwrev: 0x0000000000000000 rca: 0x0001 csd: d02701320f5903fff6dbffef8e40400d life_time: 0x01 0x01 ocr: 0x00200000 type: MMC enhanced_area_offset: 18446744073709551594 date: 08/2017 hwrev: 0x0 prv: 0x0 dsr: 0x404 ffu_capable: 1 serial: 0x2b8deebb raw_rpmb_size_mult: 0x4 erase_size: 524288 pre_eol_info: 0x01 rel_sectors: 0x1 cmdq_en: 0 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8WPD3R MODALIAS=mmc:block enhanced_area_size: 4294967274 oemid: 0x0100 rev: 0x7 preferred_erase_size: 4194304 name: 8WPD3R ### mmc1:0001 info: manfid: 0x00001b cid: 1b534d45423151543010185fe6012421 fwrev: 0x0 rca: 0x0001 csd: 400e00325b590000ee7f7f800a404055 ocr: 0x00200000 type: SD date: 04/2018 hwrev: 0x3 dsr: 0x404 serial: 0x10185fe6 erase_size: 512 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=EB1QT MODALIAS=mmc:block ssr: 0000000005000000040090000f051c00001800000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5800200000000 oemid: 0x534d preferred_erase_size: 4194304 name: EB1QT ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 10:53:00: 1300MHz 0.23 52% 23% 18% 0% 10% 0% 26.1°C 0/7 10:53:00: 1300MHz 0.23 35% 3% 0% 0% 30% 0% 26.0°C 0/7 10:53:01: 1300MHz 0.23 31% 5% 0% 1% 24% 0% 26.2°C 0/7 10:53:01: 1300MHz 0.23 30% 5% 0% 1% 23% 0% 26.0°C 0/7 10:53:01: 1300MHz 0.23 29% 4% 0% 1% 23% 0% 26.0°C 0/7 Filesystem at /dev/mmcblk1p1 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 2 The filesystem on /dev/mmcblk1p1 is now 7735992 (4k) blocks long. ### [resize2fs] Start resizing ext4 partition /dev/mmcblk1p1 now resize2fs 1.43.4 (31-Jan-2017) The filesystem is already 7735992 (4k) blocks long. Nothing to do! ### quick iozone test: 4 2266 2790 6942 8253 8217 3917 ### [firstrun] Recreated SSH keys (entropy: 2448 2455) ### Activated 4 lzo zram swap devices with 251 MB each ### Activated Armbian ramlog partition with zstd compression Mon Nov 12 11:32:14 UTC 2018 | Banana Pi R2 | 5.67 | armhf | armv7l | 4.19.1-mt7623 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.1-mt7623 (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP Mon Nov 12 11:49:12 CET 2018 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Bananapi BPI-R2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] [WMT-CONSYS-HW][W]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xffe00000, size: 0x100000 [ 0.000000] OF: reserved mem: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524031 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327423 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x490 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41996 r8192 d23540 u73728 [ 0.000000] pcpu-alloc: s41996 r8192 d23540 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522303 [ 0.000000] Kernel command line: console=ttyS2,115200n1 root=UUID=c4a97a53-fd1c-4777-afcb-abbfad41afbc rw rootfstype=ext4 rootwait audit=0 loglevel=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1987340K/2096124K available (12288K kernel code, 827K rwdata, 3624K rodata, 1024K init, 594K bss, 43248K reserved, 65536K cma-reserved, 1244156K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (13280 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 828 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 595 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000006] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000013] Switching to timer-based delay loop, resolution 76ns [ 0.000195] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000207] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000672] Console: colour dummy device 80x30 [ 0.000710] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) [ 0.000720] pid_max: default: 32768 minimum: 301 [ 0.000876] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000886] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001550] CPU: Testing write buffer coherency: ok [ 0.001901] CPU0: update cpu_capacity 1024 [ 0.001909] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002462] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.002590] rcu: Hierarchical SRCU implementation. [ 0.003567] EFI services will not be available. [ 0.003818] smp: Bringing up secondary CPUs ... [ 0.004385] CPU1: update cpu_capacity 1024 [ 0.004391] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004996] CPU2: update cpu_capacity 1024 [ 0.005003] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.005568] CPU3: update cpu_capacity 1024 [ 0.005574] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.005668] smp: Brought up 1 node, 4 CPUs [ 0.005676] SMP: Total of 4 processors activated (104.00 BogoMIPS). [ 0.005680] CPU: All CPU(s) started in SVC mode. [ 0.006700] devtmpfs: initialized [ 0.012682] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 0.012909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.012924] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.015261] xor: measuring software checksum speed [ 0.052130] arm4regs : 1302.000 MB/sec [ 0.092185] 8regs : 794.000 MB/sec [ 0.132246] 32regs : 878.000 MB/sec [ 0.172300] neon : 1324.000 MB/sec [ 0.172304] xor: using function: neon (1324.000 MB/sec) [ 0.172320] pinctrl core: initialized pinctrl subsystem [ 0.172657] regulator-dummy: no parameters [ 0.173072] DMI not present or invalid. [ 0.173538] NET: Registered protocol family 16 [ 0.175349] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.176629] cpuidle: using governor ladder [ 0.176660] cpuidle: using governor menu [ 0.176868] No ATAGs? [ 0.176983] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.176988] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.316787] raid6: int32x1 gen() 177 MB/s [ 0.384679] raid6: int32x1 xor() 163 MB/s [ 0.452919] raid6: int32x2 gen() 210 MB/s [ 0.520939] raid6: int32x2 xor() 172 MB/s [ 0.589162] raid6: int32x4 gen() 234 MB/s [ 0.657078] raid6: int32x4 xor() 179 MB/s [ 0.725296] raid6: int32x8 gen() 234 MB/s [ 0.793237] raid6: int32x8 xor() 148 MB/s [ 0.861362] raid6: neonx1 gen() 510 MB/s [ 0.929346] raid6: neonx1 xor() 475 MB/s [ 0.997478] raid6: neonx2 gen() 684 MB/s [ 1.065518] raid6: neonx2 xor() 614 MB/s [ 1.133610] raid6: neonx4 gen() 825 MB/s [ 1.201714] raid6: neonx4 xor() 693 MB/s [ 1.269844] raid6: neonx8 gen() 730 MB/s [ 1.337863] raid6: neonx8 xor() 631 MB/s [ 1.337867] raid6: using algorithm neonx4 gen() 825 MB/s [ 1.337869] raid6: .... xor() 693 MB/s, rmw enabled [ 1.337873] raid6: using neon recovery algorithm [ 1.338269] fixed-1.8V: 1800 mV [ 1.338416] reg-fixed-voltage regulator-1p8v: fixed-1.8V supplying 1800000uV [ 1.338514] fixed-3.3V: 3300 mV [ 1.338640] reg-fixed-voltage regulator-3p3v: fixed-3.3V supplying 3300000uV [ 1.338727] fixed-5V: 5000 mV [ 1.338847] reg-fixed-voltage regulator-5v: fixed-5V supplying 5000000uV [ 1.339214] vgaarb: loaded [ 1.339547] SCSI subsystem initialized [ 1.339771] libata version 3.00 loaded. [ 1.339966] usbcore: registered new interface driver usbfs [ 1.340010] usbcore: registered new interface driver hub [ 1.340081] usbcore: registered new device driver usb [ 1.340138] pps_core: LinuxPPS API ver. 1 registered [ 1.340141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.340156] PTP clock support registered [ 1.340523] EDAC MC: Ver: 3.0.0 [ 1.341484] Bluetooth: Core ver 2.22 [ 1.341535] NET: Registered protocol family 31 [ 1.341539] Bluetooth: HCI device and connection manager initialized [ 1.341549] Bluetooth: HCI socket layer initialized [ 1.341555] Bluetooth: L2CAP socket layer initialized [ 1.341579] Bluetooth: SCO socket layer initialized [ 1.342176] clocksource: Switched to clocksource arch_sys_counter [ 1.417755] NET: Registered protocol family 2 [ 1.418476] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.418503] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.418583] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.418691] TCP: Hash tables configured (established 8192 bind 8192) [ 1.418796] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.418840] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.419042] NET: Registered protocol family 1 [ 1.419587] RPC: Registered named UNIX socket transport module. [ 1.419593] RPC: Registered udp transport module. [ 1.419596] RPC: Registered tcp transport module. [ 1.419599] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.420139] PCI: CLS 0 bytes, default 64 [ 1.420336] Trying to unpack rootfs image as initramfs... [ 1.687895] Freeing initrd memory: 4768K [ 1.689433] Initialise system trusted keyrings [ 1.689679] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.694936] zbud: loaded [ 1.696208] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.696868] NFS: Registering the id_resolver key type [ 1.696898] Key type id_resolver registered [ 1.696901] Key type id_legacy registered [ 1.696912] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.696941] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.697242] fuse init (API version 7.27) [ 1.697647] pstore: using deflate compression [ 1.702581] async_tx: api initialized (async) [ 1.702594] Key type asymmetric registered [ 1.702599] Asymmetric key parser 'x509' registered [ 1.702655] bounce: pool size: 64 pages [ 1.702704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.702865] io scheduler noop registered [ 1.702870] io scheduler deadline registered [ 1.703037] io scheduler cfq registered (default) [ 1.703043] io scheduler mq-deadline registered [ 1.703046] io scheduler kyber registered [ 1.703233] io scheduler bfq registered [ 1.704081] phy phy-1a149000.pcie-phy.0: Looking up phy-supply from device tree [ 1.704096] phy phy-1a149000.pcie-phy.0: Looking up phy-supply property in node /pcie-phy@1a149000/pcie-phy@1a149900 failed [ 1.704311] phy phy-1a14a000.pcie-phy.1: Looking up phy-supply from device tree [ 1.704322] phy phy-1a14a000.pcie-phy.1: Looking up phy-supply property in node /pcie-phy@1a14a000/pcie-phy@1a14a900 failed [ 1.704476] phy phy-1a1c4000.usb-phy.2: Looking up phy-supply from device tree [ 1.704486] phy phy-1a1c4000.usb-phy.2: Looking up phy-supply property in node /usb-phy@1a1c4000/usb-phy@1a1c4800 failed [ 1.704585] phy phy-1a1c4000.usb-phy.3: Looking up phy-supply from device tree [ 1.704595] phy phy-1a1c4000.usb-phy.3: Looking up phy-supply property in node /usb-phy@1a1c4000/usb-phy@1a1c4900 failed [ 1.704757] phy phy-1a244000.usb-phy.4: Looking up phy-supply from device tree [ 1.704767] phy phy-1a244000.usb-phy.4: Looking up phy-supply property in node /usb-phy@1a244000/usb-phy@1a244800 failed [ 1.704849] phy phy-1a244000.usb-phy.5: Looking up phy-supply from device tree [ 1.704858] phy phy-1a244000.usb-phy.5: Looking up phy-supply property in node /usb-phy@1a244000/usb-phy@1a244900 failed [ 1.714794] mtk-scpsys 10006000.scpsys: Looking up conn-supply from device tree [ 1.714807] mtk-scpsys 10006000.scpsys: Looking up conn-supply property in node /scpsys@10006000 failed [ 1.714821] mtk-scpsys 10006000.scpsys: Looking up disp-supply from device tree [ 1.714828] mtk-scpsys 10006000.scpsys: Looking up disp-supply property in node /scpsys@10006000 failed [ 1.714837] mtk-scpsys 10006000.scpsys: Looking up mfg-supply from device tree [ 1.714844] mtk-scpsys 10006000.scpsys: Looking up mfg-supply property in node /scpsys@10006000 failed [ 1.714852] mtk-scpsys 10006000.scpsys: Looking up vdec-supply from device tree [ 1.714859] mtk-scpsys 10006000.scpsys: Looking up vdec-supply property in node /scpsys@10006000 failed [ 1.714867] mtk-scpsys 10006000.scpsys: Looking up isp-supply from device tree [ 1.714874] mtk-scpsys 10006000.scpsys: Looking up isp-supply property in node /scpsys@10006000 failed [ 1.714882] mtk-scpsys 10006000.scpsys: Looking up bdp-supply from device tree [ 1.714889] mtk-scpsys 10006000.scpsys: Looking up bdp-supply property in node /scpsys@10006000 failed [ 1.714897] mtk-scpsys 10006000.scpsys: Looking up eth-supply from device tree [ 1.714904] mtk-scpsys 10006000.scpsys: Looking up eth-supply property in node /scpsys@10006000 failed [ 1.714912] mtk-scpsys 10006000.scpsys: Looking up hif-supply from device tree [ 1.714919] mtk-scpsys 10006000.scpsys: Looking up hif-supply property in node /scpsys@10006000 failed [ 1.714926] mtk-scpsys 10006000.scpsys: Looking up ifr_msc-supply from device tree [ 1.714933] mtk-scpsys 10006000.scpsys: Looking up ifr_msc-supply property in node /scpsys@10006000 failed [ 1.761119] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.783267] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 195, base_baud = 1625000) is a ST16650V2 [ 1.804281] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 196, base_baud = 1625000) is a ST16650V2 [ 1.825234] 11004000.serial: ttyS2 at MMIO 0x11004000 (irq = 197, base_baud = 1625000) is a ST16650V2 [ 1.825304] console [ttyS2] enabled [ 1.826539] 1100c000.serial: ttyS3 at MMIO 0x1100c000 (irq = 202, base_baud = 17062500) is a MediaTek BTIF [ 1.826987] STMicroelectronics ASC driver initialized [ 1.827854] mtk_rng 1020f000.rng: registered RNG driver [ 1.828014] random: fast init done [ 1.828225] random: crng init done [ 1.832471] brd: module loaded [ 1.840272] loop: module loaded [ 1.840539] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success [ 1.840568] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0 [ 1.842681] mt6323-regulator mt6323-regulator: Chip ID = 0x2023 [ 1.842756] vproc: 700 <--> 1350 mV at 1150 mV [ 1.842986] vsys: 1400 <--> 2987 mV at 2200 mV [ 1.843144] vpa: 500 <--> 3650 mV at 1000 mV [ 1.843538] vtcxo: 2800 mV [ 1.843707] vcn28: 2800 mV [ 1.843850] vcn33_bt: 3300 <--> 3600 mV at 3600 mV [ 1.844007] vcn33_wifi: 3300 <--> 3600 mV at 3600 mV [ 1.844496] va: 2800 mV [ 1.844677] vcama: 1500 <--> 2800 mV at 2800 mV [ 1.845187] vio28: 2800 mV [ 1.845687] vusb: 3300 mV [ 1.846001] vmc: 1800 <--> 3300 mV at 3300 mV [ 1.846372] vmch: 3000 <--> 3300 mV at 3300 mV [ 1.846738] vemc3v3: 3000 <--> 3300 mV at 3300 mV [ 1.846915] vgp1: 1200 <--> 3300 mV at 2800 mV [ 1.847084] vgp2: 1200 <--> 3000 mV at 2500 mV [ 1.847249] vgp3: 1200 <--> 1800 mV at 1200 mV [ 1.847412] vcn18: 1800 mV [ 1.847567] vsim1: 1800 <--> 3000 mV at 1800 mV [ 1.847751] vsim2: 1800 <--> 3000 mV at 1800 mV [ 1.847925] vrtc: 2800 mV [ 1.848083] vcamaf: 1200 <--> 3300 mV at 3300 mV [ 1.848256] vibr: 1200 <--> 3300 mV at 1200 mV [ 1.848415] vrf18: 1825 mV [ 1.848965] vm: 1200 <--> 1800 mV at 1500 mV [ 1.849516] vio18: 1800 mV [ 1.849713] vcamd: 1200 <--> 1800 mV at 1200 mV [ 1.849882] vcamio: 1800 mV [ 1.850893] Uniform Multi-Platform E-IDE driver [ 1.850961] ide-gd driver 1.18 [ 1.852813] libphy: Fixed MDIO Bus: probed [ 1.875809] libphy: mdio: probed [ 1.875928] mtk_soc_eth 1b100000.ethernet: generated random MAC address 86:28:bf:d0:09:78 [ 1.880123] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 1.880576] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xf08c0000, irq 213 [ 1.881047] xhci-mtk 1a1c0000.usb: Looking up vbus-supply from device tree [ 1.881115] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.3 [ 1.881123] xhci-mtk 1a1c0000.usb: Looking up vusb33-supply from device tree [ 1.881178] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.2 [ 1.881462] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 1.881511] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1 [ 1.884893] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 1.884951] xhci-mtk 1a1c0000.usb: irq 210, io mem 0x1a1c0000 [ 1.885882] hub 1-0:1.0: USB hub found [ 1.885927] hub 1-0:1.0: 1 port detected [ 1.886343] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 1.886360] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2 [ 1.886374] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed [ 1.886477] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.887074] hub 2-0:1.0: USB hub found [ 1.887124] hub 2-0:1.0: 1 port detected [ 1.887557] xhci-mtk 1a240000.usb: Looking up vbus-supply from device tree [ 1.887625] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.3 [ 1.887633] xhci-mtk 1a240000.usb: Looking up vusb33-supply from device tree [ 1.887698] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.2 [ 1.887951] xhci-mtk 1a240000.usb: xHCI Host Controller [ 1.887985] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3 [ 1.891177] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 1.891235] xhci-mtk 1a240000.usb: irq 211, io mem 0x1a240000 [ 1.892093] hub 3-0:1.0: USB hub found [ 1.892138] hub 3-0:1.0: 1 port detected [ 1.892493] xhci-mtk 1a240000.usb: xHCI Host Controller [ 1.892509] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4 [ 1.892528] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed [ 1.892616] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.893212] hub 4-0:1.0: USB hub found [ 1.893257] hub 4-0:1.0: 1 port detected [ 1.893819] usbcore: registered new interface driver usb-storage [ 1.894592] mt6397-rtc mt6323-rtc: registered as rtc0 [ 1.894777] i2c /dev entries driver [ 1.896032] MTK_WDT_NONRST_REG(0) [ 1.896681] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.898443] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.898781] device-mapper: multipath round-robin: version 1.2.0 loaded [ 1.898787] device-mapper: multipath queue-length: version 0.2.0 loaded [ 1.898791] device-mapper: multipath service-time: version 0.3.0 loaded [ 1.898850] device-mapper: raid: Loading target version 1.14.0 [ 1.899283] cpu cpu0: Looking up proc-supply from device tree [ 1.899372] cpu cpu0: Linked as a consumer to regulator.4 [ 1.899379] cpu cpu0: Looking up sram-supply from device tree [ 1.899390] cpu cpu0: Looking up sram-supply property in node /cpus/cpu@0 failed [ 1.899422] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.901253] mtk-msdc 11230000.mmc: Looking up vmmc-supply from device tree [ 1.901338] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.2 [ 1.901346] mtk-msdc 11230000.mmc: Looking up vqmmc-supply from device tree [ 1.901410] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.1 [ 1.929108] mtk-msdc 11240000.mmc: Got CD GPIO [ 1.929373] mtk-msdc 11240000.mmc: Looking up vmmc-supply from device tree [ 1.929630] mtk-msdc 11240000.mmc: Linked as a consumer to regulator.2 [ 1.929665] mtk-msdc 11240000.mmc: Looking up vqmmc-supply from device tree [ 1.964266] ledtrig-cpu: registered to indicate activity on CPUs [ 1.966598] hidraw: raw HID events driver (C) Jiri Kosina [ 1.966727] usbcore: registered new interface driver usbhid [ 1.966730] usbhid: USB HID core driver [ 1.967432] Initializing XFRM netlink socket [ 1.967920] NET: Registered protocol family 10 [ 1.978930] mmc0: new high speed MMC card at address 0001 [ 1.981977] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB [ 1.984775] mmcblk0boot0: mmc0:0001 8WPD3R partition 1 4.00 MiB [ 1.987607] mmcblk0boot1: mmc0:0001 8WPD3R partition 2 4.00 MiB [ 1.987912] mmcblk0rpmb: mmc0:0001 8WPD3R partition 3 512 KiB, chardev (241:0) [ 1.988982] Segment Routing with IPv6 [ 1.989079] NET: Registered protocol family 17 [ 1.989109] NET: Registered protocol family 15 [ 1.989162] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.989202] 8021q: 802.1Q VLAN Support v1.8 [ 1.989424] Key type dns_resolver registered [ 1.989668] ThumbEE CPU extension supported. [ 1.989681] Registering SWP/SWPB emulation handler [ 1.990224] mmcblk0: p1 [ 1.990620] Loading compiled-in X.509 certificates [ 1.990703] zswap: loaded using pool lzo/zbud [ 1.992453] Btrfs loaded, crc32c=crc32c-generic [ 2.108462] mtk-pcie 1a140000.pcie: Port0 link down [ 2.139001] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00 [ 2.139018] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff]) [ 2.139028] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 2.139038] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.139221] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400 [ 2.139262] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 2.139337] pci 0000:00:01.0: supports D1 [ 2.139344] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 2.142035] PCI: bus0: Fast back to back transfers disabled [ 2.142051] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.142304] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185 [ 2.142346] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.142356] pci 0000:01:00.0: reg 0x10: [io size 0x0008] [ 2.142372] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 2.142380] pci 0000:01:00.0: reg 0x14: [io size 0x0004] [ 2.142397] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 2.142405] pci 0000:01:00.0: reg 0x18: [io size 0x0008] [ 2.142420] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid [ 2.142428] pci 0000:01:00.0: reg 0x1c: [io size 0x0004] [ 2.142444] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid [ 2.142452] pci 0000:01:00.0: reg 0x20: [io size 0x0010] [ 2.142469] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 2.142485] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.142606] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ 2.156686] PCI: bus1: Fast back to back transfers disabled [ 2.156704] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.156763] pci 0000:00:01.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 2.156776] pci 0000:00:01.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 2.156786] pci 0000:00:01.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] [ 2.156800] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.156821] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] [ 2.156831] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff] [ 2.156845] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x100f] [ 2.156858] pci 0000:01:00.0: BAR 0: assigned [io 0x1010-0x1017] [ 2.156871] pci 0000:01:00.0: BAR 2: assigned [io 0x1018-0x101f] [ 2.156884] pci 0000:01:00.0: BAR 1: assigned [io 0x1020-0x1023] [ 2.156897] pci 0000:01:00.0: BAR 3: assigned [io 0x1024-0x1027] [ 2.156910] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.156921] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 2.156932] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff] [ 2.156943] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff pref] [ 2.157185] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 2.157459] ahci 0000:01:00.0: version 3.0 [ 2.157481] ahci 0000:01:00.0: enabling device (0140 -> 0143) [ 2.157613] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 2.157672] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.157685] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.160094] scsi host0: ahci [ 2.161084] scsi host1: ahci [ 2.161533] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 226 [ 2.161546] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 226 [ 2.161961] mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property [ 2.162523] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered [ 2.164831] mt6397-rtc mt6323-rtc: setting system clock to 2018-11-12 11:32:07 UTC (1542022327) [ 2.165010] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.174774] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.175350] vpa: disabling [ 2.175384] vusb: disabling [ 2.175397] vmc: disabling [ 2.175409] vmch: disabling [ 2.175421] vemc3v3: disabling [ 2.175434] vgp1: disabling [ 2.175468] vcamaf: disabling [ 2.176268] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.176278] cfg80211: failed to load regulatory.db [ 2.474292] ata1: SATA link down (SStatus 0 SControl 300) [ 2.786283] ata2: SATA link down (SStatus 0 SControl 300) [ 2.791885] Freeing unused kernel memory: 1024K [ 2.793105] Run /init as init process [ 3.229908] mt7530 mdio-bus:00: Looking up core-supply from device tree [ 3.230028] mt7530 mdio-bus:00: Linked as a consumer to regulator.6 [ 3.230037] mt7530 mdio-bus:00: Looking up io-supply from device tree [ 3.230093] mt7530 mdio-bus:00: Linked as a consumer to regulator.17 [ 3.429358] libphy: dsa slave smi: probed [ 3.430256] mt7530 mdio-bus:00 wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 3.431799] mt7530 mdio-bus:00 lan0 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 3.433350] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 3.434917] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 3.436418] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] [ 3.448144] DSA: tree 0 setup [ 3.909226] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.471232] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.471742] systemd[1]: Detected architecture arm. [ 4.489971] systemd[1]: Set hostname to . [ 4.916048] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.936451] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.965984] systemd[1]: Reached target Remote File Systems. [ 4.983313] systemd[1]: Reached target Swap. [ 4.998829] systemd[1]: Listening on Network Service Netlink Socket. [ 5.017659] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.039777] systemd[1]: Reached target Encrypted Volumes. [ 5.357054] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 5.961674] systemd-journald[232]: Received request to flush runtime journal from PID 1 [ 6.299560] br0: port 1(lan3) entered blocking state [ 6.299578] br0: port 1(lan3) entered disabled state [ 6.299855] device lan3 entered promiscuous mode [ 6.299861] device eth0 entered promiscuous mode [ 6.302628] br0: port 2(lan2) entered blocking state [ 6.302644] br0: port 2(lan2) entered disabled state [ 6.302949] device lan2 entered promiscuous mode [ 6.305463] br0: port 3(lan1) entered blocking state [ 6.305475] br0: port 3(lan1) entered disabled state [ 6.305766] device lan1 entered promiscuous mode [ 6.313790] br0: port 4(lan0) entered blocking state [ 6.313803] br0: port 4(lan0) entered disabled state [ 6.314097] device lan0 entered promiscuous mode [ 6.318373] br0: port 5(wan) entered blocking state [ 6.318386] br0: port 5(wan) entered disabled state [ 6.318710] device wan entered promiscuous mode [ 6.339418] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode [ 6.339885] br0: bridge flag offload is not supported 1(lan3) [ 6.346378] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode [ 6.347017] br0: bridge flag offload is not supported 2(lan2) [ 6.352561] zram: Added device: zram0 [ 6.353341] zram: Added device: zram1 [ 6.356169] zram: Added device: zram2 [ 6.356809] zram: Added device: zram3 [ 6.357341] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode [ 6.357851] br0: bridge flag offload is not supported 3(lan1) [ 6.362795] zram: Added device: zram4 [ 6.366326] zram: Added device: zram5 [ 6.370756] mt7530 mdio-bus:00 lan0: configuring for phy/gmii link mode [ 6.371099] br0: bridge flag offload is not supported 4(lan0) [ 6.374760] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode [ 6.375457] br0: bridge flag offload is not supported 5(wan) [ 6.449653] Registered IR keymap rc-empty [ 6.449781] rc rc0: mtk_cir as /devices/platform/10013000.cir/rc/rc0 [ 6.449921] input: mtk_cir as /devices/platform/10013000.cir/rc/rc0/input0 [ 6.450349] rc rc0: lirc_dev: driver mtk_cir registered at minor = 0, raw IR receiver, no transmitter [ 6.458432] mtk_cir 10013000.cir: Initialized MT7623 IR driver, sample period = 46us [ 6.458910] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values [ 6.490274] zram1: detected capacity change from 0 to 263512064 [ 6.502680] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 6.683824] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 6.690801] Adding 257332k swap on /dev/zram1. Priority:5 extents:1 across:257332k SSFS [ 6.701896] zram2: detected capacity change from 0 to 263512064 [ 6.799863] Adding 257332k swap on /dev/zram2. Priority:5 extents:1 across:257332k SSFS [ 6.804368] zram3: detected capacity change from 0 to 263512064 [ 6.943040] Adding 257332k swap on /dev/zram3. Priority:5 extents:1 across:257332k SSFS [ 6.945695] zram4: detected capacity change from 0 to 263512064 [ 6.997829] Adding 257332k swap on /dev/zram4. Priority:5 extents:1 across:257332k SSFS [ 7.412815] zram0: detected capacity change from 0 to 52428800 [ 7.985857] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=bananapir2 BOARD_NAME="Banana Pi R2" BOARDFAMILY=mt7623 VERSION=5.67 LINUXFAMILY=mt7623 BRANCH=default ARCH=arm IMAGE_TYPE=user-built BOARD_TYPE=csc INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage ### boot environment: verbosity=1 rootdev=UUID=c4a97a53-fd1c-4777-afcb-abbfad41afbc rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Model: 3 Model name: ARMv7 Processor rev 3 (v7l) CPU max MHz: 1300.0000 CPU min MHz: 98.0000 BogoMIPS: 32.50 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 32.50 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 Hardware : Mediatek Cortex-A7 (Device Tree) Revision : 0000 Serial : 0000000000000000 ### meminfo: MemTotal: 2058668 kB MemFree: 1927052 kB MemAvailable: 1924280 kB Buffers: 7632 kB Cached: 41516 kB SwapCached: 0 kB Active: 31112 kB Inactive: 30612 kB Active(anon): 12772 kB Inactive(anon): 3872 kB Active(file): 18340 kB Inactive(file): 26740 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1309692 kB HighFree: 1240880 kB LowTotal: 748976 kB LowFree: 686172 kB SwapTotal: 1029328 kB SwapFree: 1029328 kB Dirty: 96 kB Writeback: 4 kB AnonPages: 12716 kB Mapped: 17968 kB Shmem: 3984 kB Slab: 22960 kB SReclaimable: 11632 kB SUnreclaim: 11328 kB KernelStack: 928 kB PageTables: 496 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2058660 kB Committed_AS: 66740 kB VmallocTotal: 245760 kB VmallocUsed: 0 kB VmallocChunk: 0 kB Percpu: 432 kB CmaTotal: 65536 kB CmaFree: 64888 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.drop_caches = 0 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3448 vm.mmap_min_addr = 4096 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 64026 vm.vfs_cache_pressure = 100 vm.watermark_scale_factor = 10 ### ip addr: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 86:28:bf:d0:09:78 brd ff:ff:ff:ff:ff:ff inet6 fe80::8428:bfff:fed0:978/64 scope link valid_lft forever preferred_lft forever 3: wan@eth0: mtu 1500 qdisc noqueue master br0 state LOWERLAYERDOWN group default qlen 1000 link/ether 86:28:bf:d0:09:78 brd ff:ff:ff:ff:ff:ff 4: lan0@eth0: mtu 1500 qdisc noqueue master br0 state LOWERLAYERDOWN group default qlen 1000 link/ether 86:28:bf:d0:09:78 brd ff:ff:ff:ff:ff:ff 5: lan1@eth0: mtu 1500 qdisc noqueue master br0 state UP group default qlen 1000 link/ether 86:28:bf:d0:09:78 brd ff:ff:ff:ff:ff:ff 6: lan2@eth0: mtu 1500 qdisc noqueue master br0 state LOWERLAYERDOWN group default qlen 1000 link/ether 86:28:bf:d0:09:78 brd ff:ff:ff:ff:ff:ff 7: lan3@eth0: mtu 1500 qdisc noqueue master br0 state LOWERLAYERDOWN group default qlen 1000 link/ether 86:28:bf:d0:09:78 brd ff:ff:ff:ff:ff:ff 8: br0: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 12:1d:91:7a:19:f1 brd ff:ff:ff:ff:ff:ff inet6 fe80::101d:91ff:fe7a:19f1/64 scope link tentative valid_lft forever preferred_lft forever ### partitions: major minor #blocks name 179 0 7634944 mmcblk0 179 1 7554496 mmcblk0p1 252 0 51200 zram0 252 1 257336 zram1 252 2 257336 zram2 252 3 257336 zram3 252 4 257336 zram4 ### df: udev 971M 0 971M 0% /dev tmpfs 202M 4.0M 198M 2% /run /dev/mmcblk0p1 7.1G 983M 5.7G 15% / tmpfs 1006M 0 1006M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 1006M 0 1006M 0% /sys/fs/cgroup tmpfs 1006M 96K 1006M 1% /tmp /dev/zram0 49M 1.4M 44M 3% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 7.3G └─mmcblk0p1 ext4 7.2G / c4a97a53-fd1c-4777-afcb-abbfad41afbc mmcblk0boot0 4M mmcblk0boot1 4M zram0 50M /var/log ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 50M 1.4M 218.7K 572K 4 /var/log /dev/zram1 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram2 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram3 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram4 lzo 251.3M 4K 78B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/zram0 /var/log ext4 rw,relatime,block_validity,discard,delalloc,nojournal_checksum,barrier,user_xattr,acl 0 0 ### mmc0:0001 info: manfid: 0x000015 cid: 150100385750443352002b8deebb8415 fwrev: 0x0000000000000000 rca: 0x0001 csd: d02701320f5903fff6dbffef8e40400d life_time: 0x01 0x01 ocr: 0x00200000 type: MMC enhanced_area_offset: 18446744073709551594 date: 08/2017 hwrev: 0x0 prv: 0x0 dsr: 0x404 ffu_capable: 1 serial: 0x2b8deebb raw_rpmb_size_mult: 0x4 erase_size: 524288 pre_eol_info: 0x01 rel_sectors: 0x1 cmdq_en: 0 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8WPD3R MODALIAS=mmc:block enhanced_area_size: 4294967274 oemid: 0x0100 rev: 0x7 preferred_erase_size: 4194304 name: 8WPD3R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 11:32:17: 1300MHz 0.47 58% 28% 25% 0% 4% 0% 41.3°C 0/7 11:32:17: 1300MHz 0.47 32% 7% 23% 1% 0% 0% 40.5°C 0/7 11:32:18: 1300MHz 0.47 31% 5% 24% 1% 0% 0% 40.5°C 0/7 11:32:18: 1300MHz 0.47 33% 6% 25% 1% 0% 0% 40.4°C 0/7 11:32:19: 1300MHz 0.47 32% 4% 25% 2% 0% 0% 40.0°C 0/7 ### lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 5000M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 480M ### lspci: 00:01.0 PCI bridge: MEDIATEK Corp. Device 0801 (rev 01) 01:00.0 IDE interface: ASMedia Technology Inc. ASM1061 SATA IDE Controller (rev 02) ### Installed packages: ii armbian-config 5.67 all Armbian configuration utility ii armbian-firmware 5.67 all Linux firmware ii armbian-tools-stretch 5.67 armhf Armbian tools, Cubie bt utils ii hostapd 3:2.6-99~armbian5.60+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator ii linux-base 4.5 all Linux image base package hi linux-dtb-mt7623 5.67 armhf Linux DTB, version 4.19.1-mt7623 hi linux-headers-mt7623 5.67 armhf Linux kernel headers for 4.19.1-mt7623 on armhf hi linux-image-mt7623 5.67 armhf Linux kernel, version 4.19.1-mt7623 ii linux-libc-dev:armhf 4.9.110-3+deb9u6 armhf Linux support headers for userspace development ii linux-stretch-root-bananapir2 5.67 armhf Armbian tweaks for stretch on bananapir2 (default branch) hi linux-u-boot-bananapir2-default 5.67 armhf Uboot loader 2018.11-rc1 ii sunxi-tools 1.4.2-2~armbian5.60+1 armhf tools for working with Allwinner (sunxi) ARM processors ### Loaded modules: Module Size Used by zstd 16384 4 evdev 24576 0 gpio_keys 20480 0 snd_soc_mt2701_afe 32768 0 snd_soc_mtk_common 16384 1 snd_soc_mt2701_afe snd_soc_core 176128 2 snd_soc_mtk_common,snd_soc_mt2701_afe snd_pcm_dmaengine 16384 1 snd_soc_core snd_pcm 94208 4 snd_soc_mtk_common,snd_soc_mt2701_afe,snd_pcm_dmaengine,snd_soc_core snd_timer 32768 1 snd_pcm snd 61440 3 snd_timer,snd_soc_core,snd_pcm soundcore 16384 1 snd spi_mt65xx 20480 0 pwm_mediatek 16384 0 mt6577_auxadc 16384 0 nvmem_mtk_efuse 16384 0 mtk_cir 16384 0 rc_core 40960 2 mtk_cir zram 28672 5 ip_tables 24576 0 x_tables 32768 1 ip_tables mt7530 20480 0 dsa_core 45056 6 mt7530 phylink 28672 1 dsa_core i2c_mt65xx 20480 0 ### nand-sata-install.log: Mon Nov 12 10:53:58 UTC 2018: Start nand-sata-install. Mon Nov 12 10:54:01 UTC 2018: Start nand-sata-install. Mon Nov 12 10:54:05 UTC 2018: Start nand-sata-install. Old UUID: UUID=340428b0-bf8a-4647-8e4e-504203322e72 SD UUID: UUID=c4a97a53-fd1c-4777-afcb-abbfad41afbc UUID=340428b0-bf8a-4647-8e4e-504203322e72 SATA UUID: UUID=c4a97a53-fd1c-4777-afcb-abbfad41afbc eMMC UUID: UUID=c4a97a53-fd1c-4777-afcb-abbfad41afbc ext4 Boot: $1 /dev/mmcblk0p1 ext4 Root: $2 /dev/mmcblk0p1 Usage: 948 Dest: 6781 /etc/fstab: UUID=340428b0-bf8a-4647-8e4e-504203322e72 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,nosuid 0 0 /etc/mtab: /dev/mmcblk0p1 /mnt/nand-sata-install.2sR5jw/bootfs ext4 rw,relatime 0 0 /dev/mmcblk0p1 /mnt/nand-sata-install.2sR5jw/rootfs ext4 rw,relatime 0 0 /dev/mmcblk1p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk1p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/zram0 /var/log ext4 rw,relatime,block_validity,discard,delalloc,nojournal_checksum,barrier,user_xattr,acl 0 0 Files currently open for writing: Trying to stop running services to minimize open files: Stopping cron.service Checking again for open files: Copying 57680 files to /dev/mmcblk0p1. Finishing full install to eMMC. Checking again for open files: Mon Nov 12 11:29:36 UTC 2018: Finished ### Current system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 14:16:16: 1300MHz 0.03 1% 0% 0% 0% 0% 0% 39.7°C 0/7 14:16:16: 1300MHz 0.03 5% 4% 0% 1% 0% 0% 38.6°C 0/7 14:16:17: 1300MHz 0.03 5% 4% 0% 1% 0% 0% 38.6°C 0/7 14:16:17: 1300MHz 0.03 5% 4% 0% 1% 0% 0% 38.5°C 0/7 14:16:17: 1300MHz 0.03 6% 4% 0% 1% 0% 0% 38.8°C 0/7 14:16:21: 1300MHz 0.03 1% 0% 0% 0% 0% 0% 46.7°C 0/7 14:16:21: 1300MHz 0.03 72% 1% 70% 0% 0% 0% 41.7°C 0/7 14:16:22: 1300MHz 0.03 5% 2% 0% 3% 0% 0% 41.3°C 0/7 14:16:22: 1300MHz 0.03 5% 3% 0% 1% 0% 0% 41.1°C 0/7 14:16:22: 1300MHz 0.11 5% 4% 0% 1% 0% 0% 40.4°C 0/7 ### resolv.conf lrwxrwxrwx 1 root root 32 Nov 12 10:53 /etc/resolv.conf -> /run/systemd/resolve/resolv.conf # This file is managed by systemd-resolved(8). Do not edit. # # This is a dynamic resolv.conf file for connecting local clients directly to # all known DNS servers. # # Third party programs must not access this file directly, but only through the # symlink at /etc/resolv.conf. To manage resolv.conf(5) in a different way, # replace this symlink by a static file or a different symlink. # # See systemd-resolved.service(8) for details about the supported modes of # operation for /etc/resolv.conf. nameserver XXX.XXX.100.1 nameserver XXX.XXX.8.8 nameserver XXX.XXX.209.79 ### Current sysinfo: Linux 4.19.1-mt7623 (bananapir2) 11/12/2018 _armv7l_ (4 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.63 0.00 0.84 0.01 0.00 98.52 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn ram0 0.00 0.00 0.00 0 0 ram1 0.00 0.00 0.00 0 0 ram2 0.00 0.00 0.00 0 0 ram3 0.00 0.00 0.00 0 0 mmcblk0 0.25 8.09 5.27 79769 51924 mmcblk0p1 0.23 7.77 5.27 76645 51924 mmcblk0boot1 0.01 0.02 0.00 216 0 mmcblk0boot0 0.01 0.02 0.00 216 0 zram0 0.07 0.07 0.20 732 2008 zram1 0.03 0.12 0.00 1180 4 zram2 0.03 0.12 0.00 1180 4 zram3 0.03 0.12 0.00 1180 4 zram4 0.03 0.12 0.00 1180 4 zram5 0.00 0.00 0.00 0 0 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 1833564 8968 135564 0 0 2 1 27 35 1 1 99 0 0 total used free shared buff/cache available Mem: 2.0G 78M 1.7G 3.9M 141M 1.8G Swap: 1.0G 0B 1.0G NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 50M 1.4M 232.9K 604K 4 /var/log /dev/zram1 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram2 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram3 lzo 251.3M 4K 78B 12K 4 [SWAP] /dev/zram4 lzo 251.3M 4K 78B 12K 4 [SWAP] 14:16:23 up 2:44, 1 user, load average: 0.11, 0.06, 0.01 [ 1.846001] vmc: 1800 <--> 3300 mV at 3300 mV [ 1.846372] vmch: 3000 <--> 3300 mV at 3300 mV [ 1.846738] vemc3v3: 3000 <--> 3300 mV at 3300 mV [ 1.846915] vgp1: 1200 <--> 3300 mV at 2800 mV [ 1.847084] vgp2: 1200 <--> 3000 mV at 2500 mV [ 1.847249] vgp3: 1200 <--> 1800 mV at 1200 mV [ 1.847412] vcn18: 1800 mV [ 1.847567] vsim1: 1800 <--> 3000 mV at 1800 mV [ 1.847751] vsim2: 1800 <--> 3000 mV at 1800 mV [ 1.847925] vrtc: 2800 mV [ 1.848083] vcamaf: 1200 <--> 3300 mV at 3300 mV [ 1.848256] vibr: 1200 <--> 3300 mV at 1200 mV [ 1.848415] vrf18: 1825 mV [ 1.848965] vm: 1200 <--> 1800 mV at 1500 mV [ 1.849516] vio18: 1800 mV [ 1.849713] vcamd: 1200 <--> 1800 mV at 1200 mV [ 1.849882] vcamio: 1800 mV [ 1.850893] Uniform Multi-Platform E-IDE driver [ 1.850961] ide-gd driver 1.18 [ 1.852813] libphy: Fixed MDIO Bus: probed [ 1.875809] libphy: mdio: probed [ 1.875928] mtk_soc_eth 1b100000.ethernet: generated random MAC address 86:28:bf:d0:09:78 [ 1.880123] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 1.880576] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xf08c0000, irq 213 [ 1.881047] xhci-mtk 1a1c0000.usb: Looking up vbus-supply from device tree [ 1.881115] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.3 [ 1.881123] xhci-mtk 1a1c0000.usb: Looking up vusb33-supply from device tree [ 1.881178] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.2 [ 1.881462] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 1.881511] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1 [ 1.884893] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 1.884951] xhci-mtk 1a1c0000.usb: irq 210, io mem 0x1a1c0000 [ 1.885882] hub 1-0:1.0: USB hub found [ 1.885927] hub 1-0:1.0: 1 port detected [ 1.886343] xhci-mtk 1a1c0000.usb: xHCI Host Controller [ 1.886360] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2 [ 1.886374] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed [ 1.886477] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.887074] hub 2-0:1.0: USB hub found [ 1.887124] hub 2-0:1.0: 1 port detected [ 1.887557] xhci-mtk 1a240000.usb: Looking up vbus-supply from device tree [ 1.887625] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.3 [ 1.887633] xhci-mtk 1a240000.usb: Looking up vusb33-supply from device tree [ 1.887698] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.2 [ 1.887951] xhci-mtk 1a240000.usb: xHCI Host Controller [ 1.887985] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3 [ 1.891177] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 1.891235] xhci-mtk 1a240000.usb: irq 211, io mem 0x1a240000 [ 1.892093] hub 3-0:1.0: USB hub found [ 1.892138] hub 3-0:1.0: 1 port detected [ 1.892493] xhci-mtk 1a240000.usb: xHCI Host Controller [ 1.892509] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4 [ 1.892528] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed [ 1.892616] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.893212] hub 4-0:1.0: USB hub found [ 1.893257] hub 4-0:1.0: 1 port detected [ 1.893819] usbcore: registered new interface driver usb-storage [ 1.894592] mt6397-rtc mt6323-rtc: registered as rtc0 [ 1.894777] i2c /dev entries driver [ 1.896032] MTK_WDT_NONRST_REG(0) [ 1.896681] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.898443] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.898781] device-mapper: multipath round-robin: version 1.2.0 loaded [ 1.898787] device-mapper: multipath queue-length: version 0.2.0 loaded [ 1.898791] device-mapper: multipath service-time: version 0.3.0 loaded [ 1.898850] device-mapper: raid: Loading target version 1.14.0 [ 1.899283] cpu cpu0: Looking up proc-supply from device tree [ 1.899372] cpu cpu0: Linked as a consumer to regulator.4 [ 1.899379] cpu cpu0: Looking up sram-supply from device tree [ 1.899390] cpu cpu0: Looking up sram-supply property in node /cpus/cpu@0 failed [ 1.899422] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.901253] mtk-msdc 11230000.mmc: Looking up vmmc-supply from device tree [ 1.901338] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.2 [ 1.901346] mtk-msdc 11230000.mmc: Looking up vqmmc-supply from device tree [ 1.901410] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.1 [ 1.929108] mtk-msdc 11240000.mmc: Got CD GPIO [ 1.929373] mtk-msdc 11240000.mmc: Looking up vmmc-supply from device tree [ 1.929630] mtk-msdc 11240000.mmc: Linked as a consumer to regulator.2 [ 1.929665] mtk-msdc 11240000.mmc: Looking up vqmmc-supply from device tree [ 1.964266] ledtrig-cpu: registered to indicate activity on CPUs [ 1.966598] hidraw: raw HID events driver (C) Jiri Kosina [ 1.966727] usbcore: registered new interface driver usbhid [ 1.966730] usbhid: USB HID core driver [ 1.967432] Initializing XFRM netlink socket [ 1.967920] NET: Registered protocol family 10 [ 1.978930] mmc0: new high speed MMC card at address 0001 [ 1.981977] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB [ 1.984775] mmcblk0boot0: mmc0:0001 8WPD3R partition 1 4.00 MiB [ 1.987607] mmcblk0boot1: mmc0:0001 8WPD3R partition 2 4.00 MiB [ 1.987912] mmcblk0rpmb: mmc0:0001 8WPD3R partition 3 512 KiB, chardev (241:0) [ 1.988982] Segment Routing with IPv6 [ 1.989079] NET: Registered protocol family 17 [ 1.989109] NET: Registered protocol family 15 [ 1.989162] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.989202] 8021q: 802.1Q VLAN Support v1.8 [ 1.989424] Key type dns_resolver registered [ 1.989668] ThumbEE CPU extension supported. [ 1.989681] Registering SWP/SWPB emulation handler [ 1.990224] mmcblk0: p1 [ 1.990620] Loading compiled-in X.509 certificates [ 1.990703] zswap: loaded using pool lzo/zbud [ 1.992453] Btrfs loaded, crc32c=crc32c-generic [ 2.108462] mtk-pcie 1a140000.pcie: Port0 link down [ 2.139001] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00 [ 2.139018] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff]) [ 2.139028] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 2.139038] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.139221] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400 [ 2.139262] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 2.139337] pci 0000:00:01.0: supports D1 [ 2.139344] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 2.142035] PCI: bus0: Fast back to back transfers disabled [ 2.142051] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.142304] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185 [ 2.142346] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.142356] pci 0000:01:00.0: reg 0x10: [io size 0x0008] [ 2.142372] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 2.142380] pci 0000:01:00.0: reg 0x14: [io size 0x0004] [ 2.142397] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 2.142405] pci 0000:01:00.0: reg 0x18: [io size 0x0008] [ 2.142420] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid [ 2.142428] pci 0000:01:00.0: reg 0x1c: [io size 0x0004] [ 2.142444] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid [ 2.142452] pci 0000:01:00.0: reg 0x20: [io size 0x0010] [ 2.142469] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 2.142485] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.142606] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ 2.156686] PCI: bus1: Fast back to back transfers disabled [ 2.156704] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.156763] pci 0000:00:01.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 2.156776] pci 0000:00:01.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 2.156786] pci 0000:00:01.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] [ 2.156800] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.156821] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] [ 2.156831] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff] [ 2.156845] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x100f] [ 2.156858] pci 0000:01:00.0: BAR 0: assigned [io 0x1010-0x1017] [ 2.156871] pci 0000:01:00.0: BAR 2: assigned [io 0x1018-0x101f] [ 2.156884] pci 0000:01:00.0: BAR 1: assigned [io 0x1020-0x1023] [ 2.156897] pci 0000:01:00.0: BAR 3: assigned [io 0x1024-0x1027] [ 2.156910] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.156921] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 2.156932] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff] [ 2.156943] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff pref] [ 2.157185] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 2.157459] ahci 0000:01:00.0: version 3.0 [ 2.157481] ahci 0000:01:00.0: enabling device (0140 -> 0143) [ 2.157613] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 2.157672] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.157685] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.160094] scsi host0: ahci [ 2.161084] scsi host1: ahci [ 2.161533] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 226 [ 2.161546] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 226 [ 2.161961] mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property [ 2.162523] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered [ 2.164831] mt6397-rtc mt6323-rtc: setting system clock to 2018-11-12 11:32:07 UTC (1542022327) [ 2.165010] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.174774] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.175350] vpa: disabling [ 2.175384] vusb: disabling [ 2.175397] vmc: disabling [ 2.175409] vmch: disabling [ 2.175421] vemc3v3: disabling [ 2.175434] vgp1: disabling [ 2.175468] vcamaf: disabling [ 2.176268] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.176278] cfg80211: failed to load regulatory.db [ 2.474292] ata1: SATA link down (SStatus 0 SControl 300) [ 2.786283] ata2: SATA link down (SStatus 0 SControl 300) [ 2.791885] Freeing unused kernel memory: 1024K [ 2.793105] Run /init as init process [ 3.229908] mt7530 mdio-bus:00: Looking up core-supply from device tree [ 3.230028] mt7530 mdio-bus:00: Linked as a consumer to regulator.6 [ 3.230037] mt7530 mdio-bus:00: Looking up io-supply from device tree [ 3.230093] mt7530 mdio-bus:00: Linked as a consumer to regulator.17 [ 3.429358] libphy: dsa slave smi: probed [ 3.430256] mt7530 mdio-bus:00 wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 3.431799] mt7530 mdio-bus:00 lan0 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 3.433350] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 3.434917] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 3.436418] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] [ 3.448144] DSA: tree 0 setup [ 3.909226] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.471232] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.471742] systemd[1]: Detected architecture arm. [ 4.489971] systemd[1]: Set hostname to . [ 4.916048] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.936451] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.965984] systemd[1]: Reached target Remote File Systems. [ 4.983313] systemd[1]: Reached target Swap. [ 4.998829] systemd[1]: Listening on Network Service Netlink Socket. [ 5.017659] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.039777] systemd[1]: Reached target Encrypted Volumes. [ 5.357054] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 5.961674] systemd-journald[232]: Received request to flush runtime journal from PID 1 [ 6.299560] br0: port 1(lan3) entered blocking state [ 6.299578] br0: port 1(lan3) entered disabled state [ 6.299855] device lan3 entered promiscuous mode [ 6.299861] device eth0 entered promiscuous mode [ 6.302628] br0: port 2(lan2) entered blocking state [ 6.302644] br0: port 2(lan2) entered disabled state [ 6.302949] device lan2 entered promiscuous mode [ 6.305463] br0: port 3(lan1) entered blocking state [ 6.305475] br0: port 3(lan1) entered disabled state [ 6.305766] device lan1 entered promiscuous mode [ 6.313790] br0: port 4(lan0) entered blocking state [ 6.313803] br0: port 4(lan0) entered disabled state [ 6.314097] device lan0 entered promiscuous mode [ 6.318373] br0: port 5(wan) entered blocking state [ 6.318386] br0: port 5(wan) entered disabled state [ 6.318710] device wan entered promiscuous mode [ 6.339418] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode [ 6.339885] br0: bridge flag offload is not supported 1(lan3) [ 6.346378] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode [ 6.347017] br0: bridge flag offload is not supported 2(lan2) [ 6.352561] zram: Added device: zram0 [ 6.353341] zram: Added device: zram1 [ 6.356169] zram: Added device: zram2 [ 6.356809] zram: Added device: zram3 [ 6.357341] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode [ 6.357851] br0: bridge flag offload is not supported 3(lan1) [ 6.362795] zram: Added device: zram4 [ 6.366326] zram: Added device: zram5 [ 6.370756] mt7530 mdio-bus:00 lan0: configuring for phy/gmii link mode [ 6.371099] br0: bridge flag offload is not supported 4(lan0) [ 6.374760] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode [ 6.375457] br0: bridge flag offload is not supported 5(wan) [ 6.449653] Registered IR keymap rc-empty [ 6.449781] rc rc0: mtk_cir as /devices/platform/10013000.cir/rc/rc0 [ 6.449921] input: mtk_cir as /devices/platform/10013000.cir/rc/rc0/input0 [ 6.450349] rc rc0: lirc_dev: driver mtk_cir registered at minor = 0, raw IR receiver, no transmitter [ 6.458432] mtk_cir 10013000.cir: Initialized MT7623 IR driver, sample period = 46us [ 6.458910] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values [ 6.490274] zram1: detected capacity change from 0 to 263512064 [ 6.502680] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 6.683824] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 6.690801] Adding 257332k swap on /dev/zram1. Priority:5 extents:1 across:257332k SSFS [ 6.701896] zram2: detected capacity change from 0 to 263512064 [ 6.799863] Adding 257332k swap on /dev/zram2. Priority:5 extents:1 across:257332k SSFS [ 6.804368] zram3: detected capacity change from 0 to 263512064 [ 6.943040] Adding 257332k swap on /dev/zram3. Priority:5 extents:1 across:257332k SSFS [ 6.945695] zram4: detected capacity change from 0 to 263512064 [ 6.997829] Adding 257332k swap on /dev/zram4. Priority:5 extents:1 across:257332k SSFS [ 7.412815] zram0: detected capacity change from 0 to 52428800 [ 7.985857] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 9.439354] mt7530 mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control off [ 9.439410] br0: port 3(lan1) entered blocking state [ 9.439423] br0: port 3(lan1) entered forwarding state [ 9.441712] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready vm.admin_reserve_kbytes = 8192 vm.block_dump = 0 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.drop_caches = 0 vm.extfrag_threshold = 500 vm.highmem_is_dirtyable = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 32 0 0 vm.max_map_count = 65530 vm.min_free_kbytes = 3448 vm.mmap_min_addr = 4096 vm.mmap_rnd_bits = 8 vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.panic_on_oom = 0 vm.percpu_pagelist_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 64026 vm.vfs_cache_pressure = 100 vm.watermark_scale_factor = 10 ### interrupts: CPU0 CPU1 CPU2 CPU3 16: 293648 157399 117412 191830 GIC-0 29 Level arch_timer 17: 0 0 0 0 GIC-0 30 Level arch_timer 20: 0 0 0 0 MT_SYSIRQ 112 Level timer@10008000 164: 0 0 0 0 mt-eint 141 Edge factory 165: 0 0 0 0 mt-eint 142 Edge wps 169: 0 0 0 0 mt-eint 146 Edge 11240000.mmc cd 173: 0 0 0 0 mt-eint 150 Level mt6397-pmic 192: 0 0 0 0 MT_SYSIRQ 88 Edge mtk-wdt 193: 0 0 0 0 MT_SYSIRQ 115 Level mt-pmic-pwrap 194: 17 0 0 0 MT_SYSIRQ 87 Level mtk_cir 195: 7 0 0 0 MT_SYSIRQ 51 Level ttyS0 197: 979 0 0 0 MT_SYSIRQ 53 Level ttyS2 198: 0 0 0 0 MT_SYSIRQ 44 Level i2c-mt65xx 199: 0 0 0 0 MT_SYSIRQ 45 Level i2c-mt65xx 200: 0 0 0 0 MT_SYSIRQ 78 Level 1100a000.spi 205: 6297 0 0 0 MT_SYSIRQ 39 Level 11230000.mmc 206: 0 0 0 0 MT_SYSIRQ 40 Level 11240000.mmc 210: 0 0 0 0 MT_SYSIRQ 196 Level xhci-hcd:usb1 211: 0 0 0 0 MT_SYSIRQ 197 Level xhci-hcd:usb3 212: 0 0 0 0 MT_SYSIRQ 98 Level 1b007000.dma-controller 214: 1199 0 0 0 MT_SYSIRQ 199 Level 1b100000.ethernet 215: 67981 0 0 0 MT_SYSIRQ 198 Level 1b100000.ethernet 216: 0 0 0 0 MT_SYSIRQ 82 Level mtk-aes 217: 0 0 0 0 MT_SYSIRQ 83 Level mtk-aes 218: 0 0 0 0 MT_SYSIRQ 84 Level mtk-sha 219: 0 0 0 0 MT_SYSIRQ 91 Level mtk-sha 222: 0 0 0 0 MT_SYSIRQ 132 Level asys-isr 223: 0 0 0 0 mt6397-irq 20 Edge mt6397-rtc 226: 0 0 0 0 MT_SYSIRQ 194 Level ahci[0000:01:00.0] IPI0: 0 1 1 1 CPU wakeup interrupts IPI1: 0 0 0 0 Timer broadcast interrupts IPI2: 58870 40717 29469 74914 Rescheduling interrupts IPI3: 88 542 492 708 Function call interrupts IPI4: 0 0 0 0 CPU stop interrupts IPI5: 9152 5086 4958 7521 IRQ work interrupts IPI6: 0 0 0 0 completion interrupts Err: 0